Question about CB Radios

1 Answer

Radio jensen comes on then off now not working at all

Radio not working

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 64 Answers

Check your power wire and your fuse.

Posted on Sep 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Jensen MCD 5110 Marine radio acts like the antenna is unplugged. I can't figure out how to remove the radio from it's sleeve to re-plug the antenna jack (if that is the problem)


I don't know much about marine radios. I am a ham radio operator, but they are much the same, if you do not hear any static (with squelch control turned down), then I suspect you are correct about the antenna. It could be the antenna itself, or the coax line to it, or the connection point at the radio or at the antenna. You're stuck without being able to remove it. If you do and find nothing at the radio, you'll need to check the connection at the antenna etc. Good luck.

Nov 21, 2014 | Jensen Mcd5110 Marine Radio /am/ Fm/ Cd...

1 Answer

Radio working when hot


radio not working or working when hot? you need to buy a can of Mr. freeze. feel around inside the radiowith your fingers to find the hot spot. Shoot some Freeze on it to see if your radio come on.If it does ,. change the component and your radio should work ok.

Sep 28, 2013 | CB Radios

1 Answer

Car radio only works in park


It's not a CB radio, therefore your question should be posted in Cars & Trucks section.

Peter

Mar 02, 2013 | Lincoln 2000 LS Radio

1 Answer

No power inside the radio


Protection diod is probaly bad I would try that first

Feb 04, 2013 | Cobra 29 LTD CB Radio

1 Answer

TRC-481 No sound


test the internal speaker to see that sound is indeed getting to it.Hook an external speaker to it and see if that works.you just may have to change the speaker but it could be more than that. Do thisfor now then repost as to what you did and whether it worked or not because there is more problems and they are internal. Just go with this for now and if it doesn't work you may have to get it to a tech to repair it.

Jan 10, 2013 | Radio Shack Trc-481 Cb Radio

1 Answer

The channel selector will not come on


REPLACE THE TINY BULB...DUH, use a meter to determine positive a neg on supply, hook up backwards and you may blow the bulb..

Aug 10, 2012 | Connex 3400HP Amateur Radio

1 Answer

The volume wont go higher than 12 on my Jensen Mcd5110 Marine Radio/am/fm/Cd receiver W/Detachable face, how can I fix it to go all the way up to 26 plus?


take off the bottom cover ,find the volume switch on the outside then find it on the inside.Now get some WD-40 and spray the control on the inside with a very,very light squirt of WD - 40. Let it set for a while then try it.It should work.

Jul 09, 2012 | Jensen Mcd5110 Marine Radio /am/ Fm/ Cd...

Not finding what you are looking for?
CB Radios Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top CB Radios Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

489 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Steve

Level 3 Expert

3287 Answers

Are you a CB Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...