I'm using LG dvd rom..it can read dvd.. but it is unable burn dvd.. when attempte to burn dvd, error message which flagged read as 'either the drive or the device not ready'.. could u please solve my problem..
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You dont need any software to "Read" a cd/dvd. The drivers needed are automatically loaded when you install the drive.
If you need software to make "Burn" discs, there are a few good free programs.
I use CD BurnerXP.
some drives ( multi-Drives ) will read and write CDs but Only read DVDs.
Also check that the Drive supports DVD- Or DVD+ Disks.
Check that there are no yellow Marks In The Device Manager. to Do this:- My Computer/Control Panel/System/Device Manager to ensure all drivers are corectly installed.
1.if the dvd has some scrathes on it cant read as a result it cannot read 2. if the dvd is not written properly while writing using some dvd burning software it will not read that dvd properly . 3.if the dvd is pirated some dvd roms support only original dvds that might be a problem 4.if some dust accumulated on the lens of dvd rom the dvd will not get read properly for this u can use some lens cleaners and clean the lens of dvd rom it is available in the market everywhere try this it will definately work 4.after doin the above if still none of the dvd \s arent working means the life of your dvd roms lens is over now u have to get a new dvd rom
the lazer lens of your DVD rom was not able to read the disc. Clean the optical lens with soft materials. if same errors after cleaning, Be sure that your system is stable can can cause error on DVD rom if either that is not the case. maybe its time replace your DVD rom.
Dvd drives can read from both DVD and CD however due to technological limitations most DVD-ROM or RAM read up to slightly higher speeds for CDs than DVDs.
When burning DVDs professional companies that make prerecorded disks burn their disk at low speeds in an effort to achieve both compatibility and low errors, that is the reason their DVDs play on most DVD-ROMs. However DVDs me and you burn at home and work at high speeds are prone to errors and incompatibility with low reading speed drives.
As a result if your DVD-ROM has a low maximum reading speed then it can only read those prerecorded DVDs and only DVDs recorded at low speeds provided thre are not scratched.
I believe you managed to read those DVD movies if they were pre recorded.
Have you tried lowering the burn/erase speed? To begin, simply do what you need to do on the lowest speed, and then keep increasing until it gives the error again. This will most likely work. I had this problem and I burn now CDs at 16x.