Question about Laser Phaser 6125 Colour XEROX Phaser 6125 Colour Printer

Open Question

Xerox phaser 6125 showing error 092-310 CTD Sensor error

Display showing CTD Sensor Error - 092-310. Restart printer, however no change after restarting.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
StevenC82
  • 160 Answers

SOURCE: I have a problem with

That is in fact a problem with the printers fuser, which melts the toner to the paper. You should replace the fuser (part# 675K65654). To replace it open the front door, and at the top right you should see a gray clip you push down and then slide the fuser out starting with the right. When installing the new fuser slide the left side in first and then the right. Iteminc.com has this part in stock and ships same day. Hope this helps, good luck. Thanks for using FixYa!

Posted on Aug 11, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phaser 8400 DX printer error 07,010.43:2838


check all cables and ink, restart pc and printer, uninstall printer software, then reinstall, if none of those work, the printer has gone bad and needs replaced.

Mar 31, 2008 | Xerox Phaser 8400 Laser Printer

1 Answer

Ctd sensor error


The protection sheet on the imaging unit is probably still on, remove that and the error should go away.

for more help visit CBR Tech Solutions

Jul 11, 2013 | Xerox Office Equipment & Supplies

1 Answer

Phaser 6128 mfp error sensor ctd


Open up the side panel that houses the toner cartridges. One by one pull out the toner cartridges, with a clean dry cloth clean off the injection port(?) on the cartridge and the injection port on the printer(this will be just inside the where the cartridge locks in. Sometimes these ports get clogged with toner and need a good cleaning, causing a CTD sensor error. Our 6128mfp does this error all the time and we have not had to purchase the new parts to fix the error.

Aug 07, 2012 | Xerox Phaser 6128MFP AllInOne Laser...

1 Answer

I have a problem with the fusor xerox phaser 6125, the display say error 010-397 please help me


That is in fact a problem with the printers fuser, which melts the toner to the paper. You should replace the fuser (part# 675K65654). To replace it open the front door, and at the top right you should see a gray clip you push down and then slide the fuser out starting with the right. When installing the new fuser slide the left side in first and then the right. Iteminc.com has this part in stock and ships same day. Hope this helps, good luck. Thanks for using FixYa!

Aug 08, 2011 | Laser Phaser 6125 Colour XEROX Phaser...

1 Answer

I have a Xerox Phaser 6125 and keep getting message K-Sol error code 042-372 restart printer. Restarting printer does not correct the problem.


042-372 K Mode Sol Error Restart Printer Error 042-372 Restart Printer Each color has it's own solenoid. the K solenoid is the one for the black ink. It may be that toner has clogged the sensor on the inside right wall of the printer. Sensor hole is a small opening and K is the first hole. Clean it with a cotton swab and alcohol. clean any loose toner also. If this does not take care of it. The sensor board or the solenoid itself needs to be replaced.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Jan 19, 2011 | Xerox Phaser 6125 Laser Printer

1 Answer

Laser Error Error message 061-370 for Xerox Phaser 6125


From the service manual:

Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Laser Unit for correct
installation.
Is the Laser Unit correctly installed?
Go to step 3. Reinstall the
Laser Unit. Go
to step 2.
2 Cycle the power.
Does the error still occur?
Go to step 3. Complete.
3 Check the wiring harness connectors
P/J40, P/J41, P/J411, and P/J412
between the MCU Board and the Laser
Unit.
Are the connectors securely
connected?
Go to step 5 Reconnect the
connectors. Go
to step 4.
4 Cycle the power.
Does the error still occur?
Go to step 5. Complete.
5 Replace the Laser Unit (page 8-31).
Does the error still occur?
Replace the
MCU Board
(page 8-59).
Complete.

Jan 31, 2009 | Xerox Phaser 6125 Laser Printer

Not finding what you are looking for?
Laser Phaser 6125  Colour XEROX Phaser 6125  Colour Printer Logo

Related Topics:

2,400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Laser Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Laser Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...