Question about Nordic Track Flywheel For The Healthrider Health Rider E730 Elliptical Model

1 Answer

Nordic track elliptical clunk

Clunking noise from flywheel

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had a clunking everytime I would use my Nordictrac 1300, the clunking was on the right side. I opened everything up searched everywhere was about to scrap it, when I found the wheel that attaches to the stride handle was cracked. it is the wheel that rolls along the ramp while you are striding, looks like a roller blade wheel. I downloaded the manual. looked up the part and found them at Amazon for $60 per wheel, very expensive! after looking at everything, it looked like the wheels that raised the ramp up and down were the same. So using an allen set, I pulled the wheel that raises the ramp up and down and replaced the cracked wheel with it. I then took the cracked wheel and placed it on the piece that raises the ramp up and down, since it doesn't get as much activity as the stride wheel. if you have to do this know you will need a pair of pliers that takes those C ring clamps off, because the wheels are secured with those rings. took a damp rag, cleaned out a little dirt from the rails, tested it out, runs smoothly at low and high intensity, no more clunking!

Posted on Nov 21, 2015

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
maxtreadmill
  • 832 Answers

SOURCE: manual for a Nordic Track Personal Performance

Go to iconservice.com click on to manual Input manufacturer : Nordic Track then model # NTL349050 and you manual await you.

Posted on May 15, 2010

  • 103 Answers

SOURCE: need a manual for a nordic track elliptical cxt

Go here...free manual for downloading a pdf file.
http://www.iconservice.com/CustomerService/manualsProductList.do?manufacturer=&model=29864&modelName=&language=&x=0&y=0

Posted on Jul 27, 2010

ercupa190
  • 12223 Answers

SOURCE: My Nordic Track 1300 Commercial elliptical makes a

Dear Sir:

Thank by your request, I hope everything is o.k
I will try to help you, inmediately.

1)
Pedal Arms
1
Use aflat screwdriver to unseat the tabs that hold the front top cover in place. Thiswill expose the flywheel and pedal arm connection points. Rotate the flywheelby hand and determine whether lubrication will accomplish the repairs. If thebearings are exposed, use a grease gun with an extension nozzle and lubricateboth bearings with lithium grease. If the bearings are damaged or sealed,proceed to the next step.2
Removethe front and side covers on the main frame. Hold the flywheel with one handand use a box wrench to loosen the bolts that secure the pedal arms at eachside of the flywheel. Pull the arms away from the flywheel and remove thebearings from each side.3
Test thebearings as before. Lubricate exposed bearings with lithium grease andreinstall them. Sealed bearings must be replaced. Reattach the pedal arms tothe flywheel. Replace the main frame covers and front top cover to complete therepairs.
If you need further assistance, please reach me.

Thank you in advance, sincerely. God bless you.

E.CUADDRA
MANAGUA, NICARAGUA. C.A

Posted on Oct 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cx1055 elliptical resistance is not working how it should. Once I get to resistance lever 4 or higher it starts out with the resistance but then it slips as you step into it. Any suggestions?


Nordic Track Nordictrack Cx1055 Elliptical Incline Motor For ...

www.fixya.com/search/p3944353-nordic...cx1055_elliptic/resistance
Nordic Track Nordictrack Cx1055 Elliptical Incline Motor For Model Number 285090, ...the bolts that secure the magnet4=if there are slips, the resistance will . ... my schwinn 460 elliptical resistance cannot be changed When I increase the ... Every time I increase the resistance it will go to that level of resistance but within a ...

Need someone to install a new resistance motor on a Nordic ...

www.shopyourway.com > Manage My Life > Questions
Aug 10, 2013 - I bought a CX 1055 Nordick Track elliptical at a garage sale. I noticed that the resistance doesn't really change between levels. ... 100 dollars, but how much would it cost to have someone come out and do the replacement for me? ... I wonder if maybe something shifted when I brought it to my apartment?Missing: slips

[PDF]View Manual in PDF Format - NordicTrack

https://service.nordictrack.com/.../pdfDownload.do?...2...

