An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: having trouble with installing my mini camera pro in...
Did you install the software with the camera connected to
the computer? Disconnect the camera from the USB port and reinstall the
software. When the program asks you to connect the camera, do so, and it
should work. Hope this is of some help.Bud
Below is info for setting up Audio & Video to chat on
line after you install , either Skype or a messenger program.
Web Camera’s have to be
setup on the program they are to be used with.Just installing the camera on your computer does not set it up to broadcast
on messengers or Skype.
Each program has Options that have to be setup in order for
the Audio and Video to function properly.
After downloading and installing Skype set it up as follows:
TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone
and Speakers to the computer Audio Card.
click on the Video Settings.
camera if installed properly will come up and show a picture.
on the bottom of the page click on Save.
The camera and audio should function properly.Your friends and Family will now see and
talk to you.
After downloading and installing Yahoo Messenger set it up
Messenger at the top left and click on it.
go down to Preferences and click on it.
Calling and Devices on the right and set the Microphone and Speakers to
the computer Audio Card.
go to the Test Audio section and(in blue writing) click on“Open the call setup assistant” and follow the instructions on the
you start Windows Live Messenger, expand the view by clicking on the
square on top left next to the red X.
on the Windows Live messenger window on the right side, click on “ “Show
Menus.” And then click on “Show the Menu Bar”.
go to the Menu Bar on right side, click on “ “Action.”
“TOOLS” and click “Audio and Video Setting” and follow the
NOTE:You audio and
video shoud work.Enjoy.
When done both the Audio and Video will function properly so
you can chat and see family or friends you are connected to.
Hope this helps.Bud
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a work-around if you have Win7 Pro or Ultimate (or upgrade to one of those versions). Download and install Virtual PC and the XP mode software from Microsoft. Use the work-arounds if your hardware doesn't support virtualization. (You'll find the details at the Microsoft site. My computer that currently runs XP mode handles virtualization if enabled in the BIOS so I'm not completely informed on the steps.)
Then launch the XP mode software and install the camera to that "OS" as well as the QuickCam 8.4.8 software from Logitech. This may not be practical if you want to do video-conferencing with the QuickCam Messenger. It will depend a bit on how much memory you dedicate to XP mode since XP mode is 32-bit. (It will only see 3 GB.)
Since Logitech didn't include this model of the QuickCam Messenger in their updates to the QuickCam program for later OS versions, you are stuck this XP limit. You can also use a second computer, a dual-boot computer or another virtual computer program with XP installed. However, these require a licensed version of XP. Other virtualization programs include VMWare and Parallels.
I wish that I had better news for you. (It's a pain to have good hardware and no drivers. Unfortunately, I don't know any programmers who would be willing to write the drivers and software for the web camera from scratch.)
Hello! First uninstall any WebCam software that you have. To do this unplug your camera from the USB, go to Control Panel > Programs and Feature. Next, download the full installer (select from the drop down list) for your camera and install it. The setup will guide you trough the process and eventually will ask you to plug the camera back in. Good luck
Which cameras are compatible with MSN 6.0? Below is a list of cameras that are compatible with MSN 6.0:
ClickSmart™ 820 ClickSmart™ 420 QuickCam® Cordless QuickCam® Messenger QuickCam® for Notebooks Pro QuickCam® Pro 4000 QuickCam® Zoom ClickSmart™ 510 QuickCam® Traveler QuickCam® Web ClickSmart™ 310 QuickCam® Express QuickCam® for Notebooks What are the Minimum System Requirements? The minimum system requirements for MSN 6.0 are the following:
233MHz processor or faster (500MHz recommended)
Microsoft Windows 98, Windows 2000, Windows ME, or Windows XP operating system
Minimum 64MB of RAM (128MB recommended)
Up to 50MB of harddisk space needed to install — after install, up to 15MB may be needed
256-color VGA or higher resolution graphics card (SVGA recommended)
Minimum 800x600 screen resolution
Microsoft® Internet Explorer version 5.01 or later must be installed on your computer, though it does not need to be your default browser
Note: If you are not sure if your computer meets these system requirements, please check with your computer manufacturer. Where can I download MSN Messenger 6.0? Click here to download MSN Messenger. Note: If you experience any problems downloading or installing MSN 6.0, please contact MSN for further support.