Question about Toshiba e-STUDIO 120 Laser Printer

2 Answers

Toshiba e-Studio120 no printing

I have a Cnet CNP-102U Print Server through a router then to the printer, the connection is good but when the printer suposly start printing the paper not show up, i hear the sound like is printing but no paper came up

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where can i find drivers for the e-studio 120???

Posted on Jun 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this, is in some cases I have been able to clear the paper track of debris that was deposited there over time.
Worth a try, as I have fixed a number of printers this way, saving costly repairs.
Hope this helps. Bud

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect my printer to a router


This model Canon printer has onlt an USB connection to a computer.
The only way to connect this printer to a router is to install a printer server with an USB connector, connect the printer to the print server and then connect the print server to the router using a LAN cable.
The printer driver needs to be installed on all the computers on your network and then to the printer properties then Port tab and add a TCP/IP port then configure this port with the print server's IP address.
Do a test print and if the test print is OK then printer is installed correctly.

May 29, 2012 | Canon iP2700 Inkjet Photo Printer

1 Answer

Can I connect my epson dx4450 direct to my router


This model printer has only an USB printer connection and cannot connect into a router unless the router has an USB printer connection OR the printer is connected to a print server, then the print server is connected to the router.

Mar 09, 2012 | Printers & Copiers

2 Answers

Can the epson R220 print wireless


It can't print wirelessly with the native hardware. It has a USB 1.1 connection. You may be able to find a print server that can connect to a wireless router. However, you will need to check the specifications. Some print servers will only work with select printers or OS combinations.

The specifications for the R220 are here: http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&infoType=Specs&oid=58654761&category=Products .

I hope this helps.

Cindy Wells
(note since this is an older printer with a USB 1.1 connection, you can expect the printer to be slow with a wireless connection. If your signal strength drops, you may need to reboot everything (computer, print server, router and printer).)

Mar 21, 2011 | Epson Stylus Photo R220 InkJet Printer

2 Answers

How do i set up my wireless canon printer to my laptop? I keep getting messages saying can't find the printer.


Difficulty: Moderately Easy
Instructions
Things You'll Need: · Wireless print server
· USB printer
· Ethernet cable
· Computer
1. Step 1
Obtain a wireless print server that is compatible with both your wireless network and your printer. While the printer’s documentation may not explicitly say that it is compatible with a print sever, many are compatible, and this can be verified by checking the website of the print server’s manufacturer. If you have a multifunction printer, only the print function will work with most wireless print servers, though a few have recently added support for scanning and the printer’s other functions.
Step 2 Read all of the documentation that came with the wireless print server. The manual will detail the specifics of the installation routine.
Step 3 Connect the printer to the wireless print server via the USB cable. Connect the print server’s Ac adapter and turn the unit on.
Step 4 Connect an Ethernet cable between the wireless print server and your computer. This will be used for the initial setup only.
Step 5 Insert the CD supplied with the print server into your CD-Rom drive. Start the software if it does not start automatically. The application will walk you through the installation process, which includes setting the unit’s IP address, setting an access password, configuring it to connect to the wireless network, installing the drivers that allow the print server to use the printer and installing the print drivers on your computers.
Step 6 Choose how your print server will be addressed. Most units are set up to use dynamic addressing by default, which means that your wireless router will assign an IP address to it. This allows the server to be easily installed on the network, but it also means that the IP address of the printer may change over time. The other option is to assign a static IP address to your print server. This option is more reliable, because the print server will always use the same IP address, making it easier for the computers to find the printer and easier to access the print server’s online configuration application. If your router has the IP address of 192.168.0.1, for instance, set the print server to something like 192.168.0.2 or 192.168.0.3, as long as another device does not use that address.
Step 7
Set a password to be used to access the unit’s online configuration application.
Step 8 Configure the print server to access your wireless network. Give it the same SSID network name as your router and set it to use the same wireless channel. If encryption is used on the router, enable encryption on the print server, and enter the encryption key or password.
Step 9 Follow the instructions given by the print server’s software for installing printer drivers on the unit.
Step 10
Disconnect the Ethernet cable and allow the unit to connect via the wireless network.
Step 11 Install the printing drivers on each computer that will use the printer.
Step 12 Access the print server’s online configuration application to verify all settings by entering the IP address of the unit into a web browser, using the “http://192.168.0.2” format. Enter the administrator name and password.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 21, 2010 | Canon PIXMA MP600 all-In-One InkJet...

2 Answers

Can you connect it to your computer by wireless


Sure can. Just buy a wireless print server with USB output. They are made by most big names like: Trendnet, D-Link, Linksys, Netgear, etc. I see them on Ebay for low prices 5-20 dollars.
Just make sure you get a match to the router you have for frequencies. For example: G or N

Good Luck

Jan 03, 2010 | Samsung CLP 300 Laser Printer

1 Answer

Need my laptop to communicate wireless to printer


If the printer does not have a built-in network card/print server then there is a couple of ways to do this.
If you have a desktop computer connected to the wireless router with a LAN cable, then connect the printer to the desktop computer and make this printer a shared printer on your network. This means that the desktop computer and printer needs to be on when you want to print from the laptop.
The other way is to purchase a print server, connect the printer to the print server and connect the print server with a LAN cable to the Wireless router.
If you don't have sufficient network ports on the wireless router then you need to purchase a hub. Then connect the hub and wireless router with a LAN cable and then the print server to the hub and other computers to the hub.
Setting up the wireless printing will depend upon which method you want to adopt and I can advise you when further when you are ready.

Aug 02, 2009 | HP Photosmart 3310 Printer

1 Answer

Toshiba e-studio120, H4 error code. what it`s meen??


seems like heat roller problem.
enter code C, exposer light buttom, C and exposer light buttom , then all the indicator in the machine goes off. then enter 14 and press print buttom. Now your machine must work. If not Pls refer to technician.

Jul 08, 2009 | Toshiba e-Studio120 Copier

1 Answer

I have a HP OfficeJet K60 printer. I have a Linksys WRT54G V8 broadband router. I would like to set up printer so that I can print from my laptop without connecting the print cable to the laptop.


Do you have the jetdirect print server attached to the printer? If so, follow the instructions for the print server setup before connecting to the broadband router

Jun 07, 2009 | HP OfficeJet k60 All-In-One InkJet Printer

1 Answer

Can't print from my mac to my canon mp980 wireless printer


Sounds like when you added xp you inadvertently installed new print driver on server.
Try rolling back driver. But may drop xp from printing.

Best solution network printer to router bypass server. Will require hard wire from printer to router. disconnect from server may need network card for printer.

Mar 08, 2009 | Canon PIXMA MP980 All-In-One InkJet...

Not finding what you are looking for?
Toshiba e-STUDIO 120 Laser Printer Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you a Toshiba Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...