Question about Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

No Power!!! I have just had my Beko WM5120 delivered. We have plumbed it in and plugged it in but when the plug is switched on there is no power coming through. Any ideas??? Beko aren't open until Monday and i'm really stuck as to what to do!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 123 Answers

Hi there......have you checked that your getting power at the socket where you have plugged in the washing machine...if its hard wired recheck the wiring........have you switched the apliance on....

regards Sir Galahad 07739911549

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The reset button is not on the back of my beko condenser

hi the heater cover needs removed from rear of machine there you will find the stats on top of heater there should be a rest on 1 of them please make sure it is switched off at power source and unplugged before you start

Nov 26, 2015 | Beko Washing Machines

1 Answer

Water will not drain from Beko washing machine, (no power).

If there is no power it seems that the power supply to the control board has failed or the control board itself has failed. You need to trace the voltage to confirm before proceeding further.

It is possible that the machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve to open up and allow each function to be driven starting from the flow of water into the drum as also the drain valve to open to exit the water at the point of the program cycle. If this does not happen then the voltage at the valve/motor/pump must be checked or the fault relates to no voltage from the controller. This means the controller is a suspect.

Mar 08, 2013 | Washing Machines

1 Answer

No power

Possible that the power supply has failed within the main controller panel unit. You can remove the unit to check on the fuse and surge capacitor., if there is supply to the panel and the processor does not work then the panel must be replaced.
Click for tips to remove.: Control panel

Jan 24, 2013 | Beko Washing Machines

1 Answer

How to connect a beko washing machineplumb in to pipes

You need to connect the drain hose to the outlet , connect the inlet water line to the inlet of the machine and then the power to the machine from a three pin power socket.
Please check this link: Washing machine

Jul 04, 2012 | Beko Washing Machines

1 Answer

My beko washing machine (wm5120) has stopped taking the fabric conditioner.

beko washing machine (wm5120) has stopped taking the fabric conditioner This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Sep 02, 2011 | Washing Machines

1 Answer

Beko power even with new fuse

  1. Close the lid or door. Washing machines automatically stop when the lid or door is open. Lift the clothing and move it slightly. If the washing machine is overloaded with towels or heavy garments, it might become unbalanced. The washer won't run until the items are adjusted.
  2. High-efficiency machines might stop running when regular detergent is used or too much high-efficiency laundry soap is poured in. If you suspect that the laundry soap is the problem, cancel the cycle and press the "Spin" or "Drain" cycles. Restart the cycle, but do not add more detergent.
  3. Inspect the water outlets. Turn faucets to the left to ensure that both the hot and cold water hoses are open. Tug on the hoses to make sure they are attached and inspect the hoses for thin spots that might be causing leaks. Make sure the hoses aren't kinked. Detach the hoses and run clean water through them to remove clogs.
  4. Is the washer's cord plugged into a grounded outlet? Never use extension cords to power washing machines. Check the circuit box for blown fuses.

Feb 02, 2011 | Washing Machines

1 Answer

Washing machine flips the fuse box switch

Either the moter is jambed or timer is broken Disconnect power tip machine up and attempt to move belt manuallr it shouls with some resistance

Oct 12, 2009 | Washing Machines

1 Answer

Indesit WIXXL146 washing machine will not turn on

sounds like interlock or pcb try lock first as this is cheap to replace regards jason

May 08, 2008 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides