Question about Whirlpool Cabrio WTW6600SBT Top Load Washer

2 Answers

How do i take the tub out of the cabrio washer?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 79 Answers

Look it up over here -
Whirlpool Cabrio Washer Manual

Posted on Mar 20, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Whirlpool Master
  • 9,472 Answers

I have the complete service manual for the Cabrio washer. Go to
http://appliancecafe.com and click on the repair forum link on the top of the page, signup for the forum and then you will have access to the service manual area. Go to the washer section and the Cabrio service manual is the very last post. Let me know if you have any problems getting it.

Posted on Nov 28, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Whirlpool cabrio loud noise


Check your bearings. This post will show you most of what you need to know about your bearings:

http://www.squidoo.com/how-to-replace-bearings-in-a-whirlpool-cabrio-maytag-bravo-or-kenmore-oasis

Nov 06, 2012 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Whirlpool Cabrio makes excessive noise during spin cycle


Your model has a bearing under the tub which is probably going bad and needs to be replaced. cabrio washer bearing replacement YouTube

Oct 28, 2012 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Loud noise while spinning, sounds like a bad berring


You are absolutely right. Your washer has bad tub bearings, the Cabrio washers are notorious for this problem. The bad news is that the bearings cost over $300 just for the part alone, not including paying a technician to come out and replace them. If you can tolerate the noise then you can continue to use the washer but it will eventually completely go bad, but this will give you time to find a different washer. The top three problems with the Cabrio washer is the tub bearings ($300+), the main control board ($200), and the drain pump cracking and leaking all over the floor ($100).


Hopefully I have helped you out, sorry it wasn't good news.

Dec 15, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

2 Answers

I have change stuck is washer making noise when washing. How do I get it out


If this is a Whirlpool Cabrio, it has two pumps. One is the drain pump and the other is a recirc pump. In most cases, loose change an other items end up in one of these pumps. The following link explains how to access and check the pump(s) on the washer for obstructions.

http://www.fixya.com/support/r4155097-checking_drain_pump_whirlpool_cabrio

If you have something stuck in the wash tub, you will need to remove the washplate in the center of the wash tub. Follow these steps:

1. Lift the washer top panel by locating the retaining clips in the seam along the front (about two inches in from each side). Use a putty knife to push in while lifting on the top panel to release.

NOTE: Its a good idea to tape the lid shut to prevent it from flying open when you lift the washer top.

2. Remove the wash tub ring. This is the plastic ring around the perimeter of the top of the wash tub. There are a series of release tabs around the tub that you can pry with a screwdriver.

NOTE: The washplate will not come out with the tub ring in place.

3. With the tub ring removed, pop the center post cap off the washplate. Locate the center nut and remove. Hold the washplate with one hand as you loosen to keep it from turning.

4. Lift the washplate out of the tub.

With the wash plate removed, you should easily be able to access anything stuck in the spin basket.

If you have any questions, or if this is NOT a Cabrio, please post back and let me know. I hope this helps you.

Mar 18, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

My cabrio top load washer leaks from underneath during the wash cycle it not the draining hoses


there is the main tub seal that could be leaking and it is between the tub and transmission.

Jan 10, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Whirlpool Cabrio Washer- When draining, water leaks out of hole


probably rubber hose from tub to pump broke, access from back or bottom, (cabrios are open bottom) pump in rear. there is a recent bulletin about tub ring not channeling water from dispenser completely into tub

Mar 07, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

523 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2128 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...