Question about Hotpoint Ultima WF860 Front Load Washer

2 Answers

Hotpoint BWD129 stuck in rinse phase

A hoptpoint BWD129 shows wash and rinse LEDs on solid when the door is closed. The door also locks as soon as it's closed and the power is applied. However the drain pump does not run. None of the controls have any effect on the machine. The machine has been emptied of water. The drain pump impeller rotates freely and a resistance check of the motor is not open circuit. The water level switch appears to operate OK (I've taken it off and blown into it and seen a circuit made). Is there any way to reset the machine or has the controller gone faulty? One strange thing I found was a plastic ball in the drain sump, but it looked like it belonged there (intended to stop the drain pump sucking hot air out of the machine during drying perhaps?)

Posted by on

  • Anonymous Jan 10, 2009

    yes i have the same problem

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi Tom, im having the same problem you mentioned. what resistor did you use to prove this?

cheers rob

Posted on Oct 20, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Problem was caused by a faulty water temperature sensor. The clue was that the owner reported increasingly hot washes, then the machine stuck at rinse. A test resistor replacing the sensor allowed the cycle to finish. A replacement sensor is on order.

Posted on Feb 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get the door to close and lock? I just moved it. Is there a trick to this?


How to fix a washing machine door lock in a Hotpoint ...

? 4:21
https://www.youtube.com/watch?v=p14EEa4AYGM
Jun 4, 2010 - Uploaded by eSpares
For all your washing machine spare parts go to http://bit.ly/1828iPF In this video, Rory shows us how to fix the interlock and door release mechanism on a Ho... ... How to Open a Washing Machine Door that's Stuck Closed - Duration: 1:30. eSpares 332,545 views ... Get video URL at current time. Getembed ...

How does a washing machine door interlock work? - White ...

www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help

Jan 16, 2016 | Washing Machines

1 Answer

My hotpoint aqualtis model number aq9f 492 u is showing f6 what does this mean


F06 Door lock fault
Issue: Washing machine door cannot be opened or closed / when the door is closed the machine the programme will not start.
Advice: If your washing machine door will not close, please check for any obstructions in the door lock.

Dec 29, 2015 | Hotpoint Washing Machines

1 Answer

Wmf540 hotpoint washing machine


This video will show you how to open your Wmf540 hotpoint washing machine door that is stuck shut
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 08, 2013 | Hotpoint Washing Machines

2 Answers

I have a Hotpoint BWD129 washer/dryer and it appears to be overflowing during its second rinse (the water is coming out underneath the tray where the fabric softener goes in).. It is as though the...


Hotpoint BWD129 This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 19, 2011 | Washing Machines

2 Answers

Hotpoint Washing Machine (W540) stopped working, LEDs flash....?


You must get the filter out, as there is a very good chance that this is the prob, keep unscrewing it and try to move it about, then screw it back in again , and then out again, hopefully this will dislodge whatever it is that is holding the filtter in.
Plz rate thiese comments.
Thanks.

Dec 27, 2008 | Hotpoint Aquarius WD63 Front Load...

2 Answers

HOTPOINT BWD129


Please provide more details about your appliance. What brand and the age.

Nov 06, 2008 | Hotpoint WD52 Front Load Washer / Dryer

1 Answer

There is a series of lights flashing on my Hotpoint BWD129 washer/drier. The lights flashing are the 'door locked' light as well as the 'super wash' and '1200/600' lights. This coincides with the machine...


hi there,
i had similar problem . there is a blockage in the fllter , probably a small sock. the filter is at bottom right hand at front of machine .
turn anticlockwise to open.

regards
big eck

Aug 04, 2008 | Hotpoint Washing Machines

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

801 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...