Question about HP OfficeJet 6210 All-In-One InkJet Printer

1 Answer

Printer Error Message HP AIO 6210 printer

Printer Error Message

Error:oxb9a67af165: HW Interrupt

Flashing lights
I have tried reinstalling the printer but I can't get it to work.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 731 Answers

Hi

If you find the lights flashing, we could try resetting the printer.I have explained the reset procedures below

POWER DRAIN:-Turn off the printer, Unplug the power cable from printer and from the wall outlet.Press and hold ON buton for 30-60 seconds.


PARTIAL RESET:-Unplug the printer power cable while its ON, press and hold # and 3 button and connect the Power cord while holding.Wait untill the ON light flashes, then release the buttons.

----(for below reset cartridges must be removed out)---------

SEMI_FULL RESET:-Remove the ink cartridges, Unplug the printer power cable while its ON, press and hold # and 6 button and connect the Power cord while holding.Wait untill the ON light flashes,or wait for 20 seconds,hen release the button.If the printer goes off dont worry release the button and Push the ON button.


FULL NVM RESET:-Take the Ink Cartridges out, Unplug the printer power cable while its ON, press and hold OK and CANCEL button and connect the Power cord while holding the buttons.keep Holding the buttons until the printer goes off ,release the button and Push the ON button.

Thanks
Riz

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson D88 will not print, both red lights flash, message remove obstruction switch off and on. No change still 2 redlights flashing


The Lights can flash on an error and also iff the INK levels are down. You must check the ink levels and try to do a reset with printer software reinstalled.
Remvoe pinter from the PC, unistall and then reinstall to see if the printer shows the INK level exactly. If not replace INK cartridges to confirm.

Nov 16, 2010 | Epson Stylus D88 InkJet Photo Printer

1 Answer

HP PSC1610 locks up with error


Please place any document on the glass bed and then press the copy button and then check if it copies with any error, also try multiple copies, if you get the 0x error again on the printer display, it is ink system failure error code that you get , let me know the result, I would provide you the further steps....

Nov 21, 2009 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Error 50c, recieving this error when trying to print or make a copy


Hi there Error 50c


It works for the 940 it may work for the 960 too.
Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

1) Press Power to turn the printer off.

2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

3) Turn the printer on.
The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

4) Remove the color ink cartridge.

5) Lower the printer (scanner unit) until it is completely closed.
If the error message displays again, replace the black cartridge with a new black cartridge.

If the error message does not display, repeat steps 1–3 and then go to step 6.

6) Reinstall the color cartridge and remove the black ink cartridge.

7) Lower the printer (scanner unit) until it is completely closed.

If the error message displays again, replace the color cartridge with a new
color cartridge.
If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
8) Lower the printer (scanner unit) until it is completely closed.

If you get the error message again, while both cartridges are installed, replace both of the cartridges.

Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

You may have to buy a new cartrige.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Oct 07, 2009 | Dell A960 All-In-One InkJet Printer

1 Answer

Error 50c Using real Dell carts Tried reinstalling drivers still


Hi there Error 50c
Here we go try this out.

Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

1) Press Power to turn the printer off.

2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

3) Turn the printer on.
The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

4) Remove the color ink cartridge.

5) Lower the printer (scanner unit) until it is completely closed.
If the error message displays again, replace the black cartridge with a new black cartridge.

If the error message does not display, repeat steps 1–3 and then go to step 6.

6) Reinstall the color cartridge and remove the black ink cartridge.

7) Lower the printer (scanner unit) until it is completely closed.

If the error message displays again, replace the color cartridge with a new
color cartridge.
If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
8) Lower the printer (scanner unit) until it is completely closed.

If you get the error message again, while both cartridges are installed, replace both of the cartridges.

Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

You may have to buy a new cartrige.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Mar 26, 2009 | Dell A940 All-In-One InkJet Printer

1 Answer

Canon Pixma MP750 Printer


try to reinstall the printer cartridge

Jan 15, 2009 | Canon PIXMA MP750 All-In-One InkJet...

1 Answer

I have a HP Deskjet F380 All-in-One. Error light keeps flashing.


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 04, 2009 | HP DeskJet F380 All-In-One Printer

2 Answers

Epson C48 red and green lights flashing alternately


Only Solution is Re-burn printer firmware.

Mahesh DG, Pune

Sep 08, 2008 | Epson Stylus Photo 1280 InkJet Printer

1 Answer

Hello, RE: LEXMARK Z1380 The light on the power button keeps flashing and im receiving a message telling me the printer cannot communicate with the PC. I have reconnected all the wires, i have also...


This is going to sound crazy, but I just spend days with the same cannot communicate with the printer problem with my Z1300. I was ready to buy a different printer when I decided to look on Lexmark's site. The fast blinking power light indicates a paper jam. I thought... sure.. uh huh. I turned off the printer, took the stack of paper out, which didn't seem jammed at all, put one piece in, turned on the power ... and the blinking had stopped. Yep ... after doing the countless fixes I found on the net... including reinstalling drivers.. deleting usb ports.. etc... it was a paper jam! The printer works fine again. Hey.. what would you expect from a printer that cost under $25. lol

Jul 15, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
HP OfficeJet 6210 All-In-One InkJet Printer Logo

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...