Mx700 keyboard/Mouse - Mouse doesn't work

Insert your operating system disc in to your cd/dvd rom drive, then go to my computer properties, now go to device manager and right click on keyboard or mouse what you want, now re-install your device from your cd/dvd rom, and restart your system.

Try changing the batteries, then press the connect button on the receiver, then press the connect button on the mouse to pickup the signal from the receiver.

Check your keyboard is working or not by accessing your BIOS by pressing del or Esc or F12 (usually) or whatever your boot up screen says. If your keyboard works there then the problem lies in the operating system.If still your keyboard doesn't respond then replace the keyboard.

only if keyboard work, you can fix mouse opearting system problems.

For windows Vista & 7, expand "Mice & other point devices".right click on Microsoft Ps/2 mouse" select uninstall and restart the system.If your mouse is still working the system will automatically installed the mouse driver.And your mouse will work again.

Otherwise get a new mouse.

Note: Check you have wrongly insert the mouse 7 keyboard port at the back too.

Remember : Green for Mouse
                   Purple blue for keyboard

I'm sorry for the demise of ur mouse, I pay my solemn respects to it.
I kindly ask u to burry it in ur backyard

Yes, you can. Bur you need to insert the dongle to USB port which is came along with the Keyboard. Also install the driver for the same.

Check the batteries on mouse and keyboard.
Good Luck.

Un plug your mouse plug from your computer. next push the buton on your remote control, And push the mouse buton then the keyboard. it will work. if it does not work push the keyboard first then the mouse. it works for me . hope it does for you. ty saw

please go on control and look mouse setting and correct it. and also look battery of mouse, if not work there is hardwere fault. (nepal)

You probably already done this but try pressing the receiver button and while it is flashing turn the board over and press the small reset/connect button on the bottom of the board and also the reset/connect button on the bottom of the mouse. It should work okay after that. here is hoping that helps. Bud

-Refurbs usually come barebone, on any refurb product, definately read the terms and agreements of the warranty... No way in $*%# would I take a refurb without SOME sort of defective warranty.

-Try another computer -If it don't work on yours, try it on another one. Ensure its not lose, so wiggle it a little, and if it lights up to charge for a second, there's something interfering with the connection from the mouse to the dock. If all else fails, call the seller, cus it is, a refurb.

-Manuals are downloadable from the manufacturers website. Its a common trend that the manuals are links somewhere around the driver webpage, but a big company like logitech, shouldnt be hard to navigate.