Question about Yamaha RX-V630 Receiver

2 Answers

Yahama receiver Rx-630 not working

I have a Yamaha Receiver RX-630. It's 3 years old and had been working fine all thru these years. Just recently i saw a message on its deplay about " SP wires" and suddently it shut down after that. Now i am not able to power it on. I hear relay clicking sounds whenever i try to power it on, which feels like shuts receiver off immediately due to some power circuitary mechanism. I idea what's going on and suggestion how to receover fromt his.

Posted by on

  • 2 more comments 
  • Ravi Singh Jun 07, 2007

    Thanks for the feedback. I have reomved all wireless from the receiver but it still doesn't power om. Basically it shuts immediately after i press the power button.

  • kirby42 Mar 30, 2008


    I have the same problem with my RX-V630. Just happened last night. Push the 'power on' button ...just clicks, no back light comes on, no speaker noise, nothing.
    I see these previous posts are pretty old, any advice...?
    Thanks

  • Anonymous Feb 17, 2009

    RX v3300 Reciver, same problem, no back light, hear the relay and off it goes. Had been working for 3 years.

  • Matthew Mar 26, 2013

    Hey Sorry I cant shed any light, however I did remove the cover and followed the "clicking" shut off noise to one of two plastic what looks like square black legos. I can feel the click.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

If you have decided to get rid of this receiver, I would like to purchase the remote off of you, mine died and I'm looking for a replacement. Mark mgfranz@yahoo.com

Posted on Jul 30, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 56 Answers

The problem might be caused by two major circumstances. 1)Touching wires 2)Overheating. I suggest you unplug all wires connected to the amp then turn on the amp. If it gets turned on then we know that the problem is that you have touching wires. If there is a short circuit somewhere, get rid of it. The ventilation is another important issue that you have to pay attention. It simply causes overheating.

Posted on Jun 07, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All of a sudden I have no sound at all regardless of what the input is. Any thoughts or has it just died. I've had this for many years.


RX-V540 - RX-V - AV Receivers - Audio & Visual ... - Yamaha

usa.yamaha.com > ... > AV Receivers > RX-V

Yamaha CorporationRX-V540. Discontinued. Natural Sound Home Theater Receiver. 0.0. (No reviews) ...The RX-V540 is a full-featured home theater receiver ready for all formats. .... their favorite stations or to have musical genres, such as all the jazz stations,

No sound on yamaha rx-530 stereo fm receiver - Fixya

www.fixya.com/.../t25422640-no_sound_yamaha_rx_530_stereo_fm
Feb 13, 2015 - no sound on yamaha rx-530 stereo fm receiver nothing,just no soundcomming out of speakers ... Does your TV have any audio outputs such as RCA perhaps? .... Suddenly no sound is coming from my speakers except for my subwoofer. On certain settings some of the speakers work but not all of them.

Jan 12, 2016 | Yamaha RX-V540 Receiver

1 Answer

I Have an Yamaha RX-V1300. Is there anything I can to allow it to pass thru 3D video signal?


No. You'll have to connect the video to your TV and then pass the audio to the receiver. 3-D pass-thru was only added to some audio receivers with HDMI outputs in about 2010. The Yamaha RX-V1300 was released at least 7 years earlier. Video monitors/TVs with 3D display were virtually unknown when this model was released. You can find the specifications for this receiver here: http://usa.yamaha.com/products/audio-visual/hifi-components/stereo-receivers/rx-v1300_black__u/ (click on the Specs tab).

I wish that I had better news for you.

Cindy Wells

Dec 01, 2014 | Yamaha RX-V1900 Receiver

1 Answer

Remote doesn't work


I JUST BOUGHT A YAHAMA RX-V575 BL RECEIVER.CAN YOU ADVISE HOW I CAN GET A MANUAL FOR IT?.

Nov 03, 2013 | Yamaha RX-V575

1 Answer

How do I reset a yamaha rx-v493 receiver?


Disconnect any speakers from it and see if it still turns off. If it doesn't, then you have a shorted speaker or speaker wire. If it does still turn off, then it would need to go in for repairs.

Jan 09, 2013 | Yamaha RX-V493 Receiver

1 Answer

RX-V461 Yahama Receiver is hooked up to TV with optical THX cable but can't get sound. Tuner on receiver plays and all speakers work perfectly for radio listening.


double check input used on amp and make sure u use the auto format decoder fuction on your amp ok if it has none than turn it on optical digital ok that should work for you :)

Feb 10, 2011 | Yamaha RX-V461 AV Receiver

4 Answers

Doesn't power up


Hallo,my name is Peppe and I am an italian technician (Naples). My english language is not perfect but I try to explain how repair the receiver because the mine have the same problem (don't power on after 4 years of regular use ).
The bad component is the capacitor C405 (22nf 630 v )on the relay power board,the same board where are the two socket for the ac outlet.
I hope that my solution help all the persons wich have this problem on this very beatiful amplifier Yamaha RX-V450.

Nov 18, 2007 | Yamaha RX-V450 Receiver

1 Answer

Immediate shut


Unplug all the speaker wires first, then unplug the unit from the wall for at least 24 hours, The plug back in without the speaker wires or anything else plugged in. Then see if it goes to the protection mode. If it does not, plug in each speaker at a time, and see if any speaker, when hooked up, makes the receiver shut down. If it does shut down, My friend, I'm afraid you will need to take this unit into a repair shop, OR get a new unit. Good Luck

Jun 06, 2007 | Yamaha RX-V630 Receiver

1 Answer

Yamaha Receiver RX-V630 not working (resets itself immediately)


This maybe an easy one. Have you unhooked all the wires going in to the stereo. "SP wires" means you have wires to the speakers are touching and the stereo is shutting down to avoid overloading. Hope this helps...

Jun 05, 2007 | Yamaha RX-V630 Receiver

4 Answers

Yamaha RX-V2400


Get another receiver! I had the same problem and had the power supply replaced $250 and after 3 months it started doing the same thing.  I just purchased a Pinoeer Elite VSX 90TXV.

Jun 04, 2007 | Yamaha RX-V2600 Receiver

Not finding what you are looking for?
Yamaha RX-V630 Receiver Logo

Related Topics:

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5515 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75767 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...