Question about Canon PIXMA iP4200 InkJet Photo Printer
Waste absorber in is full
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button 4 times, the green (power) led should be lit to reset ink absorbers.
(Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
5)At the end of the service mode, press the Power button
Posted on Jan 10, 2009
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 13, 2012 | Canon Office Equipment & Supplies
Dec 22, 2009 | Canon Office Equipment & Supplies
Dec 16, 2009 | Canon PIXMA MP160 All-In-One InkJet...
Aug 15, 2009 | Office Equipment & Supplies
Jul 13, 2008 | Canon PIXMA iP3300 InkJet Photo Printer
Jan 25, 2008 | Canon PIXMA iP1500 InkJet Photo Printer
580 people viewed this question
Usually answered in minutes!