Question about Audio Players & Recorders
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Tecnics SU-G95 stereo overloaded
Power down,disconnect the speakers and power back up. If it still say's overload, it needs to go to service. If not, check your wires, connections, and speakers one by one to hunt down the problem and correct. Hope this helps
Posted on May 25, 2009
hello ive got a diffrent problem ive got a technics hifi and when u put it onto aux it says txe-rvc and cd is dc its all the wrong way around what can i do thanks
Posted on Aug 29, 2009
Are these resistors near or linked to whatever is on the heat sink? If they are then they are bais resistors and they have burned up due to a fault on the devices on the heat sink.
Resistors are cheap, all you need to do is find out what value they are. This is part of the colour code. However if they are burned then you might not be able to read the code! So you will need the circuit diagram or someone to tell you the value.
The problem however will be if whatever on the heatsink has gone!
It could be an IC since you have lost both channels, unless you have shorted the speaker wires of both channels somehow and blown both right and left amps!
Posted on Nov 27, 2009
Tips for a great answer:
Sep 23, 2012 | Audio Players & Recorders
Mar 16, 2010 | Kenwood Audio Players & Recorders
May 25, 2009 | Technics SUV500 2-Channel Amplifier
Feb 06, 2009 | Panasonic Audio Players & Recorders
Aug 24, 2007 | Technics SA-DX940
36 people viewed this question
Usually answered in minutes!