Phone unlock samsung a210 - Cell Phones

the default PIN for Micromax Canvas 4 A210 is

0000
4 ZEROS

Thanks

I can to see on Panel Screen ICOM IC-A210 message RX error

ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

If For puk & pin cod problem So Please
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved

To Unlock Samsung U600 from network lock use unlock code..Visit the site
Superunlockcodes.com get the code at low cost and unlock it easily.You can enter the unlock code in the Mobile using the unlocking instructions below:
Samsung U600 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Samsung U600 mobile phones. If you enter over a certain amount of wrong unlock codes on your Samsung U600 mobile phone, your phone may get hard locked and sometimes become unusable.

Method 1:

1 - Switch ON your Samsung U600 with a NOT ACCEPTED SIM Card.
2 - Samsung U600 will ask for "Password".
3 - Enter the Unlock Code.

OR (if the Samsung U600 shows "Insert Correct SIM Card")

Method 2:

1 - Switch ON your Samsung U600 with a NOT ACCEPTED SIM Card.
2 - Don't bother about what's being displayed on your Samsung U600.
3 - Compose : #0111*CODE#.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Samsung U600 is locked to.
CODE: Its the unique Unlock Code for your Samsung U600.

If method 2 does not work, you can try method 2 again but this time without any SIM card on your Samsung U600.

Each Samsung U600 mobile phone has an unique unlock code. You can buy the unique unlock code for your Samsung U600 mobile phone using the form above.

To Unlock Samsung Captivate from network lock use the Unlock code....Get the Unlock code from the site Onlinegsmunlock.com/unlock-your-phone/rs7wp2/
and Unlock it easily.

http://rapidog.com/usb-drivers-cricket-zte-a210-rapidshare.html
Hi Please try this link to download you're required driverHope this will be of help to youKind regardsMichelle

Unlock code is best to unlock SAMSUNG GALAXY S...Get the Unlock code for samsung GALAXY S from here Onlinegsmunlock.com follow the instructions below ,enter the Unlock code correctly and unlock it.

Samsung Galaxy S Unlocking Instructions Warning : Do not enter any wrong unlock codes on your Samsung Galaxy S mobile phones. If you enter over a certain amount of wrong unlock codes on your Samsung Galaxy S mobile phone, your phone may get hard locked and sometimes become unusable.
Method 1:

1 - Switch ON your Samsung Galaxy S with a NOT ACCEPTED SIM Card.
2 - Samsung Galaxy S will ask for "Password".
3 - Enter the Unlock Code.

OR (if the Samsung Galaxy S shows "Insert Correct SIM Card")

Method 2:

1 - Switch ON your Samsung Galaxy S with a NOT ACCEPTED SIM Card.
2 - Don't bother about what's being displayed on your Samsung Galaxy S.
3 - Compose : #0111*CODE#.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Samsung Galaxy S is locked to.
CODE: Its the unique Unlock Code for your Samsung Galaxy S.

If method 2 does not work, you can try method 2 again but this time without any SIM card on your Samsung Galaxy S.

Just purchase the Samsung B3410 unlock code from a SAMSUNG UNLOCK CODE provider..Their codes are accurate and safe. To unlock your phone, just type the IMEI unlock code provided by them on your phone.

1. Shut Down The laptop

2. Remove the laptop Battery ( Close the Lid , turn the laptop Up side down, search for a battery Lock tab, move it to Unlock position, You can see a Lock/Unlock mark on the Laptop cover, this will eject the battery from the slot.

3. Get a tweezers carefully pullout the memory card from the card slot, utmost care should be taken not to damage the card slot contacts

4. After taking out the card put back the battery make sure that it is in the locked position

5. Start the computer , try out the system

6. Verify the memory Card reader functionality using a proper card as per the maker guidelines

My solution is to connect the jabra audio jack to the speaker output of my receiver. Jabra need it to detect a source. If the connection to the source is cut, jabra waits around 30 seconds and if nothing happend jabra stop the transmittion. I hope that helps.