Question about Electronics - Others

2 Answers

Transcend 32gb jf v60 pen drive not working

Plz suggetion or details of repair tool

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 27,725 Answers

If now you can see your usb drive there might not be any need to do the following


Click start control panel administrative tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes


automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start


you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive


I found that you get best results by ticking one box then returning after it has finished then tick the other box


then you might have restore it to its default status


Right click on usb drive select properties you will have an array of options


Select the hardware option then select your drive properties policies

restore defaults


In XP


Right click on your drive select properties then on customize restore Default in W 7



Transcend jetflash recovery


JetFlash Online Recovery is an advanced new software tool specifically developed for Transcend JetFlash USB flash drives.


If your flash drive is not working properly, in most cases it can be repaired instantly by using the recovery tool's simple user-friendly interface.


The JetFlash Online Recovery Tool is conveniently located on the Internet, so no matter where you go, you can service your flash drive 24 hours a day, 7 days a week.

All data on your JetFlash drive will be permanently erased during the repair process.
Please backup the contents of your JetFlash before proceeding.



This software is designed to repair malfunctioning JetFlash USB flash drives.

It will not recover
any data/pictures stored on the device.


Hardware Requirements: USB Port (supports USB2.0), Internet Connection
System Requirements:


Windows XP SP2/ 2000 SP4 or later version(Administrator rights required)



Windows Vista (Administrator rights required, must turn off UAC) To turn off UAC in


Windows Vista, please go to Control Panel > User Account -> Turn User Account Control on or off > and then uncheck ''Use User Account Control to help protect your computer.'' Please remember to restart your PC for the new settings to take effect.



Windows 7 (Administrator rights required, must turn off UAC)
To turn off UAC in Windows 7, please go to
Control Panel -> User Accounts -> Change User Account Control Settings -> change to "Never notify" -> then, Please remember to restart your PC for the new settings to take effect.


Download Links



JetFlash Online Recovery (for Windows 2000 SP4/ XP SP2/ Vista /7)


JetFlash Online Recovery (Only for V15; for Windows 2000 SP4/ XP SP2/ Vista /7)


JetFlash Online Recovery (Only for JF620; for Windows 2000 SP4/ XP SP2/ Vista /7)


User Manuals for JetFlash Online Recovery



Manuals (Traditional Chinese)


Manuals (English)


If you need more help with this post a reply


Transcend have a lifetime warranty


Hope this helps.

Posted on Nov 28, 2012

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

I have been facing this problem since morning after I installed a new software for my brother for his PS3 Yellow Light Of ***** issue. Please let me know if I can do this myself?

Posted on Mar 02, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: problem in 4 GB Pen Drive of Transcend JF V10

Replace means, i have to scrap the Pen drive & buy new one, as same message is showing in all the computer.

Posted on Nov 03, 2008

  • 1 Answer

SOURCE: cann't transfer data through pen drive and cann't copy data

can not copy to pen drive& vice versa.And then can not Format.when Formating,it shown "this volume is write protected".what can I do...help me ..my cell no..9025274371...

Posted on Mar 05, 2009

AndystUK
  • 131 Answers

SOURCE: my usb(pen drive) does not working,why?

Help is at hand..

Here is the webpage for this model.

http://www.transcendusa.com/Support/DLCenter/index.asp?LangNo=0&ItemID=TS2GJFV30&axn=SRH1_RLT&DLKeyWd=v30

Please vote for me if you are satisfied.

AndystUK

Posted on Aug 31, 2009

Geekman
  • 32281 Answers

SOURCE: Transcend JetFlash V60 16 GB Pen Drive not working properly

Sometimes when a flash memory stick fails because it was not removed from the USB port properly. If the device is removed by just pulling it out of the USB port, it can cause the flash device to fail, you must click on the Safely Remove Hardware icon on the Task Bar and select the device you wish to remove and only do so when instructed to do so.
When the flash memory device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that its Healthy.

You need to format the external drive. Format the drive as primary drive and in FAT32.
Insert the external hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that its Health

Posted on Oct 05, 2009

bob_computer
  • 3153 Answers

SOURCE: Transcend 2GB jf v30 pen drive not getting detected in vista OS

One or more of the hints below will probably sort out most USB problems with most USB portable / external hard drives and OTHER devices (though not always)

A few things to check but assumes USB and Windows for other interfaces / operating systems (mac/ Linux) similar steps may be adapted to suit.

1. Ensure it is connected directly to the computer to a USB 2.0 port not a USB 1.0 port as this can have effects on performance and reliability

2. Use only the cables that came with it NOT one that fits that may have been lying around or is longer. Not all USB cables are equal even though they should be)

3. Do not connect through an external USB HUB unless that hub is USB 2.0 AND has its own power supply.

4. Use ONLY the power supply that came with it if it has an external power supply Don’t use any other unless you know it has both the same voltage and current rating e.g. 12V 500mA anything rated below that would not work properly.

