Question about ASUS Computers & Internet

1 Answer

Webcam doesnt come up

It brings up an icon in lower right screen toolbar,but nothing happens when i click it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

1.You may try reseting your pc always try whats easier (Sometimes restarting puts things into place)
2. Start >>>then TYPE >> DEVICE MANAGER hit enter look for the driver then UPDATED IT its easy but you have to read it may be listed under vision... so once you find it (R) click on it
3. Try UNINSTALLING and Re Installing : )

Posted on Nov 27, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 95 Answers

SOURCE: Turn back on the double click on touchpad of laptop

go to device settings, properties, tapping, then check the box.

Posted on Feb 12, 2009

frankzcomput
  • 268 Answers

SOURCE: my eee pc boots up with only a blue screen and the tool bar!!

You need to restore the OS. Please see about getting the operating discs from the manufacture



Thanks, Frank
@Tech
http://www.attechcomputers.co.cc
3868607368.

Posted on Jun 19, 2009

aroostookb
  • 98 Answers

SOURCE: cant open network center, cant connect to wireless

Do a restore to a previously good state.........

Posted on Jun 23, 2009

JAN_yuanjia
  • 470 Answers

SOURCE: webcam wont start

find the .exe because that is the installer

Posted on Jun 26, 2009

ErusTownsend
  • 592 Answers

SOURCE: Acer crystal eye webcam doesnt work.

ok this problem is caused by the wrong drive installed for the Crystal Eye Web cam.

even thoguh the camera shows that it is installed, the application looks for a specific one for the model you have. Unfortunatly Acer used 3 models of the camera without telling you which you have and calls all of them "crystal eye web cam"

go to acer.com select their support section and download all driver and applications available for the camera. you will need to try then 1 at a time til you get the one that works for your system

Posted on Feb 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I installed my c200 webcam and when i click on an web cam icon or the video icon i get a scree that say i need to click on to logitech vedio hd up grade and when i do nothing happens so check for the...


If you are trying to upload the software from a CD try downloading the installation wizard from the website.
Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to check the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click 'Start', click 'Run', type dxdiag in the Open box, and then click OK
Run through the tabs checking the 'notes' windows for information
The version will be shown on the 'Systems' tab

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

Sep 22, 2010 | Logitech WEBCAM C200

1 Answer

Is there any way to adjust the mike on logitech webb cam


First of all make your webcam the default mic on your computer
Plug in webcam

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

RESTART COMPUTER ( IMPORTANT )
You can now adjust the mic by clicking on the speaker icon down in the notification area ( by the clock )
If its not there - right click on the lower task bar ( a blank area) and select 'Properties' click 'Notification area) and check the box for 'volume' > Apply > OK

During the webcam software upload you may not have opted for the Logitech shortcut on your desktop - if so > Start > All Programs - locate the logitech folder and expand it - right click on the logitech software ( with the webcam icon) and select ' Send to - Desktop create shortcut'

Plug in your webcam
Launch the webcam dashboard (toolbar) by double-clicking the shortcut icon and open the 'Settings' menu ( 2 gearwheels)
Select the mic icon to make any changes

Jul 26, 2010 | Logitech Computers & Internet

1 Answer

My computer will not bring up the webcam so i can record videos. I go to control panel -> scanners and cameras -> then i double click on the Logitech quickcam Express and it says its a digital camera...


When you downloaded the logitech software you had the option to have a desktop icon for the webcam toolbar
If you did not take up this option you will have to create a toolbar shortcut from "All Programs"
Scan the programs to find Logitech and click on the folder to open it.
Look for "Logitech webcam software" with a webcam icon in front.
Right click > Send to > Desktop - create shortcut

Launch the toolbar and click on the "Quick Capture" menu ( 2 film frames picture with a head and shoulders on one frame)
Your snapshots and videos can be recorded from here

Jul 02, 2010 | Logitech QuickCam Express Web Camera

1 Answer

I have a Logitech C500 webvcam. I cannot get the software to completely load from the cd. It is brand new! I can get the video, but cannot get the mic on the cam to work!


Launch the Logitech toolbar by double clicking the shortcut icon on your desktop
Open the settings menu by clicking the 2 gear wheel picture
Open audio menu and check all settings.
Close toolbar

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer and configure to your chat program

If the software is suspect, download from the logitech webside
http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405
Identify your cam from the picture gallery and click on it to navigate to the support page for your model


Feb 12, 2010 | Logitech Webcam

1 Answer

Microsoft vx 1000 i cant get the audio to work on a vista computer


Typical audio set up

Laptop with mic x webcam with mic x Vista x Yahoo Messenger 10

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device - enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Video and Voice
Set webcam mic and speakers to show Default equipment
Open Video and Voice Setup to test audio equipment
Click 'Place a free test call'
Check box 'Allow USB devices to access Messenger'
Click 'Apply' click 'OK'

Jan 30, 2010 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Pc webcam ywb-1016, video works, but audio(built-in mic) doesnt


You may have to tell your computer what mic you wish to use ( make it default )
Typical audio set up

Laptop/mic x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Jan 19, 2010 | GE EasyCam Webcam

1 Answer

How to work mic nothing is muted but its still not working


Typical audio set up

Laptop x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Jan 01, 2010 | GE MiniCam Pro HO98756 Webcam

1 Answer

Cant get the microphone to work


Without knowing your OS or computer setup I can only give an example for a general example and hope it puts you on the right track.
Example
Laptop x webcam/mic x Vista x Yahoo Messenger
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Nov 16, 2009 | Microsoft LifeCam VX-1000 Webcam

1 Answer

I install a gear head web cam but the other person cannot hear me


You do not say what your OS is, if your computer is laptop or desktop or what program you want to chat in

Set up Audio

Laptop x webcam/mic x Vista x Yahoo Messenger

If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays
Restart computer
CONFIGURE TO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Calling and Audio
Set mic and speakers to show Default equipment
Run call up assistant to test audio equipment > Apply > OK

Other chat programs are less intensive for audio set up - Skype and MSN can be navigated via the 'Tools' option on the toolbar.


Oct 18, 2009 | Gear Head WC535I Webcam

3 Answers

Can't turn volume down!


Go into your sound devices from the control panel. You should be able to raise & lower the volume from there as well as putting the volume icon back into your system tray. Hope this helps.

Jul 08, 2009 | Compaq Armada E500 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

778 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...