Question about Kettler Sport & Outdoor - Others
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is a common problem for the CTR1, it actually sounds a lot worse than it is. It's just one of the 4 bolts that hold the front "pole" of the CTR1 in place that is broken. You will need to unscrew the bolts at the base (just move the plastic piece that hides the bolts up on the "pole"). After removing the pole you will need to remove the broken bolt from the inside of the "pole" with plyers. Then just put the pole back in the base, replace the screws (be sure to tighten them good). All will be good :)
This is a weak point of the CTR1, be prepared to run into the same problem again down the road...
Posted on Jan 16, 2011
SOURCE: how to access batter on
If you look behind the unit, (directly behind the digital readout) you'll see a small rectangular inset, if you look up in that (I used my cell phone light), you'll see a tab that you can pry with a screwdriver gently to release the computer section. Just keep one hand on top, when you pry it you'll feel the unit pop up, then you can lift it out. It takes 2 AA batteries, thankfully not some bizarre disk batteries :)
Btw when you look at the readout, you'll notice it's set in a silver square- that square is the computer module that pops out.
Hope this helps!
Posted on Feb 21, 2011
SOURCE: My power pack & cable(
Contact Kettler as per the following instructions from their website: https://www.kettlerusa.com/parts. Your product is still available on the Canadian site so you should be able to order parts.
KETTLER'S Parts and Service Staff are available Monday thru Friday from 9:00 a.m. to 4:30 p.m. EST.
Requests can be submitted by phone to 866.804.0440, fax to 757.563.9273 or e-mail to email@example.com.
Model number of your product, your name, phone number or e-mail address is extremely important in order to process your order on time. Regular orders should be completed within 4-5 business days of order receipt. Special orders (parts required to be shipped from manufacturer in Germany) should be completed within 30 - 90 days. Our phone system is equipped to process messages in the order they were received.
Please only submit your request once by phone, fax or e-mail. Each of our KETTLER Parts and Service staff will provide you with accuracy, excellence and friendly professionalism. Please note we are only able to service US and CANADIAN customers.
To look up the part numbers for the items you require and for future reference your manual is available here:
Posted on Jun 25, 2011
Tips for a great answer:
Dec 28, 2015 | Precor 546 Elliptical
Feb 24, 2015 | Kettler Verso 309 Elliptical Cross Trainer
Oct 28, 2014 | Exercise & Fitness
May 07, 2014 | Life Fitness Remanufactured 95Xi...
Dec 31, 2012 | Kettler Verso 307 Recumbent Bike
230 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: