Question about Printers & Copiers

1 Answer

Canon ip4200 waste absorber is full - Printers & Copiers

Posted by on

  • Anonymous Mar 04, 2009

    Excellent suggestion and it fixed my printer. So ... THANKS...
    Before that, I was sending around the Canon homepage to a local supplier of Spare part that will cost more that $AU30 to get the spare part ... then I was told that a Technician will need to come out and charge me $$ just to reset the printer... at the end it will cost more than getting a new printer... but I just bought some new catridge so I just don't want to waste my new cartridge... So, thanks... it is now FIXED.

    Thanks again.


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)

3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)

4) When the Power LED lights in green, press the Resume/Cancel button 4 times, the green (power) led should be lit to reset ink absorbers.
(Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

5)At the end of the service mode, press the Power button

Posted on Jan 10, 2009

1 Suggested Answer

cene765
  • 787 Answers

SOURCE: waste absorber is full in canon iP4200?

Follow this instruction:

1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button 4 of times.
5) Then press the Power button, then press it one more for turning off printer.Restart the printer and it will printing again.

Posted on Oct 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ink absober is full


Eight flashes: Waste ink absorber almost full

The printer has a built-in waste ink absorber for the ink used during Print Head cleaning. Eight flashes indicates that the waste ink absorber is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink absorber becomes completely full, contact a Canon service representative.

Important

Canon recommends that you call for service as soon as this error occurs. Once the waste ink absorber becomes completely full, printing will no longer be possible

Jan 11, 2011 | Casio Printers & Copiers

1 Answer

Canon MP460 Printer - the ink absorber is almost full. What do I do?


Before the waste ink absorber becomes completely full, contact a Canon service representative. (You will need to replace a particular part of the printer.) Canon recommends that you call for service as soon as this error occurs. Once the waste ink absorber becomes completely full, printing cannot be performed until the Waste ink tank is replaced.

Feb 20, 2010 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

Waster ink obsorber is full for canon pixma ip4200


Its full ? Have you see the ink absorbers (in the bottom of the machine?)

If the ink absorbers are ok, then you have to reset the ink count.

Nov 02, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

1 Answer

Waste absorber is full in canon iP4200?


Follow this instruction:

1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button 4 of times.
5) Then press the Power button, then press it one more for turning off printer.Restart the printer and it will printing again.

Jan 10, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

2 Answers

E27 Waste ink absorber full or platen waste ink absorber full


canon mm140 E27 = Waste ink absorber full or platen waste ink absorber full what would be made to solve this problem

Dec 06, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Printer says ''waste Ink absorber is full'' see service center


This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.

Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Canon ip4300 ink absorber is full


You need to reset the waste ink counter. The printer doesn't know that you have replaced or cleaned the pads you need to tell it.

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
Hope that helps, if it does please rate my solution.

Thanks

Nov 03, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

4 Answers

Canon printer mp160 e27


how can i get my ink absorber to be unful and work agian so i can print again WANALI

Aug 26, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

old marine
old marine

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...