Question about ATI Amd Amd Phenom II X4 965 Black Ed. - Hdz965fbgmbox

1 Answer

Will hdz965fbgmbox processor work with ami po1-ao mobo

Is it comatable with ami po1-ao motherboard

Posted by on

  • ralph gordon Nov 27, 2012

    emachines mcp61pg-gm according to belarc advisor

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,660 Answers

AMI is American Megatrends Inc.

A BIOS program company. (Basic Input/Output System)

AMI po1-ao is one of AMI's BIOS programs.

Used on a LOT of desktop computers, and consequently several different motherboards.

How about the motherboard manufacturer, and model number; or computer manufacturer, and model number? Model number is on the back of the computer next to the Windows product key; or up on the side of the computer tower.

Post back in a Comment.
Regards,
joecoolvette

Posted on Nov 27, 2012

  • joecoolvette
    joecoolvette Nov 28, 2012

    Going with I think you meant to state MCP61PM-GM, (It's made by ECS. Elitegroup Computer Systems)http://support.gateway.com/s/MOTHERBD/Sh... "Supports AMD - AM2 Socket - K8; Athlon 64 X2; Athlon 64; Athlon FX; and Sempron processors, under 89 watt power consumption." The AMD Phenom II X4 965 Black Edition, requires a Socket AM2+, or Socket AM3.http://en.wikipedia.org/wiki/Socket_AM2%... Phenom II X4 965 Black Edition is Deneb Core. "Four AMD K10 cores" ->http://en.wikipedia.org/wiki/AMD_Phenom_... In My Humble Opinion -> No. Will not work. Regards, joecoolvette

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want a motherboard jumper setting table


You'll need to open the case on your PC; locate the manufacturer name and model number of the motherboard and then use an online search engine by typing in <motherboard> (without the arrows) with the model number. You should be able to find a manual from third party sources or by going to the manufacturer's website to see if the manual is archived.

You can locate the MOBO information at either one of these locations:
  • RAM slots
  • CPU socket
  • or between the PCI slots
MOBO model numbers are usually a collection of numbers and letters between 5 and 7 digits long.

If you have a problem located the model number and manufacturer:

Run the utility; depending on the speed of your processor, it could take seconds or about a minute to pull up the info. <Click> on the mainboard tab, it'll list the manufacturer's name and model number of the MOBO.

A third way to locate MOBO information, Open the <RUN> dialog box from the start menu or by pressing the windows icon key and the letter R simultaneously.

Type <MSinfo32> (without the arrows) and press <enter>

The BIOS ID will be displayed- sometimes manufacturer info and model number will be displayed.

If not, you will be able to determine the BIOS as being either AWARD or AMI (American Megatrends, Inc.); and from there, be able to decode the ID number to a specific manufacturer.

  • AWARD: first five digits indicate the chipset & the following two digits identifies the manufacturer; you'll have to go online and search who that two digit manufacturer is.
  • AMI: the MOBO manufacturer is Identified by the last four digits in the third group of numbers.

Mar 04, 2015 | Acer Veriton M480G-EQ8400C Core 2 Quad...

4 Answers

Five long beeps at a range of five seconds then, repeats


Five long beeps for a modern motherboards indicates a processor failure. If you wish to remove the processor and re-seat it (reconnect it to see if it begins to work again) make sure to get some thermal compound to put between the CPU chip and the heatsink. More info at: http://www.hardwaresecrets.com/article/How-To-Correctly-Apply-Thermal-Grease/274
POST AMI BIOS beep codes
  • 1 - Memory refresh timer error
  • 2 - Parity error in base memory (first 64 KiB block)
  • 3 - Base memory read/write test error
  • 4 - Mother board timer not operational (check all PSU to MB connectors seated)
  • 5 - Processor failure
  • 6 - 8042 Gate A20 test error (cannot switch to protected mode)
  • 7 - General exception error (processor exception interrupt error)
  • 8 - Display memory error (system video adapter)
  • 9 - AMI BIOS ROM checksum error
  • 10 - CMOS shutdown register read/write error
  • 11 - Cache memory test failed
  • 12 - Mother board does not detect a RAM module (continuous beeping)
Source: Wikipedia

Feb 28, 2011 | Computers & Internet

1 Answer

A7V400-MX Motherboard: I have changed the processor on my mobo, and I wan...


Based on the user manual starting v.2 dated April 2004, this mobo uses a dip switch array to set your processor and bus speed.
You will need to set the correct processor speed based on manufacturer [AMD] description.
Visit this link and see page 23 to set the switches as needed for your new processor.

May 18, 2010 | ASUS A7V400-MX Motherboard

1 Answer

What is the fastest CPU I can run on an Abit KN8 SLI socket 939?


Your mobo rans in Athlon 64 socket 939 compatable processor. The fastest processor there is that you can install in this mobo is AMD Athlon64 4000+ Socket 939 Processor. =)

Apr 30, 2010 | Abit KN8 SLi Motherboard

1 Answer

Upgrading the p4m900T-M2 mobo from P4 3.2Mhz to E8200 2.66Mhz


hello u must have the processor for your motherboard to work I mean the one that has been working .

with that smell of burning means the processor ur trying to ugrape was not suited for the board so pray that the motherboard is ok

have fune

bye

Sep 12, 2009 | EliteGroup P4M800PRO-M Motherboard

1 Answer

Looking for a compatible processor for this mobo


It is impossible to fry a motherboard by using the wrong processor, the board simply won't post. You can use a chart at the ECS website, your motherboard is a Socket A type. Looks like the fastest processor that they have tested is a Athlon XP 3000+.

Apr 04, 2009 | EliteGroup 741GX-M Motherboard

1 Answer

Computer won't turn on.


This sounds like an overheat problem, is your cooling fan working properly, also the processor you are using is a powerful one, so needs a cooling fan much more powerful than the lesser powered athlon 64 processors.

Dec 02, 2008 | ASUS CROSSHAIR Motherboard

Not finding what you are looking for?
ATI Amd Amd Phenom II X4 965 Black Ed. - Hdz965fbgmbox Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top ATI Computers & Internet Experts

David
David

Level 3 Expert

781 Answers

Computer Links

Level 3 Expert

2386 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you an ATI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...