Question about Samsung HT-WP38 System
Any one who can help me out pls
1) Disconnect your player from its power source for thirty seconds 2) Reconnect your player to its power source 3) Press the Power On button on your remote control 4) Press the Enter button on your remote control 5) Press the 8 button on your remote control 6) Press the 4 button on your remote control 7) Press the 2 button on your remote control 8) Press the 6 button on your remote control 9) Press the 9 button on your remote control 10)Press the Enter button on your remote control 11)Your player should now place itself in Standby mode 12)Press the Power On button on your remote control. Your player is now region free. A word of caution is that you may have disc eject issues, in which case you will have to eject from the unit, or toggle the power switch on/off. This issue only arises if you have a particular chipset in your player (about a 20% chance).....good luck my friend.
Posted on Aug 01, 2007
SOURCE: regional code for dvd player
Follow the steps below:
1. go to standby mode
2. press stop button for 5 secs
3. blink light noted
4. press "enter", "84269" then "enter"
5. shut down unit and restart
Posted on Feb 16, 2009
Tips for a great answer:
Jan 08, 2015 | Samsung HT-Z210T Theater System
Jan 10, 2011 | Samsung HT-DS610 System
Aug 24, 2010 | Samsung HT-X250T Theater System
Jan 10, 2010 | Samsung Integrated DVD Player and Home...
Dec 21, 2009 | Samsung HT-TZ312 Theater System
Jun 08, 2009 | Samsung HT-BD2R 7.1 Channel Blu-ray Home...
Dec 17, 2008 | LG LHY-518 System
Jan 20, 2008 | Home Theater Systems
110 people viewed this question
Usually answered in minutes!