Question about Black & Decker Tools & Hardware - Others
Posted by Anonymous on
A tommy bar is used to lock shaft whilst collett is tightened or reverse by spanner. Easier if motor unit removed from clamp assembly
Posted on Oct 20, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
They don't have an instruction manual online at the Black and Decker support site, but if you want a look at the exploded diagram, it's here.
Basically there's a collet nut that gets tightened down to hold the bit in place. You've got to loosen it up and you'll be able to pop bits in and out. You've got to have some way to lock the shaft while you're doing this though.
Most modern routers have a spring loaded shaft lock button. While you're holding it in, start turning the collet. When the shaft gets to the point where there's a little hole for the spring lock, you'll probably hear a little click, and the shaft will be locked so you can loosen the collet. If you take your finger off the shaft lock, it pops right back out again so hold it down while you're loosening and tightening.
If you don't see a shaft lock button, you may have a second hex nut at the base and with two wrenches, you can hold the hex nut and turn the collet loose that way.
If this answer was helpful, please give it a vote. Thanks.
Posted on Jun 15, 2010
Testimonial: "Explaination was good, alas it was also what I already assumed. There doesnt appear to be a lock for changing bits and I am back where I started. "
SOURCE: I BROKE THE PLASTIC BASE
go to Dewaltservicenet.com and type in your model number and it willl ask for the type number and you can download a manual and also a breakdown for this tool. they also have a locator for local vendors who carry their product.
Posted on Jan 09, 2011
SOURCE: I am looking for an
Use this link for a type 4 and download that instruction manual. It will apply most closely to your type 3, with very few differences, I think. The type variations are usually minor revisions of some kind, otherwise they change the model number itself.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!
Posted on Aug 02, 2011
Tips for a great answer:
Dec 25, 2016 | Rotary Drills
Jan 09, 2016 | Black and Decker USA Vintage Black &...
Jul 23, 2014 | Cisco 7613 Router
Jan 08, 2012 | Garden
Jun 25, 2011 | Black & Decker 11A 1 Router
Jan 09, 2011 | Black & Decker 11A 1 Router
Dec 21, 2009 | Freud FT1702VCEK Router
Sep 11, 2008 | Black & Decker 11A 1 Router
Jan 20, 2017 | Black & Decker Tools & Hardware - Others
Oct 12, 2016 | Black & Decker Tools & Hardware - Others
184 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: