Question about Grilling
A boom is delayed ignition , first pilot too small blocked pilot jet or wrong size jet in pilot .
2nd pilot out of postion ie pilot brackett not in line with burner .
3rd some of the burner jets could be blocked need to to pricked out one by one a small drill bit works well
4 th gas valve could be slow on opening getting stuck on seating not opening , sort of opening with a jerk ??
Thats what i would look for follow these 4 they should help ,
Posted on Nov 28, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Do you have enough gas pressure coming out of the regulator and gas valve? You'll need a pressure guage for this.
If yes, try taking out the burners and cleaning them with a wire brush, especially the flame spreading sections.
Posted on Dec 06, 2008
SOURCE: no gas getting to bbq
I switched to the new style 20# tank with the new turn-on knob. I couldn't get enough gas pressure to the BBQ burners for all three burners to light or to keep a strong flame on even one burner. The new style tanks have a safety valve on the inside of the tank that shuts the gas off if you turn the knob on too fast because the safety valve thinks there is leak. Shut everything off and then try turning the knob on real slow, especially at first, before turning it all the way on. If that doesn't work (it didn't for me), then replace the large plastic connection valve knob (female end) that attaches the regulator to the tank. Mine was for the old style tank and was black (low pressure). I went to a propane company and had them replace it with a green knob (higher pressure). Took it home and WALA! Everything works fine now. But it was very frustrating trying to figure why I couldn't get any gas to the burners after buying a brand new tank. I hope this helps solve your problems.
Posted on Dec 22, 2008
yes replace it. you can call weber and they will send you one FREE just tell them whats wrong and the model number of the grill
Posted on Aug 27, 2009
Follow manufacturer's recommendation in resetting the excess flow safety device....(Turn burners and LP cylinder off...Disconnect regulator on cylinder. Turn both knobs to high for at least one minute...Then turn them to off...reconnect the regulator to the LP tank...Turn LP valve VERY slowly (30 seconds) until fully opened..then start the grill in the usual manner. ALWAYS TURN THE LP TANK OFF WHEN DONE USING THE GRILL....
Posted on Aug 28, 2009
Tips for a great answer:
Dec 11, 2016 | Kitchen Ranges
Feb 05, 2014 | Heating & Cooling
Jan 12, 2014 | Majestic Fireplaces Majestic Topaz 20ILDV...
Oct 10, 2013 | Majestic Fireplaces Majestic Topaz 20ILDV...
Jan 21, 2013 | Napoleon 36" Zero Clearance Top/Rear Vent...
Sep 21, 2011 | Heating & Cooling
Jun 18, 2011 | Vermont American Tool Company VM450SSP...
Dec 16, 2009 | Humidifiers
Jan 09, 2009 | Heating & Cooling
May 15, 2018 | Grilling
94 people viewed this question
Usually answered in minutes!