Question about Sony Bedside Icf-c218 Automatic Time Set Clock Radio Black High-quality

Open Question

My Sony ICF-218 dream machine is running 3 minutes slow

It's running 3 minutes slow

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: how to change time

i have a 212 all you need to do is hold on the time button "Hour" or "Min" and click on change button, it sequentially increases set you desired time after it reaches 12:00 it would change automatically to AM/PM so dont worry about that now.

Posted on Feb 07, 2010

jyackle5
  • 8197 Answers

SOURCE: I can't set the time

You can get the manual on the link below. Just click on Operating Instructions

http://esupport.sony.com/perl/model-documents.pl?mdl=ICFC318

Posted on Mar 14, 2011

  • 130 Answers

SOURCE: Sony Dream Machine ICF- CS660

Belt either came off or is slipping. You can open the system up and view it yourself, just make sure the stereo is unplugged.

Posted on Apr 12, 2011

bayyagg
  • 1672 Answers

SOURCE: i bought sony radio dream

Pssst!
Did ya check the voltage input for power? Canada/USA is 110V......

Posted on Jun 15, 2011

  • 1 Answer

SOURCE: Re: Sony fm/am Clock Radio ICF-CS10iP dream

Turn volume all the way down then back up.

Posted on Jan 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I adjust the clock when it's running slow?


If your cuckoo runs too fast or slow, the best way to correct this problem is to set your cuckoo to an accurate watch or clock. After 24 hours, record how many minutes your cuckoo is running too fast or slow. Then adjust the bob up or down the pendulum stick to change the pendulms effective length. You'll need to take an educated guess as to the distance. Reset the cuckoo minute hand time to your watch or clock again. Repeat this process every 24 hours, recording the results, and readjusting the bob until you are within 3 minutes of the correct time. Then, switch from recording every day to recording every week. Use the same process described, recording the time difference, adjusting the bob up or down every week, until the cuckoo is accurate within approximately 3 minutes per week. Remember, mechanical cuckoo clocks are not as accurate as quartz or electric clocks! A three minute error per week is not bad. Maybe you can do better. What you are attempting to do is to obtain is the best timekeeping possible from your cuckoo clock. Afterwards, you will still need to sychronize the cuckoo (coo coo) clock minute hand to an accurate clock or watch, each week or as desired.

Feb 14, 2016 | Audio Players & Recorders

1 Answer

I have a 3 year old asus eee PC and it is running like a dog! Help!!!


It's an ATOM CPU @ 1.6GHz and should be running XP. Do you still have 1GB of RAM? Upgrade to 2GB if possible. Get rid of Win 7. Get rid of Ubuntu.

I got an old dog myself, and I just installed Ubuntu. Slow, but it's dual boot.

Oct 08, 2012 | ASUS Eee PC 1005HAG Notebook

1 Answer

Elite ef 9213 treadmill slows right down but does not stop after 3 minutes


LUBe the deck belt inmediately in according with the instruction manual maintenance, you have some deck belt worn. 2) Inspect the drive belt for replace.

RUN THE SOFTWARE CALIBRATION for diagnose and troubleshooting.

sincerely. God bless you

Apr 28, 2012 | Exercise & Fitness

1 Answer

W3400 runs very slow, 64 bit, 2gig ram xp-pro


Your hard drive has the defective, there are bad sectors already in you drive, that's why it run slowly even though you formatted it.

Mar 27, 2012 | E-Machines W3400 PC Desktop

1 Answer

Car shuts off after 3 to 7 miles and after waiting until engine cools will start


You mean it's hot? Don't run it if it is..................that's a sure head gasket blown or worse. If it runs a few minutes and dies,it could be the fuel filter plugging badly.
Sometimes an ignition with the computer chip or whatever in the key will stop sporadically.You need to give more details.Sounds,slowing,backfiring,jerking,etc.? don-ohio

Sep 10, 2011 | 1995 Dodge Intrepid

2 Answers

My son said that the temp guage was reading about 2/3 of the way hot. After he turned it off the fan kept running for a couple of minutes after he turned it off. This is on a 2007 Pontiac G6.


The fan will run after the engines has been turned off. The temperature gauge at 2/3...It normal when the engine ran for two minutes then turned off. It could have been hot day, air conditioner is running, stop and go traffic, drive really slow. many factors affect the temperature of a engines. One way the manufactures fix some of this overheating problems were to install axillary fans, also increasing the psi on the coolant system from 212 degree F, to 240-5 degree F. Buy doing this the half water/half anti-freeze will not boil off. Just make sure that the bugs are removed from the front of the radiator and the air flow isn't restricted. GB...stewbison

Aug 31, 2011 | 2005 Pontiac G6

1 Answer

Thinkpad R40 slow to boot, very slow in all other aspects. It can take close to a minute to just open Windows Explorer.


Hello bd35,
Welcome to Fixya!
When you say "slow to boot, very slow in all other aspects." There is a change that your computer might have been infected with a virus. But let's not jump into conclusions, I'm just setting proper expectation here that that can be a cause.
You might want to consider: - Disconnecting extra peripheral devices i.e. printers, scanners, USB flash drives or ext. HDDs - Disabling all the start-up items and services, here's how: 1. Click "Start" 2. Click "Run" 3. Type "msconfig" 4. Go to the "Startup" tab and click the "Disable All" button 5. Go to the "Services" tab, check the "Hide all Microsoft services" check box, and click on the "Disable All" button 6. Click the "Apply" button, and the click "Ok" button. 7. Then "restart the computer.

Aug 12, 2011 | IBM ThinkPad R40 2723 Notebook

1 Answer

Brinkman grill 3 burner pro series 8300 won't


To restore gas to the burners, follow the instructions below.

1. Turn the gas tank valve OFF and disconnect the hose from the tank.

2. Wait 5 minutes and reconnect the hose to the tank.

3. Open the tank valve VERY, VERY SLOWLY (Slow motion, slow).

4. Once the tank valve is fully open, light the burner farthest from the tank first and set the burner
control knob on HIGH. Does the flame height look correct for being set on HIGH? If so, light
the remaining burners the same way. Do all the burner flames look correct? If so, you solved
the problem. Remember, to always open the tank valve Very, Very Slowly.

If that didn't solve the problem, you will need to replace the grill's Hose/Regulator Assembly. It runs about $30.00 at any home center or hardware store that sells grills & accessories. If you replace it, turn the tank valve ON Very, Very Slowly.

Hope this helped you to troubleshoot and solve the problem. Happy Grilling.

Jul 04, 2011 | Brinkmann Grilling

1 Answer

It takes 2-3 minutes to spool before it prints. Runs on a network, 6 users and a file server. Printer connected via USB to file server


Okay, it's been some time since the thread started,
but finally I think I found a solution...

yea after all it was a problem with the windows firewall.
I've seen people saying add specific files to the firewall exceptions list,
but didn't work.. so I just tried adding EVERY single executable file in the folder
C:\Windows\System32\spool\drivers\w32x86\3 to the list,

and voila it worked!

however printing sharing through network still seems slow. :P

Jan 27, 2010 | Canon LASER SHOT LBP 3300 Printer

Not finding what you are looking for?
Sony Bedside Icf-c218 Automatic Time Set Clock Radio Black High-quality Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5020 Answers

The Knight
The Knight

Level 3 Expert

73698 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...