Question about Kodak EasyShare LS443 Digital Camera

1 Answer

Regarding Error #45

Dear Sirs, This is to kindly let you know that I am a professional camera technician. Presently I am a problem with error#45 on the screen of LS443. I have replaced the FPC which operates lens motor and zoom lens motor. Because the said FPC was broken I has to replace it. But before replacing the FPC, the camera was working perfectly with all functions. But after replacing the said fpc the error is displayed on the screen. I have opened the lens barrel and the entire lens section many times and checked everything but the result is same. Lens motor is perfect, zoom lens motor is perfect, shutter coils are ok. So please help me in this matter by solving this problem. Your helpful efforts will be highly appreciate. Thanks, Hiroito

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers
Re: Regarding Error #45

Well Heero if you are the tech guy you say you are- and Kodak arn't helping you- this suggests a mainboard failure and the camera is not going to get repaired.

Posted on Jul 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Getting an error code E 45

Error 45 in your camera clearly indicates it is related to a lens issue. Something has caused the lens to jam or stop working. When it does you get the E45 error you have to update the firmware and the error should go away.
Thank you !!

May 23, 2010 | Kodak EasyShare CX7430 Digital Camera

1 Answer

I have kodak_easyshare_v610_digital_camera an...

hi, error #45 is the same with lens error and one of the lens unit is damage.your camera has two lens assy and the damage one is the lower part that always used. there'e only 2 possible way to work your camera 1.To adjust or clean the lens unit and the 2. To replace the whole assy.bring to service center and request first for estimate charge before you proceed to repair.

thank you

May 19, 2010 | Kodak EasyShare V610 Digital Camera

1 Answer

It shows Camera error 45 what to do?

The Error 45 report you have seen on your camera is related to a lens issue. Something has caused the lens to jam or stop working. When it does you get the E45 error. Update the firmware and the error should go away

Dec 24, 2009 | Digital Cameras

1 Answer

I have kodak ls443 get error message camera error e45 and it says see users guide. i have looked in users guide but cannot find andy info re error e45


Firstly, at the link below you can download a updated softcopy of the manual for free.

As for the error code you are getting, "error 45" is a lens related problem of LS443.

If the lens is not stuck, you may try to download the firmware from the Kodak site and update the one in your camera.

As the lens is already stuck, there is no choice except to send the camera back to Kodak for servicing.

Hope this can steer you in the right direction.

Kind regards

Dec 23, 2009 | Kodak EasyShare LS443 Digital Camera

1 Answer

Kodak digital camera V705 -error 45

E45 means that a focus error occurred or the MCU BOARD malfunctioned. I'm afraid you will have to give it away for a repair. It's a hardware problem. You should contact your local Kodak service center.


Aug 01, 2009 | Kodak EasyShare V705 Digital Camera

1 Answer


Dear Sirs

Apr 08, 2008 | HP Photosmart M527 Digital Camera

1 Answer

Pentax Espio 115 exhibits an H3 error and camera does not work. Sometimes it's a H2 or 1 error. What does this mean.

RE: Pantax ESPIO 115

Dear Sirs,

I bought the Pentax espio 115 Camera in Tokyo and have been well using but it was out of order suddnly .I could find in Lcd panel appeared <H3 mark>and not worked after.
Kindly let us know as quickly as possible what should I do shoot the trouble..??!
Awaiting your kind response.....
Thank you.

Mr.U.S,Yu?South Korea

Mar 21, 2008 | Digital Cameras

2 Answers

Error #45

Error message appears on EVF/LCD screen
  • Turn the camera off, then on again.
  • Remove memory card from the camera.
  • Remove the battery and wipe the contacts with a clean, dry cloth ( Battery life).
  • Insert a new or charged battery ( Loading the batteries).
  • If all else fails, get customer support help

Jan 04, 2008 | Kodak EasyShare Z740 Digital Camera

2 Answers

Regarding focus error on switching "on" camera

Hello, I have same problem with dsc-t10, when I open my camera than I found 3 motors, two of them on the right of the lens, these are to adjust the focus. One of them was broken.

Aug 16, 2007 | Sony Cyber-shot DSC-T10 Digital Camera

3 Answers


lenz motor not worck or may jam

Apr 02, 2007 | Kodak EasyShare LS443 Digital Camera

Not finding what you are looking for?
Kodak EasyShare LS443 Digital Camera Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Digital Cameras Experts


Level 3 Expert

93922 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

2598 Answers

Are you a Kodak Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides