Question about Technics SA-TX30 Receiver

1 Answer

Lp player i have a lp player and i have connected it to almost every source on the receiver but the sound is very flat there aint very much bass

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 948 Answers

You need a pre-amp. I use this one - http://www.mcmelectronics.com/product/40-630
Connect the RCA output to your soundcard's input using a cable with RCA jacks on one end and a 1/8" stereo connector on the other.

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer Pl990 turntable sounds awful.... I have a pioneer pl 990 record player connected to a pioneer amplifier and a sony CD player. when I play an LP, the sound is bass heavy and I can hardly hear t


When the turntable plays, do you get a howling bass heavy sound? Have you tried turning down the volume and bass? If that corrects the problem, you have what's known as Acoustic Feedback. Check to make sure the tonearm is properly set up first. If it is, please visit my website at Audioserviceclinic.com. You may contact me there. Thank you.

Dec 13, 2014 | Pioneer PL-990 Turntable

1 Answer

Can't get balance, bass and treble to work when connecting Bose Acoustimass 5II to HK AVR 525


On my yamaha 375 receiver if I connect digital or hdmi it disables the balance/bass treble etc but they work with anolog don't know if yours might be the same just abit strang if anolog doing it aswell

Jan 15, 2014 | Harmon Kardon Harman Kardon Avr 525 7.1...

1 Answer

My powered subwoofer no longer works through the receiver


if you have your front and centers set to 'small' you want your Bass out to be subwoofer only, and the rca jack labeled 'sub out' is the only place to connect your sub to if you want to control the frequencies with your reciever. I dont know the brand of your sub, or the inputs on the back of it to advise you where to connect, but it sounds like it worked for you at one time, but suddenly it does not

Mar 05, 2013 | Audio Players & Recorders

1 Answer

I can't get any real bass out of this unit. Iv'e gone thru the manual 20 times and I set the "DZE" off, then adjust the bass to max and it made a little difference. But this unit is suposed to...


Hi,
Try to exchange one speaker connections only, unplug connector from speaker and put them + to - and - to + pins.
In my opinion, both speakers are giving out of phase sound that cancels the bass sound, speaker connections should be same phase to get bass sound so just change connecting two wires at any one speaker, that will work.
Thanks.

Nov 26, 2010 | Clarion DXZ785USB Car CD/ MP3 Player

1 Answer

It comes on but no base sound and wont turn up


You have to fill in the details about what you're feeding it (the source and how IT's set up). It won't just >>create<< bass.

From the manual:

If you used the high-level (speaker) inputs and there
is no sound from any of the speakers:
• Check that receiver/amplifier is on and a source is playing.
• Check that powered subwoofer is plugged into an active electrical outlet and is switched on.
• Check all wires and connections between
receiver/amplifier and speakers. Make sure all wires
are connected. Make sure none of the speaker wires are
frayed, cut or punctured.
• Review proper operation of your receiver/amplifier.

If there is low (or no) bass output:
• Make sure the connections to the left and right “Speaker
Inputs” have the correct polarity (+ and –).
• Make sure that the subwoofer is plugged into an active electrical outlet and switched on.
• Adjust the crossover point.
• Flip the Phase Control switch to the opposite position.
• If you are using a Dolby Digital/DTS receiver or processor, make sure that the subwoofer adjustments on the receiver/processor are set up correctly.
• Slowly turn the Level Control clockwise until you begin to hear the desired amount of bass.

If you used the line-level inputs and there is no sound
from the subwoofer:
• Check that receiver/amplifier is on and a source is playing.
• Check that powered subwoofer is plugged into an active electrical outlet and is switched on.
• Check all wires and connections between receiver/amplifier and subwoofer. Make sure all wires are connected. Make sure none
of the wires are frayed, cut or punctured.
• Review proper operation of your receiver/amplifier.
• Slowly turn the Level Control clockwise until you begin to hear the desired amount of bass.
• Make sure that you have configured your receiver/processor so that the subwoofer/LFE output is on.

Apr 07, 2010 | JBL PB12 Subwoofer

1 Answer

My bass plays on my subs,but the words dont play throughout my car,i have an amp pushing my mids and highs,and the rca jacks are running to the front side on the back of the unit,whats the problem.I...


The amps frequency setting is on LP (low pass) only playing bass so you have to put it on FR( Full Range) all frequency's and you'll get your sound back.

Apr 05, 2010 | Jensen VM9410 Car DVD Player

1 Answer

I get no sound when connected to CD connection


if there is no phono input,you need a pre amp to drive it.the record player puts out 5 mv from the cartridge.
a cd player is 800 mv to one volt output.
the turntable can not drive the cd input.
a phono pre amp also has a 60db gain from 20hz to 1khz to offset the -60 db curve when records are made to reduce the groove modulation.
without the bass attenuation,record grooves would have to swing 4" for bass notes.
google RIAA equalization curve for a description.

Sep 01, 2009 | Yamaha HTR-5830 Receiver

1 Answer

Input LP's to my computer & play thru X-Fi sound card


Digitizing sound does not improve its quality. If your LP's sound like they do when you just play them through a stereo then the sound card is doing its job, which is to reproduce audio. If you want to change the way it sounds look into software to buy to do so. But simply running it throuch a analog to digital converter will not make it sound better when your source is an LP

Dec 06, 2008 | Acer Aspire™ T180 PC Desktop

1 Answer

Bass sounds only


That is tricky one. Did you try adjusting the EQ on both the stereo and the amp? Is the Mute turned on because it will act like that? Is both rca jacks plugged in on stereo and amp?

Aug 20, 2008 | Alpine CDA-9856 CD Player

1 Answer

No bass thru cd player


it seems like you connected the wrong remote wire to the amp.
Alpine has two remote wires.
BLUE (only) This is the pwr antenna remote wire,every time you insert a cd this remote wire,the pwr cut out.
BLUE/WHITE STRIPE This is the AMP REMOTE WIRE,THIS IS THE REMOTE WIRE THAT YOU NEED TO CONNECT TO THE AMP
LET ME KNOW IF IT WORKS
thank's

Dec 25, 2007 | Alpine CDA-9807 CD Player

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Technics Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4872 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Technics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...