5. Always use the same port for connecting your devices. Some devices do not like being switched about. If switched they may want to install software / drivers again. This can be especially true if you move a HUB to another port

6. For FLASH DRIVES you should ensure that the device is set for "quick removal" using the drive control panel properties or use the USB "Safely Remove Hardware" option. If you dont do this there is a very strong chance that any files you transfer may not be there when you plug into another computer.

7. It is possible to remove drives from the enclosures in most cases and connect directly inside a PC to fully check it.
You should also do this to cheack the drives connections are not bad inside the enclosure.

8. If none of the above steps help look at updating the drivers from the manufacturers web site in the support section.

9. If you checked and fixed anything there and still have issues then check your hardware from CONTROL PANEL / SYSTEM / HARDWARE.
Any exclamation marks by hardware need fixing before you investigate any further

10. ensure that you have set removable drives for "quick removal" or that you use the "Safly Remove Hardware" option often shown on the lower toolbar.It is possible that files my not be fully written to external devices before they are removed. This corrupts the file itself and even on occasion the drive.

SPECIAL NOTES
USB flash drives can fail for no apparent reason.
Sandisk Cruzers are especially bad for this.
USB hard drives should be treated with extreme care.
This is a real hard drive ! and knocks and bumps can quite literally kill them.
Note that if you hear a drive clicking or pinging this could be the worst thing you would hear.
Known as "The Click Of Death"
Hope this gives you the information you need

Bob
Moderator

It would be very decent of you to consider the quality of our experts answers and judge them accordingly as you pass through FixYa.

Thank you

Posted on Dec 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Dell Centrino laptop does not recognize the device: Transcend 16 GB JF V60 Pen Drive, what can I do?


Hi Anonymous,

There is a possibility that the flash drive might have failed. Try using the Flash drive on a different computer and if the same works then you may have to download drivers as suggested by Steve Butterworth.

Thanks and Regards.
Kiran Kumar.
#iworkfordell.

Jun 28, 2015 | Dell Computers & Internet

1 Answer

My Transcend JF V 30 / 256 GB Pen drive not able to format. I want the tool for format the same. I tried with HP formatting tool but unable to complete the format.


GO TO 2003 SERVER MY COMPUTER MANAGE AND DISK MANAGEMENT
RIGHT CLICK ON YOUR PEN DRIVE FORMAT NOW

TO USE HP FORMAT TOOL TO FORMAT YOUR PEN DRIVE
NOTE YOUR WINDO ARE ONLY 2003 SERER AND OTHER SERVER
ENJOY IT

May 17, 2011 | Transcend (589307) Media

2 Answers

Hi, I have two pen drive of transcend one 4 GB JF V10 , another 4 GB JF V60. These are not detected by computer.


These drives should not require drivers for WINXP or WIN7. Make sure your USB port is working by trying a known good pen drive, and see if it is detected.

If you are using WIN98, they may require a driver, even though the transcend website says that they do not.

Try rebooting your PC and insert your pendrive as soon as startup is completed.

For additional help, go to the transcend website:
http://www.transcendusa.com/Support/DLCenter/index.asp?LangNo=0&ItemID=TS4GJFV10&axn=SRH1_RLT&DLKeyWd=JFV10

and on the bottom of the page is a drive recovery tool that you can install and try. Please be advised that the recovery tool WILL erase anything on your drive!

Finally, if you have used your drives for copying files from a different operating system (MAC or a different version of Windows), its format may not be compatible with your PC.

Jan 30, 2011 | Computers & Internet

1 Answer

I have buy a transcend jf v30/32gb pendrive but it cannot format


insert your pen drive
click start control panel administrive tools ,computer management ,device manager scroll down universal serial bus controllers you should see a yellow question mark?
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver also
click start right click on my computer select open you should see your pen drive
right click then select format
another way is to control panel administrive tools,computer management disk management right click on your drive select format

hope this helps

Jan 27, 2011 | Computers & Internet

3 Answers

My 2GB transcend pen drive is not detected by any computer.this is the first time. pen drive JF V30/ 2GB , Mic-D33193 and SrN. 510747 1741 Please Reply me.


My 4GB transcend pen drive is not detected by my computer.I have use it before 2 times. pen drive JF V30, S/N. 302925-0046 Please Reply me.

Dec 30, 2009 | Transcend T.sonic 612 MP3 Player

1 Answer

Transcend JF v302GB doesn't work on Laptop


try on another usb port. this helps some times. U can check ur pen drive on another system. If it is not working there tehn get the pen drive replaced. If the pen drive is ok, reinstall ur o/s

Aug 12, 2009 | Electronics - Others

6 Answers

Windows 98 SE Driver for Transcend Jet Flash V60 8GB #TS8GJFV60


hi, i srinivas, i am using dual booting of win 98 & windows xp operating systems. when i am using my transcend pendrive in win xp which is easily working, but in win 98, how can we install perpect drivers for my transcend pendrive.

so please give the solution to solve my problem.

Jul 13, 2008 | Electronics - Others

Not finding what you are looking for?
Electronics - Others Logo

Related Topics:

1,597 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...