NordicTrack4. Place the elliptical exerciser on a level sur- face, with a mat beneath it to protect the... The CX 1055 elliptical exerciser is an ... 1055 elliptical exerciser features adjustableresistance ..... press the Odometer button again; the words "My.

Jan 05, 2016 | Exercise & Fitness

1 Answer

Precor EFX 546 Version 1 making clunking noise


Someone needs to look at this as noise issues can be from anywhere and anything.

877-805-1030
Book An appointment

Feb 11, 2014 | Precor EFX 546i Elliptical Version 4

1 Answer

Elliptical noise


These motors has plastic gears...gears may be or is getting bad.

Dec 27, 2013 | Nordic Track NordicTrack CX 925 Elliptical...

1 Answer

My Schwinn 430 elliptical makes a clunking noise when pedalling backwards but not forward. What is causing this?


I have a iron man cdt elliptical that was clunking . I found a shaft on the end of the crank was slipping in and out, inside the bearings. I shimmed it and retightened the retaining washer which prevented it from slipping . Smooth as silk now. It was very frustrating because all seemed tight at first.

Nov 10, 2012 | Schwinn 430 Elliptical Trainer

2 Answers

My Nordic Track 1300 Commercial elliptical makes a loud clicking sound on the left side as the left pedal returns from front to back. What is the fix for this?


Dear Sir:

Thank by your request, I hope everything is o.k
I will try to help you, inmediately.

1)
Pedal Arms
1
Use aflat screwdriver to unseat the tabs that hold the front top cover in place. Thiswill expose the flywheel and pedal arm connection points. Rotate the flywheelby hand and determine whether lubrication will accomplish the repairs. If thebearings are exposed, use a grease gun with an extension nozzle and lubricateboth bearings with lithium grease. If the bearings are damaged or sealed,proceed to the next step.2
Removethe front and side covers on the main frame. Hold the flywheel with one handand use a box wrench to loosen the bolts that secure the pedal arms at eachside of the flywheel. Pull the arms away from the flywheel and remove thebearings from each side.3
Test thebearings as before. Lubricate exposed bearings with lithium grease andreinstall them. Sealed bearings must be replaced. Reattach the pedal arms tothe flywheel. Replace the main frame covers and front top cover to complete therepairs.
If you need further assistance, please reach me.

Thank you in advance, sincerely. God bless you.

E.CUADDRA
MANAGUA, NICARAGUA. C.A

Oct 03, 2011 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

When turned on makes clunking noise. I am able to use the machine when not pluged in. when the electrical display is on makes clunking noise


You may have to disassemble the unit remove the side panels if the foot pedal assembly, arm assembly bearing and bushing are in good shape. You'll have to inspect the flywheel and pulley assembly with the power on & off . It will be a process no doubt.

Jun 13, 2010 | Schwinn 430 Elliptical Trainer

1 Answer

It made a clunking noise then stopped. i looked


The OIL plug is on the bottom of the mower. The fill port should be on the side of the engine. That CLUNK you heard was probably one of 2 things. If you hit something in the grass the flywheel key most likely sheared and will need replaced. If you were using it and did not hit anything then most likely the piston rod broke. If the rod broke the engine would be difficult to turn or... would turn like there was no compression. If it turns normally then once again it is probably the flywheel key has sheared on the top of the crankshaft under the flywheel nut.

Kelly

Apr 19, 2010 | Garden

1 Answer

Bronco 2


Clunk-clunk? Sounds like the flywheel broke. Maybe (if it's an automatic) the torque convertor came unbolted from the flywheel. I hope that I could help you. Best wishes.

Jan 25, 2009 | 1987 Ford Bronco

Not finding what you are looking for?
Nordic Track Flywheel For The Healthrider Health Rider E730 Elliptical Model Logo

1,214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...