Question about Bose Acoustimass 10 III System

1 Answer

Sound comes only fron one rear speaker

Hi i have a sony receiver, bose am 10 III series connected to that. I have had this am 10 II series for 5 years now, no issues. I have a sony-46 HD tv and a Blu ray dvd connected to this receiver. When i play dvd or TV programs via my receiver for surround sund effect, only one rear surround sound speaker works for me.

It used to work earlier, no issues. for past 6 months i am having this issue. I checked the connections on my receiver. it is ok. both the rear jewel speakers (surround) are in working condition, but audio either comes only out of right rear or left rear speaker based on me switching the connection on my bose sub woofer where i have connected the RR & LR jacks, I think this problem is only on the sub woofer side. i do not know how to handle this. Can anybody help

Thanks

Suresh

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you try switching Speakers A and Speakers B button on the AV receiver?

Posted on Sep 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i connect my bose acoustimass 800 with any other receiver?


hi,
Surly you can connect these speakers to any receiver. It has an active subwoofer and 5 passive cube speakers. It can handle power up to 150W.
ok

Apr 28, 2011 | Bose Acoustimass 6 III System

1 Answer

Hi, I have a Cinemate Bose Speaker Series II System and I would like to know if I could connect Stereo Jacks from the Bose Module to a Stereo Receiver without damaging the speakers or subwoofer, and if...


That would depend on the unnamed receiver.

Most receivers have standard analog stereo outputs labeled Tape Out or something similar. You can use them as sources for stereo analog material but their outputs are not variable or under any receiver sound controls so the Bose volume will need to be adjusted. If using a Tape Output, do not select the output for listening on the receiver. THAT would disconnect the other source you're listening to.

If your receiver has a Pre-Out for the desired channels, they ARE under internal sound controls so you could set and forget the Bose volume.

Apr 14, 2011 | Bose Cinemate Digital Home Theater System...

1 Answer

Not sure of how to wire these speakers ( internal ) Bose 901 series iv


Found on Google Search: "bose 901 internal wiring" You must first identify which series you have. The first two series were acoustic suspension, and used nine 8 ohm drivers in a series/paralel configuration. Series III through VI used nine .9 ohm drivers all wired in series. Series III and IV had an additional terminal for use only with the Bose Spacial Control Receiver. Series III through VI are easy to identify, as there are three ports sticking out the back of each enclose. The 1st two series have no ports.

Jan 17, 2011 | Bose 901 VI Main / Stereo Speaker

1 Answer

Just purchased the Yamaha RX-V765 receiver. Have


I too have purchased the same receiver and have the same speakers. Did you get a good solution to this problem and how does it sound?

Jul 26, 2010 | Yamaha Speakers & Subwoofers

1 Answer

Front Speaker not working


Yes, ur setting needs to be changed. On fliping the settings u will realise in one of the modes mostly the surround mode the speakers will work.

Thankyou
Appreciate a good rating from you..

Jul 31, 2009 | Bose?® Acoustimass?® 10 Series IV home...

2 Answers

Bose audio input receiver cable 15 pin


You can buy it on ebay but it's cheaper just to make one. If you can solder, all you need is a female 15-pin d-type connector and a bunch of speaker wire. Here is a diagram of the connections.

eef34d9.jpg

3_15_2013_4_16_30_am.jpg

Jun 24, 2009 | Bose Acoustimass 10 III System

1 Answer

Can I connect my Bose Acoustimass 5 - Series II to Bravia unit?


Yes, there should be no issues using your Bose speakers with your Sony receiver. Sony has a "hookup guide" to help here -

http://esupport.sony.com/US/perl/model-home.pl?XID=M:products:crmportal&LOC=3&mdl=DAVHDX265

Please rate my answer, thanks.

Apr 30, 2009 | Speakers & Subwoofers

2 Answers

Which subwoofer????


Cameron,
I have the same problem, check these link and you will understanding more how it works. My understanding was bose cube cannot work with other receiver directly, it has to be work with bose's woofer (they call module) and they have specific wire to connect. So I give up to switch to bose even they match my deco and go back to traditional. Good luck.

http://www.allbose.com/Question.aspx?id=64108

http://products.bose.com/pdf/customer_service/owners/am6_guide.pdf

Jan 19, 2009 | Bose Acoustimass 10 II System

Not finding what you are looking for?
Bose Acoustimass 10 III System Logo

420 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Speakers & Subwoofers Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5625 Answers

The Knight
The Knight

Level 3 Expert

68229 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Bose Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...