Question about Compaq Modular Smart Array 500 G2 (000051869243) 146 GB Network Storage Server

2 Answers

Can't install Business Plan Pro V 11

I purchased a new computer and Business Plan Pro v 11.0. In attempting to install, it stops and indicates that BP requires Windows Vista or Windows XP SP2 to install. I have Windows XP SP2, so not sure what to try next.

Posted by on

  • mrtrippin Mar 11, 2009

    i have the same problem and i have vista for my computer...as soon as i put in the serial number i get a message to that it has stopped working.

  • Anonymous May 06, 2009

    I was attempting to install Business Plan Pro 11.0 and received the same message. It says I need Windows Vista, XP with SP2, and so on. Well I have Windows XP with SP3. Why wont it install?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Http://support.paloalto.com/index_Left.htm#StartTopic=content%2Fbusiness_plan_pro%2Finstall_or_update%2Fwindows_xpsp3.htm|SkinName=default

Posted on Jan 26, 2009

  • kakalica Jan 26, 2009

    Windows XP Service Pack 3 (SP3)


    The latest version of Business Plan Pro 11.0 will install and run in Windows XP with Service Pack 3 (SP3).



    If
    you're installing the software from a CD, you may not have the latest
    version and could encounter a message during the installation that
    indicates you need Windows XP with Service Pack 2 installed.
    Downloading the latest installer from our website will resolve that
    problem.

    Resolution

    Take the following steps to download the latest installer and use it to install our software:



    1. Click the link below to go to the Software Download page of our website:
      http://www.paloalto.com/download_softwar...

    2. Enter your Business Plan Pro 11.0 serial number and the email address you use for registrations, then click Go

    3. Accept the License Agreement and click the "Continue to Downloads" button.

    4. Once you reach the downloads page, you should be prompted to either Open or Save the installer file. Choose to Save this file to the Desktop of the computer.

    5. Once the download completes, choose to Open or Run the file to install the latest version of the software on your computer.




×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can also download SuperOrca MSI Editor, and then edit the MSI for business plan pro. Under Launch Conditions, change All Service Pack 2s to Service Pack 3, save and it should run.

to find the MSI, you can use the CD, or when you run the actual autorun, you can go to c:\documents and settings\YOUR-USER-NAME\Local settings\temp\ . it's called something like 180d2b4.msi

Posted on Apr 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my Linkstation Live LS-XL 3TB - Flashing Blue Light to stop blinking?


Lets hope you did not damage it with a failed installation. (if it was firmware) If you just tried the install CD: Most of the time when you change the router (this wifi box....) you also change the IP range. If you set a fix IP on the storage what most people do you do not find it in the new network. The solution woud be a reset, or connect a PC with old IP range, change it to the new.
What do you see in the NAS NAvigator? Quote the device name pls.

Oct 13, 2014 | Network Storage Systems

1 Answer

Installed brand new western digital hard drive into nsa210. Starter utility constantly reports invalid firmware version


Had the same problem with NSA210 when attempting to install under Win 7 - 64. I was able to install using a Windows XP machine

Feb 26, 2011 | Zyxel NSA-220 (NSA220) Network Storage...

1 Answer

I have an WDG1NC10000N (Western Digital My Book World Edition 1TB) that was connected fine to my network. Not sure when it stopped being connected, don't access it all the time, but it became complete...


check the 'entire network' sidebar in My Network Places. I installed a new version of Mionet a little while back and it decided to rename my WorldBook and change it to a different network Workgroup without asking me. I freaked out for two days until I saw the other workgroup listed and checked it out. Viola, there was my NAS just waiting for me to find it.

Aug 18, 2010 | Western Digital My Book World Edition 1TB...

1 Answer

My book western digital not getting detected in windows 7


First make sure usb cable connected to harddrive is working fine.
try it in different usb ports.
Press windows key +R key so you can see run then type in run "devmgmt.msc" then press ok so you can see device manager uninstall all usb drivers then it automatic install usb drivers.
then check.
Also you need to change registry for that type in run "regedit" then press ok then you can see registry editor then locate below key.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11 CE-BFC1-08002BE10318}
And remove upper filter and lower filter.Then restart computer then check.
Try your harddrive in different computer if it is not recognized on another computer too then your harddrive has internal issue.

