Question about Toshiba E-STUDIO 650 Copier

Open Question

Toshiba studio 550 c37 - Toshiba E-STUDIO 650 Copier

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

didi2005
  • 524 Answers

SOURCE: How to determine what error codes for failure on Toshiba E-studio

Press "Clear+8" and u will see the error code.

Posted on Mar 02, 2009

didi2005
  • 524 Answers

SOURCE: my toshiba e-studio 550: service recommended for SPC appeared

Check the control status of the surface potential sensor (05-242).
<When “4” is displayed: sensor error>
The sensor detection value is abnormal or the sensor output value is not changed even though
the main charger bias value is changed.

Is the connector of the surface potential sensor connected properly?

Is the main charger grid/wire attached poorly?
Is the main charger attached poorly?
Are leaks and such occurring?

Posted on Mar 06, 2009

Copier_God
  • 57 Answers

SOURCE: toshiba e-studio 550 call for service F10

Do the following.
Hold down 0+8 and turn the copier on.
Type in 690 then hit start.
Make sure there is the number 2 displayed.
Press enter on the touch screen.
Reboot the machine when told to.

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error c37 toshiba


Hi Ahmed - I'm not much of a copier tech any more, but I'm pretty good at looking things up.. :)

According to the link I found for you, it indicates a problem with the transfer belt cam motor. One contributor on another site wrote, "I don't have service manual. However you may try this; Press and hold 0 and 3 while turning on the power. Enter code 114. This will make the Transfer belt motor run. Press Clear/Stop to end the test." The page with error codes was found here: http://officeimagingsystems.com/id175.html - your machine is about 2/3 down the page. Another contributor recommended that you, " Examine the transfer Belt to check and clean it,contacts,wires etc.
Use a multimeter to check if belt motor is working or not.
If it works,it means you can have problems with wires,conntacts and LGC board." Other people pointed out it could be failure of the cam motor itself. I hope one of these bits of information leads you to a solution.

Finally, if you don't have a service manual for it, I found one you can download for free at http://www.feedroller.com/Store/Service%20Manual/SERVICE_MANUAL.PDF Best wishes -

Mark

Jun 15, 2014 | Toshiba E-studio 550 Copier W/net Print

1 Answer

C41 Error on Toshiba E-Studio 550


Get a decent piece of equipment. WHY would you throw money away on a bad copier?

Apr 15, 2014 | Toshiba E-studio 550 Copier - Fast,...

3 Answers

Toshiba e-studio 550 call for service F10


Do the following.
Hold down 0+8 and turn the copier on.
Type in 690 then hit start.
Make sure there is the number 2 displayed.
Press enter on the touch screen.
Reboot the machine when told to.

Jul 22, 2009 | Toshiba E-STUDIO 650 Copier

1 Answer

My toshiba e-studio 550: service recommended for SPC appeared


Check the control status of the surface potential sensor (05-242).
<When “4” is displayed: sensor error>
The sensor detection value is abnormal or the sensor output value is not changed even though
the main charger bias value is changed.

Is the connector of the surface potential sensor connected properly?

Is the main charger grid/wire attached poorly?
Is the main charger attached poorly?
Are leaks and such occurring?

Mar 05, 2009 | Toshiba E-STUDIO 550 Copier

1 Answer

Service code c37 appeared on my toshiba photocopier


C37 indicates Abnormal transfer belt cam motor.

U need to perform below checking:

(1) Check if the connector of the transfer belt cam motor is not disconnected.
(2) Check if the transfer belt contact/release switch is working properly.
(3) Replace the transfer belt cam motor.
(4) Replace the LGC board.

Feb 28, 2009 | Minolta CF2001 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

102 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

pkwc

Level 2 Expert

254 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...