Question about Mitsubishi WD52527 52" Projection HDTV

1 Answer

My HD only works on my video setting, but I have no sound

My HD will only work when my tv setting is on a video 2 or 3 setting. I recieve no sound when on any video setting on my tv. The picture is definitely not HD when on the normal channel setting, but it does have sound. I also do have surround sound hooked up, but even on the video setting I don't get sound from the tv speakers either. How do I get my sound with the HD picture?

Posted by on

  • abussard3 Jan 12, 2009

    I use component cables. My dvd player and ps3 both have sound, but my hd cable does not. Do I need to have the S-video cable? I am looking for anything. I also would like to use my surround sound with my cable.

  • charles durando May 11, 2010

    to solve this properly I need to know.

    What sources (DVD,cable etc.)

    how are they hooked up (HDMI, Component,etc)

    Do they go through a surround sound amp first?




×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers

Ok so the sound is fine on all of the other sources,
The component is running from the cable box to the amp, and you can see it.
just take the audio Red/Whit RCA out of the cable box, and input it to Cable/TV or whatever its labled, Red White, RCA.

If you want surround, then you will have to go Coaxial((single orange RCA) or TOS out of the cable box to the Digital input on the AMP. When you use this instead of Red White RCA, your amp will automatically switch between the different types of surround depending on what the source calls for or is encoded in.

You may have to get into the amps menu and change that amps input to Digital/Coax/TOS for the surround sound.

Any more specific questions, I need the model #s.


Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a samsung 40 tv (un40j6200afxza), backlight leds stopped working I used a flashlight to check the screen and it works decided to go with repair kit I install everything and still no backlight.


Did you do the 2 year course to become a television engineer?

This is why they can replace only the parts that need replacing and fix the set in one go.

Just because the parts are available on eBay, doesn't mean they will work, as many are pulled from scrapped televisions..

Jan 13, 2017 | Samsung Televison & Video

1 Answer

My pvs21175s1 tv+Dvd ,the tv is fine but the dvd don't play the movies !!


Sounds like its laser pickup unit has gone faulty. Contact any service technician. The disc loading mechanism should be taken out from the set, for repair and this is a skilled work. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Jan 12, 2017 | Televison & Video

2 Answers

Sound is pinned at 100% output. Remote nor physical buttons on device are working.


If any of the buttons on the remote or tv work, then try going into the menu and turning the sound down manually.

Jan 08, 2017 | Televison & Video

2 Answers

I have a rca model led65g55r120q tv flickers and no sound


Check all cables for loose connection, try another input for picture (DVD, BLu-Ray, etc). If none of the other inputs work then it's a panel problem (display) If one or more of the others work then it's a problem with either the tuner or the signal.

Jan 02, 2017 | RCA Televison & Video

1 Answer

I recently got a 51h83 toshiba tv. When i try to hook up my xbox 360 with the hd component cables in the back i get sound but no video. Please help.


WITH THE TOSHIBA 51H83TOSHIBA TV YOU CANT HOOK UP HD CABLES TO THAT SPECIFIC TV FROM YOUR XBOX 360 BECAUSE THE DEVICE ISNT EQUIPPED WITH THAT CAPABILITY

Nov 16, 2016 | Toshiba 51H83 51" Rear Projection...

1 Answer

I have checked cables and different methods of connecting, but the white and red audio out of my PVR appear to have stopped putting out sound.


Go through the setup of the PVR and check the sound settings. It sounds like it's only producing digital audio, that's why it works with HDMI but you want analog, so set the audio to stereo, or try every setting to see what works!

Jan 19, 2015 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

1 Answer

I can't get my Comcast remote control to sync up with this sylvania 32in HD tv. I tried every code in the Comcast DVR manual under sylvania tv's and nothing, I would love a fix to this problem.


the tv is likely to be generic in nature i.e. parts used by many manufacturers. if you knew what tv builder actually designed it you could find the code. does the remote have a search feature if so use it, it should find something that operates most tv functions eventually

Mar 09, 2013 | Televison & Video

1 Answer

I have a bell satellite reciever, I am trying to hook up a second tv to the hdmi output, I hooked up a hdmi splitter! but it does not seem to work. I get a picture on only one tv and no sound. when I...


NO YOURE NOT WASTING YOURE TIME YOU JUST NEED TO PUT THE MAIN CABLE FROM THE STAELLITE INTO TO WHERE IT SAYS IN AND THE OTHERS CABLES IN WHERE IT SAYS OUT AND OUT AGAIN

Apr 21, 2011 | Toshiba 26HF85 26 in. Television

Not finding what you are looking for?
Mitsubishi WD52527 52" Projection HDTV Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

71672 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...