Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Water barely trickles out for rinse cycle

Regardless of which cyle I wash/rinse with (warm/cold, warm/warm, or cold/cold) the water comes out fine during the wash cycle but barely trickles out (takes 30-45 minutes to fill) during the rinse cycle

Posted by on

  • thehicks Jan 20, 2009

    Thanks so much for the advice. Worked like a charm!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 93 Answers

Hello,

It sounds like you have some buildup in the cold water valve screen. Where the hose connects to the washer there should be a screen inside the valve. Remove the cold water hose from the washer and clear any debri on the valve screen.

If this doesn't fix the slow cold water flow then you will have to replace the whole water valve assembly. The water valve is the piece that the hoses connect too and supply water to the washer.

If you have anymore questions about this please ask. I will be more than happy to help you out.

Thanks

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SM 8525492A whirlpool washer rinse cycle no water comes out, just hums


when the washer goes into rinse cycle it only uses cold water so clothes don't rinkle,so most likey you have a problem with your cold water,do this,shut down the water to the washer,remove the water lines from the back of washer and mark them so you know how they came off,stick the hoses into the washer if they reach or a bucket,turn on the cold water to see if water is coming out of hose,if water does come out of hose good then stick the cold water hose back on the washer and run it only on cold,if it doesn't fill then you know you have a problem with the water valve on the washer and it's not the house water valve that's bad,and usually if you have a problem with the washer water valve it will just hum and no water will enter the washer so if you hear a humming sound it will be the water valve.tried looking up the model number you sent but it doesn't come up on the parts lookup

Apr 25, 2013 | Washing Machines

1 Answer

Cold water rinse doesn't come in very hard. Just a trickle. Warm works fine. I just had the water shut off due to a water main break which is now fixed and water is back on. Warm wash fills fine. Cold...


Remove the cold water hose and check the screens for debris and clean. Also look inside the water inlet valve where the hose connects there should be a screen in there remove and clean. If this doesn't fix it the water inlet valve will need replacing. Here is a link that will walk you thru cleaning and inspecting the valve http://appliancehelponline.com/topwaterinletvideo.html

Sep 08, 2010 | Kenmore 22422 Top Load Washer

1 Answer

Rinse water barely trickles out of my washer


Do you fill the machine with hot water only?

If so, this is what I suspect. The filters in the inlet hoses on the back of the washer need cleaning. Remove the garden hose connectors, remove filter, clean, replace.

When filling with hot only you get a lot of pressure thru one hose. When you rinse, the best you can do pressure-wise is cold rinse -- but the cold water filter is going to be more clogged than the hot so it delivers less water.

When you use warm rinse, you get mediium pressure thru both lines, again less water than al hot on filling the machine.

Apr 29, 2009 | Washing Machines

1 Answer

Cold water only works on rinse cylce not was


post model number in problem description

Apr 04, 2009 | Maytag Washing Machines

1 Answer

Washer does not fill quickly for rinse cyle


check your water pressure if its good check the valve on the back of the washer to see if anything is stopping it up . you may have to replace the water valve

Mar 29, 2009 | GE WBSE2090A Top Load Washer

1 Answer

Cold water trickling out of machine during rinse cycle


Check cold water pressure to washer. if pressure o/k then you will probably need a new cold inlet valve fitting.

Dec 13, 2008 | Washing Machines

1 Answer

Washer fills slow only in the rinse cycle


ck and clean screens first both sides be sure hoses are not reversed timer has no affect on fill rate if screens are clean replace valve

Sep 19, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Rinse cycle, water won't work


It sounds like you either use warm or hot water for the wash cycle. If this is the case, you probably have a cold water solenoid problem on your water inlet valve (also known as a mixing valve on some washers). Most people use warm or hot water on the wash cycle. The water inlet valve has two solenoids. One for hot and one for cold. It uses a combination of the hot and cold solenoids to make warm water. The rinse cycle on most washers is a cold water rinse only, however. This would explain why the water appears to flow normally when it fills during the wash, and only trickles when it rinses. If you live in an area that has hard water, or if you use well water, these valves commonly clog with sediment. You can shut off the water, remove the hoses, and attempt to clean the sediment screens to see if the water flow improves. If it doesn't, you will need to replace the valve. The following link epxlains how:

http://www.fixya.com/support/r600647-replacing_water_inlet_valve_kenmore

I know the link says this is for a Kenmore or Whirlpool, but also applies to a Roper. A replacement valve can be ordered on line at searspartsdirect.com. Just type in the model number and the part you need is located under the "Controls and Rear Panel" heading as item number 18 (part #285805). This is a very simple and inexpensive fix if you wish to perform the repairs youself. Not to mention, you can potentially will save hundreds by avoiding the labor charges of a service call. I hope this helps you. If you require additional assistance, please let me know. Hopefully, a good cleaning will do and you won't require parts.

Sep 12, 2008 | Roper RAS8445KQ Top Load Washer

2 Answers

GE Washing machine cold water barely dribbles in


Yes remove the hose from where it connects to washer look inside water valve and remove plastic screen with needle nose pliers Without damaging it. Also make sure that it gets back in proper as the valve will be damaged without it.

Jan 19, 2008 | Washing Machines

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

917 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...