Question about Televison & Video

Open Question

Cannot program Direct TV remote to Naxa NX-518

We have a Naxa TV (NX-518model) connected to our Direct TV but cannot get the remote programmed because Naxa is not listed in the manufacturers list that have the codes. Can you tell me who makes the Naxa?
The DVD player will not read any more, it just retracts then ejects the DVD. (I am not too concerned with this because we seldom use it)

Posted by on

  • Anonymous May 06, 2009

    I have a NAXA Home Theater NX-822 and no Universal remote will do.

×

5 Suggested Answers

  • 3 Answers

SOURCE: remote control not working and need programming code for cable television/universal remote control

you can get one at

http://remotes.com/


LTD1510
MALATA

Posted on Dec 13, 2007

  • 1 Answer

SOURCE: remote control not working and need programming code for cable television/universal remote control

remotes.com says oerseas item-not available?

Posted on Feb 24, 2008

  • 518 Answers

SOURCE: remote control codes for naxa tv model nx -524

You neglected to post the Remote's Make and Model. However, most Univ. remotes allow you to "Scan" the TV codes one at a time. You would do this and watch for the TV to turn off. when it does, you have the code and can store it.

Geno

Posted on Mar 05, 2008

freetek
  • 5568 Answers

SOURCE: need code for ewc13d4 tv/dvd for direct tv remote

Direct (and Dish) may not have codes available for all brands and models; I know that from personal experience.
You need to got to Direct TV's website to obtain a current list of codes. Even if they have some for Emerson, they may be quite limited in their usefulness.  

Posted on Nov 24, 2008

  • 1 Answer

SOURCE: ilo TV, universal remote

Ilo is made by Orion and/or Sansui.
My Ilo dtv2794B was programmed on Direct TV remote as follows:

In Direct TV mode press 'menu' .
Go to parental ,faves setup
Go to system set up
Go to remote
Go to TV
Select brand (Orion)
Follow directions from this point.

Good Luck>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What are the remote control codes for a naxa tv dvd combo. The remote I have is a onn


DIRECTV - Universal Remote Control TV Codes NAXA NX ...

https://www.directly.com/.../directv-universal-remote-control-tv-codes-n...
Get inside, expert customer support for DIRECTV problems like: Universal Remote Control TV Codes NAXA NX-556 to directv receve directv remote wont connet ...

REMOTE CODE FOR NAXA TV/DVD COMBO # XXXXX

www.justanswer.com > TV
HelloCustomer welcome to Just Answer. Code are relative to the remote control you have. If you don't see NAXA in the code list, you will have to try a code ...

Jan 08, 2016 | Televison & Video

1 Answer

Need a NAXA remote code for dish network Remote


Hopefully you have resolved this issue, but if you have any additional problems or questions, here is some help. Follow the directions below, and that remote will be programmed right away.


1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.


Becki Barned
DISH Network Customer Service

Jun 16, 2010 | Naxa Electronics NX-556 19 in. LCD TV

1 Answer

I am looking fore the uverse remote code for naxa


i install uverse, the auto seek is done by hit and hold TV and OK. wait for lights to flash enter 900 and push play over and over SLOWLY and when the tv turns off, press enter.

NOTE: some tvs WILL NOT program to our remotes

Feb 24, 2010 | Naxa Electronics NX-558 19 in. LCD TV

1 Answer

Can't program direct tv remote no code available


The codes for the Direct TV remote are in the system and show on the TV screen when you set-up the system. If not, it will find them for you by searching for the codes.

Aug 28, 2009 | Naxa Electronics NX-558 19 in. LCD TV

1 Answer

Remote control codes for naxa tv model nx -524


You neglected to post the Remote's Make and Model. However, most Univ. remotes allow you to "Scan" the TV codes one at a time. You would do this and watch for the TV to turn off. when it does, you have the code and can store it.

Geno

Mar 05, 2008 | Televison & Video

1 Answer

Naxa NX-511


Yes, you can. I was able to get my Dish Network remote to work with my Naxa 574 TV. Just follow the directions for the remote and you should be able to use it.

Dec 12, 2007 | Naxa Electronics NAXA NX-571 Television

1 Answer

Universal remote


call for a factory remote at1-800-736-6837

Nov 01, 2007 | Naxa Electronics Naxa NX-572 7" TFT LCD...

1 Answer

NX-574


Check if u are not on A/V mode, return to RF/TV mode and try tuning again, also check your antenna connexion.

Jul 06, 2007 | Naxa Electronics Naxa NX-572 7" TFT LCD...

3 Answers

Universal remote code


need coads for naxa tv dvd combo for an rca remote

Jun 26, 2006 | Naxa Electronics NX-517 Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71611 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

67800 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...