Question about Televison & Video

1 Answer

My sharp aquos lc30 ad-1e won't turn on from standby.

Yesterday I tried to turn on the T.V, it clicked from the standby red to the green and back without turning on, it did this a few times emmiting a clicking noise and eventually turned itself on. Today I again tried to turn it on but in only flashed red intermittently, with no clicking and no sign of a green light. Please help!

Posted by on

  • Skimocat Mar 12, 2009

    My 30" Sharpe has the same problem. On turning on the tv, the red light goes out and the "please wait" comes on for about 2 seconds then goes blank. After about another 3 or 4 seconds the green light comes on and there is sound but no picture. Took it to a repair shop and $300+ dollars later got it back. Worked for a month and a half and started doing the same thing. I did unplug the tv and replug and that did seem to make it work correctly for a couple of days, but now it is doing it again. Seems odd that this continues. I think that I will contact the repairman again. If he is unwilling to fix it for nothing, I will just go out and buy another brand - I cannot recommend Sharpe for anyone to buy.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 59 Answers

Hi you might have to contact the place where you bout the tv an let them kno your problem if they cant help you then call sharp and let them know your problem your tv is covered for one year so if you had your tv less than a year let them know that also

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Toshiba remote control se-r0077 sometimes works to control the DVD player and other times it doesn't. I've tried new batteries and the problem still persist s


One of the best ways to check if an infra-red remote controller is working properly is to look at it using a camera. (a webcam or phone camera will work) The camera will see the infra red radiation as visible light. If the LED lights up (on camera) consistently when buttons are pressed, then it may not be the remote at fault, but rather the receiver in the DVD player. Most of the time though, it IS the remote control at fault, and these are usually easy to get working again.

Couple of things to check are:

1) the battery terminals...
Batteries can leak and corrode the terminals in the battery compartments. Signs of this include rust, green coloured contacts, or a crystalline deposit. If you see any of this then clean the contacts using metal cleaner or some methylated spirit and cue-tips.

2) Broken wires connecting battery terminals to the circuit board...
The soldering in some remotes can be rather poor, and wires can sometimes come loose, especially if a remote has been dropped or bashed about a bit. Unscrew the remote and check everything is connected properly


3) Dirt under the buttons...
This can prevent a button from making contact with the circuit board properly. Unscrew the controller and separate the rubber button pads from the circuit board check for dirt both underneath the pads AND on the metal contacts on the circuit board. Clean as required with methylated spirit and cue-tips and then reassemble.


Hope that helps!

Jan 07, 2017 | Toshiba Televison & Video

1 Answer

Sharp lcd tv. Grn lite flashing, reset by unplug, vol + ch - , plug in. Tv came back on, after few mins screen goes blk, have sound. turn off and on picture back for few minutes, goes blk, snd ok.


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

Jan 07, 2017 | Sharp Televison & Video

1 Answer

The color on my TV is all pink. I have tried a hard reset but it didn't help.


Your TV has lost a GREEN color from a basic color palette (Red-Green-Blue). It is often caused by:
- damaged LCD cable (which connects the display with a signal board inside the TV),
- damaged video signal cable (ex. SCART, HDMI, VGA),
- damaged video processor (on the signal board).
I can't give you a more accurate answer, because I don't know what is your TV mark and model and, in what situations you have the problem.

Jan 19, 2015 | Televison & Video

1 Answer

I have checked cables and different methods of connecting, but the white and red audio out of my PVR appear to have stopped putting out sound.


Go through the setup of the PVR and check the sound settings. It sounds like it's only producing digital audio, that's why it works with HDMI but you want analog, so set the audio to stereo, or try every setting to see what works!

Jan 19, 2015 | Televison & Video

1 Answer

What is password for Sharp tv 21Mf2-Amk2 ask


Finding the Manual   Go to the Sharp website, look it up and download it. It should be there.

Nov 03, 2014 | Televison & Video

1 Answer

Sony bravia shuts off


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Aug 30, 2014 | Televison & Video

1 Answer

Can't switch off tv


All tvs draw a current so long as they're plugged in, this is what allows a remote device to power them on. Modern tvs will generally have a light to designate this (I think this is what you're referring to as standby). The only way to cut the current to your tv would be to unplug it or if it's connected to a surge protector, switch that off.

Jun 28, 2014 | Televison & Video

1 Answer

My alba telly won't turn on it glee ps flashing blue what should I do


Sounds like your power supply inside the unit is bad. What is the make and model?

Mar 11, 2013 | Televison & Video

12 Answers

Comcast remote code for 42in sharp aquos lcd


the 10093 code worked perfectly!!! YOU ROCK! the codes in the comcast manual dont work. i don't have an aqquos, but a regular sharp hdtv... purchased in nov '07

Dec 14, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71705 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

67930 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...