Question about Buffalo Technology (WYR-G54) Router

1 Answer

I reset my router, and now I cannot connect to it with it's http://192.168.11.1/index.htm address. Is there a step I didn't have to do before, or is it possibly broken?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

Make sure that router configuration switch is in AUTO position AND your PC is connected to LAN port.
Power cycle both, computer and router.
192.168.11.1 is default address and should be accessible after.

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

D-Link DSL2730U dead after firmware update


Did you do a Hard reset of the Router after the Firmware Update? Try a 30/30/30 reset procedure: http://compnetworking.about.com/b/2009/03/11/the-30-30-30-hard-reset-rule-for-routers.htm Then reconfigure the SSID and the Security Key. AFTER, Shutdown the Laptop remove battery, plug in, reboot. post results.

May 08, 2013 | D-Link Computers & Internet

6 Answers

Can't connect to my edimax ar-7284wna router


theres a temporary solution... reset router and change the date on your computer to 1 febrauary 2010 and you will be able to login. you can set all your details and even if you change your date back to current it will not affect your settings however to log back into the router you need to set back your date to feb 2010..

Hope this works.

May 30, 2012 | Edimax Computers & Internet

2 Answers

I have a Belkin F7D1401 wireless modem router and every 2 mins I am unable to access the website, I have to referesh the page 5-10 times then the website appears otherwise it says Connected to hotmail


Try a firmware upgrade:
http://en-au-support.belkin.com/app/answers/detail/a_id/4618/~/f7d1401au-basic-wireless-modem-router---firmware-update

good luck,
Majdi

Dec 27, 2011 | Belkin Basic Wireless Router

2 Answers

Need password to my cisco wireless router


For that press RESET button of your router for 10 seconds then it will automatic restart and reset. then connect router to computer lan port with lan cable. then you can access it with default ip addresshttp;//192.168.1.1 or http://192.168.1.2 Type user as 'admin" and password as "admin" or "1234" or "password" or blank then you can see configuration page of router. Then click on wireless->security then note down the password.It's your password to connect wireless.
Let me know if you need further assistance. thanks for using fixYa.

Oct 17, 2011 | Cisco Linksys E1000 WirelessN Broadband...

2 Answers

Not able to reload Router back onto system, after several attempts


The router does not need to be loaded onto the system. What is the exact problem you are having?

Mar 05, 2011 | Dell TrueMobile 2300 Wireless Broadband...

1 Answer

I keep losing my wireless connection and i have to boot the router


1.Update the routers Firmware to update copy and paste this website to your browser address bar then hit enter. http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G
Under Firmware click download and run the program not save this will update your router firmware.
2.Powercycle equipment (Unplug power wait 15 seconds then plug back in)
3.If connection keeps disconnecting reset your router to default settings to do that press and hold the reset button located on the back of the router this will reset the router to default settings, You will want to secure your router once again to do that copy and paste the address into address bar of your browser this will show you step by step how to secure your router.
http://vectrosecurity.com/content/view/49/26/

Feb 17, 2011 | Linksys Wireless-G WRT54G Router

2 Answers

I can not browse: http//192.168.10.1


Most routers have a default address on a local network of 192.168.1.1. Try connecting to that first.

Sep 21, 2010 | Trendware TRENDnet TEW-432BRP Cable/DSL...

1 Answer

I have a new modem from comcast and now my router will not connect to the internet. i have reset the router and even connected directly to the router to see if i can get internet and still can not get...


To restore the router to factory default settings, please do the following:
1. Unplug the router's power supply
2. Press and hold the reset button on the bottom of the router
3. Keep the reset button depressed and, at the same time, plug the power supply back in
4. Keep the reset button depressed for another 10 seconds
5. Release the reset button
======================= Manually configuration ==============================
ISP Cable or Dynamic
Step 1 : Connect modem - Router - Computer ( Wired )
Step 2 : Open router setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left side under internet WAN click Connection Type
Step 4 : leave the Password Blank and click submit
Step 5 : Choose the connection type as dynamic and click next
Step 6 : Leave the Host name blank and click apply
Step 7 : On the left Under Internet WAN Click MAC Address
Step 8 : Click Clone and Click Apply changes
Step 9: ISP DSL

Note: If your connection is DSL choose the connection type as PPOE
and set your User name and Password( ask yous ISP provider

Step 10 : Then check if you have internet
Step 11 : if not Then unplug the Power Cable from the Modem And the Router
Step 12 : Plug the power Cord to the Modem
Step 13 : Wait till all the lights are on
Step 14 : Plug the power to the belkin
Step 15 : Check the color of the light in the belkin
Step 16 :If green then Check if you have internet
If not working then call belkin
========= WIRELESS SETTING UP A WIRELESS CONNECTION ====================
Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works

May 27, 2010 | Belkin Wireless Pre-N (F5D8230-4) Router...

1 Answer

Password not working


1. Reset the router.

a. Please push the reset button at the back of the router and release after 30 seconds.
b. Unplug the power adapter for 10 seconds and then plug it back in.

Try other browsers like Internet Explorer, Mozilla Firefox, Netscape, etc.

If you still cannot access the routers page, try another computer and connect it on your router. Then repeat the steps.

2. Access the web-based utility of the router.

a. Open any web browser like Internet Explorer or Netscape Navigator.
b. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
c. For security reasons, the router has its own user name and password. When prompted, enter admin for the user name and password for the password, both in lower case letters.


Jul 02, 2009 | NetGear RP614 Router

1 Answer

I connected my netgear but it does not connect


Here are some troubleshooting steps that I suggest you try:

1. Check physical connections.

a. Connect the modem to the Internet port of the router. The Internet “i” LED on the front of the router should light up.
b. Connect the computer to one of the four LAN ports (i.e port 1, 2, 3 or 4) on the back of the router. The corresponding port light where you connected the computer should be lit up.

2. Access the router's web-based utility.

a. Please open any web browser like Internet Explorer or Netscape Navigator.
b. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
c. A window will prompt for a user name and password. By default, the user name is "admin" and the password is "password".

Note: If you were unable to access the router's web-based utility, you may reset the router to restore the settings to factory default.

To reset the router:

a. Please push the reset button at the back of the router and release after 30 seconds.
b. Unplug the power adapter for 10 seconds and then plug it back in.

3. Configure the router.

If your Internet Service Provider is using a cable connection, please follow the steps below:

a. Click on Basic Settings under Setup tab.
b. Select No for Does Your Internet Connection Require A Login?.
c. Scroll down on the center page and look for the Router MAC Address section. Set it to Use computer MAC address and click on the Apply button.

If your Internet Service Provider is using a DSL connection, please follow the steps below:

a. Click on Basic Settings.
b. Select Yes for Does Your Internet Connection Require A Login?.
c. Select Other on the Internet Service Provider drop down box.
d. Enter your ISP's username (username@ISPdomain) and password. Then, click on Apply.


4. Power cycle.

a. Power off the modem, router and computers.
b. Turn on the power of the modem first and wait for it to initialize, the lights to stop blinking.
c. Power back the router and the computers. Check if it will be able to get online.

From the above configuration, please check if you can now access the Internet.

Jul 05, 2008 | NetGear RP614 Router

Not finding what you are looking for?
Buffalo Technology (WYR-G54) Router Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buffalo Technology Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Prashant M
Prashant M

Level 3 Expert

2259 Answers

hellics

Level 1 Expert

45 Answers

Are you a Buffalo Technology Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...