Question about Kenwood CD deck E222

1 Answer

Is there a manual for cd deck E222

Is there a manual for this deck as we are wondering whether a ipod will be able to be plugged into it.

Posted by on

  • 1 more comment 
  • hithwentinuv
    hithwentinuv Nov 28, 2012

    The Manual doesn't have that model. The e222 has 2 knobs whereas all those models have switches.

  • kakima Nov 28, 2012

    Sorry. That was the KDC-222 manual, not the E222 manual. I did find one version of the E222 manual, but it's in Japanese:http://manual2.jvckenwood.com/files/B64-...

  • kakima Nov 28, 2012

    There is an AUX input jack in the lower right corner, as shown in illustration B on page 10 of the Japanese manual. You'll need a patch cord to go from the iPod's headphone jack to here, but then you'll be able to play music from the iPod through the Kenwood.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Kenwood Master
  • 102,366 Answers

You may download a copy of the manual here.

Posted on Nov 28, 2012

  • kakima Nov 28, 2012

    You may download a copy of the manual here.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Controlling my iPod.


This model radio is not iPad compatible. All pioneer radios display on the box whether or not they have iPod or Android capabilities. It notices your iPod because of the data and power connection it emits when it's plugged in.

http://foraudiogeeks.com/

Apr 16, 2016 | Pioneer Car Audio & Video

1 Answer

Does the Kenwood KDC MP5032 have an aux input? If so, where is it?


Hi there,

Kenwood utilize the CD Changer plug in the back (which acts as a secondary Aux input), to operate external iPod devices.

This is done with the aid of an Adapter Lead - it has the 13-pin DIN plug on one end (plugs into the rear of your unit), and an iPod plug on the other end (plugs into your iPod).

Depending on the "Generation" of your external iPod device, you will need to buy the appropriate Kenwood adapter cable. These are: KCA-IP102, KCA-IP202 or KCA-IP302.

There may be some aftermarket (3rd party) cables that may do the same job.

Just ensure you read your Kenwood manual, as the Kenwood unit may be limited to the types of files (i.e. formats) it can read & play.

Hope this explains....

Cheers,

Dec 31, 2012 | Kenwood KDC-MP5032 CD Player

1 Answer

I plug in my ipod using the alpine ipod chord and starts to charge but ipod wont show up on deck and wont play my ipod, why does it fo that?


OK....as an idea I have come across by accident..when you plug it in and it asks for pc suite or mass storage device, hit the mass storage button and it should work for you.......

Feb 24, 2011 | Alpine CDE-102Ri CD Reciever, iPod and USB...

1 Answer

Hi there, have just purchased a car with a jensen in dash dvd player. it came without a manual and we are not sure how to use it properly. how can we source a manual. also does it have a plug in for...


Is there a part number of the In Dash DVD/CD? I mean I could pull a manual would give you a hint how to use the deck.... This is the best I can do without knowing the model number of your deck... Hope this helps

http://www.docshare.com/doc/225137/VM9510-Manual

Sep 23, 2010 | Audiovox Jensen In-Dash DVD/CD Receiver w/...

2 Answers

Where is the cd player the radio says that there is no disk


Most cd players are in the main dash panel. If you do not have a cd slot, you likely don't have a cd player. These vans usually don't come with them and you have to install an aftermarket cd player.
If you have a cd disc changer, it is likely in the very rear of the vehicle.

Nov 17, 2009 | 2000 Ford Windstar

1 Answer

Ipod wont charge while connected to radio deck


just check it out....whether your ipod point is thoroughly connected with the plpine pin or not or u can check u'r ipd cell energy.

Nov 04, 2009 | Teac SRL200i/B Clock Radio

1 Answer

Kenwood kdc-mp532u Auxiliary?


http://inform3.kenwoodusa.com/manuals/KDCX590.pdf - Manual

iPod Adapter Compatible: Using the KCA-iP500 iPod Control Interface, you can connect your Apple iPod digital music player to this receiver. The interface (item # 113IP500) plugs into the receiver's 13-pin CD changer input and controls the iPod through the receiver's controls, as well as displays the iPod's text information right on the receiver's display.

Dec 30, 2008 | Kenwood KDC-MP532U

3 Answers

Ipod Connection through RCA Cable


Actually, what I think gbaity is doing is utilizing his IP(Interactive Pioneer)-Bus port in the back of the DEH-P3000, which is an input port designed to allow the deck to use an external multi-disk CD changer. All you need is the CD changer, then change the input source from your deck to "M-CD". There are folks on eBay and other places that sell a cable that pluggs into that very same port. They are designed to allow the unit to accept input through the IP-Bus from an ipod or just about any low-level input that you can pass through the RCA jacks. I have the same deck, and also just purchased an ipod cable for the IP-Bus, and it also does not work. I have been told that I need to switch the "M-CD" input source to "AUX" as the input, but I do not know how to do that. pressing the input source button only displays "CD", "M-CD", and "FM/AM". Does anyone know how to add "AUX" to the choices or otherwise show us how to make these cables work? Thanks - TomR

Aug 23, 2007 | Pioneer DEH-P3000 CD Player

Not finding what you are looking for?
Kenwood CD deck E222 Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4834 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...