Question about Texas Instruments TI-89 Calculator

Use the ^ key to insert a power (it's located above the division key) then put a negative power by typing the negative key (located at the very bottom right of the keypad next to the ENTER key) and then the number of the power.

10^-3

If this doesn't give the right result, put the negative power in parentheses. I can't remember off hand if you need to do that or not.

10^(-3)

Posted on Jan 19, 2009

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

To use the power, you use the y to the x key, above the EXP key. To enter 2 to the power of 4, you enter 2 hit the y to the x key and enter 4 and hit enter.

To use percent function, you enter the percent key after the number. To calculate Interest, where Interest = Principal x Interest x Time. For example, if the principal is $1,000, the interest rate is 8%, and time/term is 4 years, we would enter 1000 x 8 Percent x 4. When the8 is entered followed by the percent key, it should turn into 0.08.

Good luck,

Paul http://www.sharp-world.com/contents/calculator/support/guidebook/pdf/Operation_Guide_EL-531W_ser.pdf

To use percent function, you enter the percent key after the number. To calculate Interest, where Interest = Principal x Interest x Time. For example, if the principal is $1,000, the interest rate is 8%, and time/term is 4 years, we would enter 1000 x 8 Percent x 4. When the8 is entered followed by the percent key, it should turn into 0.08.

Good luck,

Paul http://www.sharp-world.com/contents/calculator/support/guidebook/pdf/Operation_Guide_EL-531W_ser.pdf

Jul 28, 2016 | Scientific Calculator Office Equipment &...

If you want to raise a number to a power, use the ^ key just above the divide key. For example, to raise two to the third power, press

2 ^ 3 ENTER

If you want roots, use the root function in the MATH menu. For example, to take the third root of two, press

3 MATH 5 2 ENTER

2 ^ 3 ENTER

If you want roots, use the root function in the MATH menu. For example, to take the third root of two, press

3 MATH 5 2 ENTER

Jan 28, 2013 | Texas Instruments TI-83 Plus Calculator

The power key is marked ^ and is located just above the divide key. For example, to calculate 2 raised to the 7th power, press 2 ^ 7 ENTER

There is no key for the universal root. The operation is available in the MATH MATH menu. For example, to calculate the 7th root of 128, press 7 MATH 5 1 2 8 ENTER

There is no key for the universal root. The operation is available in the MATH MATH menu. For example, to calculate the 7th root of 128, press 7 MATH 5 1 2 8 ENTER

Aug 04, 2011 | Texas Instruments TI-84 Plus Calculator

To enter a power of ten, use the *10^x key, located on the bottom row of the keyboard between the decimal point and the Ans keys. For example, to enter 1.2 times ten to the third, press 1 . 2 *10^x 3

To raise a number to a power, use the x^* key, located just below the big round cursor pad, between the x^2 and log keys. For example, to calculate 2 raised to the fourth power, press 2 x^* 4 =

To raise a number to a power, use the x^* key, located just below the big round cursor pad, between the x^2 and log keys. For example, to calculate 2 raised to the fourth power, press 2 x^* 4 =

Mar 09, 2011 | Casio FX-115ES Scientific Calculator

To raise a value to a power, use the ^ key located above the divide key. For example, to calculate 2 raised to the 11th power, press 2 ^ 1 1 ENTER

Feb 14, 2011 | Texas Instruments TI-84 Plus Calculator

For integral powers of ten, use the EE key, just above the 7 key. For example, to enter 1.3 time ten to the fourth, press 1 . 3 EE 4

To raise e to a power, use the e^x function (the shifted function of the LN key on the top row). For example, to calculate e raised to the 1.2 power, press 1 . 2 2nd [e^x] =

To raise any number to any power, use the y^x key, just above the divide key. For example, to calculate 3 to the 5th power, press 3 y^x 5 =

Hope this helps. If you still have questions, please feel free to respond to this post.

To raise e to a power, use the e^x function (the shifted function of the LN key on the top row). For example, to calculate e raised to the 1.2 power, press 1 . 2 2nd [e^x] =

To raise any number to any power, use the y^x key, just above the divide key. For example, to calculate 3 to the 5th power, press 3 y^x 5 =

Hope this helps. If you still have questions, please feel free to respond to this post.

Feb 01, 2011 | Texas Instruments TI-30XA Calculator

Use the ^ key located just above the divide key. For example, to calculate 2 raised to the 8th power, press 2 ^ 8 ENTER.

Dec 19, 2010 | Texas Instruments TI-84 Plus Calculator

If you want to enter a power of ten, use the EE key above the 7 key. For example, to enter

1.1 * 10^7, push 1 . 1 EE 7

If you want to raise a number to a power, use the ^ key above the divide key. For example, to enter

2^3 (two cubed or two raised to the third power), push 2 ^ 3

1.1 * 10^7, push 1 . 1 EE 7

If you want to raise a number to a power, use the ^ key above the divide key. For example, to enter

2^3 (two cubed or two raised to the third power), push 2 ^ 3

Oct 18, 2010 | Texas Instruments TI-86 Calculator

2 to the 10th power

Aug 31, 2010 | Texas Instruments TI-30XA Calculator

Use the key labeled times 10 to power X, the one between the decimal dot ant the Ans keys, in the middle of the bottom row of keys.

10 to the power 0 is entered as 1. [x10^X] 9 or simply [x10^X] 9

To enter negative exponents use the change sign key [(-)] just above the [RCL] key

10 to -9 is entered as [x10^X] [(-)] 9 result is shown as 1x10-9.

10 to the power 0 is entered as 1. [x10^X] 9 or simply [x10^X] 9

To enter negative exponents use the change sign key [(-)] just above the [RCL] key

10 to -9 is entered as [x10^X] [(-)] 9 result is shown as 1x10-9.

Jan 21, 2010 | Casio FX-115ES Scientific Calculator

May 21, 2014 | Texas Instruments TI-89 Calculator

Feb 17, 2014 | Texas Instruments TI-89 Calculator

186 people viewed this question

Usually answered in minutes!

×