Question about Polaroid FLM-3734B 37 in. LCD HDTV

2 Answers

There is no sound on only one channel - Polaroid FLM-3734B 37 in. LCD HDTV

Posted by on

  • debnicely Jan 10, 2009

    THANK YOU !!

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 133 Answers

Go into the menue, hit setup, hit program chanels, or auto program, and let it program again, if that chanel still has no sound, then it is in the signal and not the tv, the tv cand single out 1 chanel and mess it up, the tv dont know the diferance between one channel or the next

Posted on Jan 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 43 Answers

Blown speaker ?

Posted on Nov 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Directions for remote control for model#WD40fb2530 what are the buttons for?


You have to do a channel scan to store active channels in your area, then you can press channel up or down to step through them.

Jan 10, 2017 | Televison & Video

1 Answer

How to reboot the TV channel


TURN THE TV OFF AND ON BUT DONT DO IT QUICKLY HOLD IT DOWN FOR ABOUT TEN SECONDS AND THEN TURN IT ON

Jan 09, 2017 | Televison & Video

1 Answer

Truetech 10 inch under the counter tv is stuck on channel 2. I need 3. Channel buttons on tv & remote do not change 2 to channel 3. Unplugging, Resetting hasn't worked Any ideas?


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Jan 08, 2017 | Televison & Video

1 Answer

What recording disc do I use for bdhddcombo when recording o TV channels


It is better to use the slowest eg 4X disc possible but some channels may not record due to encryption
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 02, 2017 | Televison & Video

1 Answer

Codes for channel master dvr


What model?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Dec 31, 2016 | Channel Master Televison & Video

1 Answer

Troubleshooting tv


you need to buy tv converter box,

Jun 16, 2014 | Televison & Video

1 Answer

I have a 39 inch element tv i cant program the cable channels


Typically you can access the menu, select "tuner" or something similar, make sure you're selected either on CATV or ANT (or similar), then do a channel scan. Should be pretty straightforward. Oh, and make sure you actually HAVE cable. If it's digital cable, you may need an external converter box for it to work.

Feb 23, 2014 | Televison & Video

1 Answer

My panasonic DMR-EZ45V will not auto -setup restart the dvb freeview channels it goes through the channel numbers but they do not download only the anologue channels download. it is connected to a...


I have one of these with the same problem. I couldn't find any others with answers but there are people giving answers about the DMR-EX75 showing the same problem due to power supply decoupling capacitor failure.
I just ordered a manual for mine from manualzone.com to try to locate the culprits. - Wish me luck!

Jul 25, 2011 | Televison & Video

1 Answer

How to unlock e.tv in mytv decoder and how to open scrambled channels in DStv?


How to unlock etv and scrambled channels on Mystrong Decoder

Nov 15, 2010 | Televison & Video

3 Answers

Need instructions to add TV button to AKB36157102


1. While pressing and holding down the TV POWER button, press the CHANNEL UP or CHANNEL DOWN repeatedly until your TV is turned on (or turned off if you had it on). 2. Release TV POWER button when the TV turns on or off. The remote's TV POWER button will now control the TV.

Jul 19, 2009 | Televison & Video

Not finding what you are looking for?
Polaroid FLM-3734B 37 in. LCD HDTV Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

70983 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...