Question about Landice Pro Sport Trainer Treadmill

1 Answer

Landice treadmill we have had a landice pro sport trainer treadmill for several years. today after running for 20 min. the safey screen appeared and the tread mill stropped moving. the magnet is on the machine as normal. however, even after turning the machine off and unplugging for several minutes the treadmill is stuck in the safety mode and will not operate.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 95 Answers

You may want to take off you head board and check all the connection. this is not hard to do. Also when you in there check you cable connection. can you do this?

Posted on May 01, 2009

3 Suggested Answers

  • 95 Answers

SOURCE: I have a Sportsart treadmill

I would think that it can't hurt anything to try another magnet but if you end up needing to buy another one here is one website that sells them: Sportsart TR20F safety key

Posted on Apr 18, 2011

jyackle5
  • 8197 Answers

SOURCE: I need instructions for a LANDICE L7 LTD PRO SPORTS treadmill

You can get the manual on link below.

http://site.thefitnessoutlet.com/landice/LandicePTManual.pdf

Posted on Jan 27, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs a few minutes and then shuts down and beeps


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.

http://electro-medical.blogspot.com/

Feb 17, 2016 | Landice L7 LTd Pro Sports Trainer...

1 Answer

Will not come on. Has power to it. Is there a restart button? a fuse? What?


Hi Hannah.

The manual for this treadmill can be found here:
http://www.landice.com/sites/default/files/Landice_PST5_Manual%2372116_PDF%203-1-15.pdf
What stands out in these instructions is that there is a red, magnetic safety key that must be connected to the panel to run the treadmill (PDF page 4). Also there is a diagnostic mode covered on PDF page 19 that should let you find out if the treadmill thinks it has some other problem.

Hoping this helps
Good Luck
D

Nov 19, 2015 | Landice L7 LTd Pro Sports Trainer...

1 Answer

Error L5


Dear Sir:

This error appear when the elevation motor is not working.

You must Run the software calibration for easy diagnose and troubleshooting.

If you can not run the s. calibration see my personal TIPS. for trouble.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a.

Mar 08, 2012 | Landice L 9 Club Pro Sports Trainer...

1 Answer

I have just purchased a Landice P 7 Pro Trainer and notice that a light is constantly on in the front part of the machine where the motor is located. Is this normal? Also, I am having difficulty inputting...


If no error number as "L5" should work well, with respect to the LED light is normal if you have more questions please send me a E-mail to cardiotech_me@hotmail.com I have the technical manuals, I will be going up soon FixYa.com

Sep 05, 2010 | Landice L7 LTd Pro Sports Trainer...

1 Answer

Treadmill does not start


is a problem with the speed sensor or card connectors are specifically where the motor cables is false or welding is damaged if you can not check you should call a qualified technician to review these two parts and repair.

Jul 06, 2010 | Landice L7 LTd Pro Sports Trainer...

1 Answer

Treadmill belt off center, it is positioned to one side


I found two bolts at the rear of the treadmill that extended toward the tension bar. I felt they were the only way to adjust it. I had been too nervous to try and move them, but that is what did the trick. Thanks

Aug 29, 2009 | Landice Pro Sport Trainer Treadmill

1 Answer

Lites on control board read ( L 5 ) when machine is turned on.


the e1 symbol is an engineering error code for an electronics malfunction (actually is senses the motor not turning and giving an error. The most likely cause is the motor control board
www.twincityrepair.com

Mar 02, 2009 | Landice L7 LTd Pro Sports Trainer...

Not finding what you are looking for?
Landice  Pro Sport Trainer Treadmill Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Landice Exercise & Fitness Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

914 Answers

Tom Chichester

Level 3 Expert

27946 Answers

Duff Howell

Level 3 Expert

403 Answers

Are you a Landice Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...