Let me know if you need further assistance.
Thanks for using FixYa

Aug 10, 2010 | Western Digital My Book World Edition 1TB...

1 Answer

Won't register in My Computer


Not all third-party, e.g., IOMEGA, software has been submitted to Microsoft for their HQL "certification".
So, when you get the "this software does not have HQL certification", click "Install Anyway".

Apr 10, 2010 | Iomega 1000 GB Network Hard Drive

1 Answer

I have a FIA POPNETSERVER 4600 with no Software or Docs HELP!!!


The IP-address probably is provided by a DHCP-server on your network. Login to that DHCP-server, and look at the list of "active" clients, i.e., computers that have obtained an IP-address from the DHCP-server. One of the IP-addresses should be allocated to your FIA box.

Rather than "flatten-and-rebuild", you probably should investigate new software and new hardware to replace it, *BEFORE* it "dies", forcing you into a "panic-repair" situation, i.e., you need a "BCP" (Business Continuation Plan) which proactively addresses the non-availability of your "unmanageable" server.

Apr 08, 2010 | FIA Storage Systems Group POPnetserver...

1 Answer

HP Media Vault - Power on / fan on / front panel indicators off


I read a bunch of material found on the web. Primarily this led me to believe that the Lynix flash OS has some issues (to say the least). After carefully testing out the mom board voltages I decided that there was probably a software boot issue.

I read this at k0lee.com/mediavault/
"The MV1 has a hard reset which severs the tie to the startup.sh script that calls any of the installed software." The material on this site also indicated that the stored files would not be affected by a hard reset. So what the heck... nothing to lose. I unplugged the power, pressed the reset button and then applied power. Held the reset button for > 5 seconds. Held my breath for 30 seconds and the disk light started to flash on the front indicator panel. After a minute or two of that, the OK light came on. I pressed the power button on the front panel and the it responded. Another miracle? Hmmm. The MV shut down. I connected to the LAN and powered back on. Every thing worked fine.

I guess... there was a space issue / startup parameter corruption / enemy electron in the mix that was passed over with the hard reset at start up. Since there is on access to the OS boot process, (or source code) this is pure speculation. Although, it is reasonable speculation. Chao!

Nov 29, 2008 | HP StorageWorks Media Vault Pro mv2040...

2 Answers

My Iomega Network Hard Drive has a Problem


Reinstalled your network? I'll bet your network setting change gave your computer a new system identifier... and that the Iomega has data encryption set up to prevent anyone other than the original computer name from reading the data. What it sounds like is that when you are trying to connect to it, the Iomega is telling you that you can create a new 7Mb LUN, which is probably allocated as overhead space. Can you connect directly to the Iomega and turn off LUN security and data encryption? I'm not certain how the LUNs are created on this unit or if additional data encryption software was used, but it could be that the LUNs are set up with encryption as well. If the data encryption has it locked down to only present to the original device key, you may have no other choice but to blow away your data and start fresh. If this network hard drive is your only disaster recovery plan, I would suggest that you add a tape device and do an incremental back up this drive daily to a rotating pool of media... and a weekly full backup of everything on your network. A network hard drive is only meant to be a central storage location where multiple hosts can read/write data. The tape backup can then be used to recover your data in case of a disaster... like you've got.

Oct 26, 2007 | Iomega NAS 200d 160 GB Hard Drive Array

1 Answer

Freecom 400gb Drive


Have you tried to connect those drive individually and checked if they get detected when stand-alone? If they get detected stand-alone, install the Freedom software happen. Cheers

May 23, 2007 | Freecom (24358) 160 GB Network Hard Drive

Not finding what you are looking for?
Compaq Modular Smart Array 500 G2 (000051869243) 146 GB Network Storage Server Logo

Related Topics:

2,397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Network Storage Systems Experts

Geoff

Level 3 Expert

413 Answers

Brad Brown

Level 3 Expert

13577 Answers

Daily Mehdi
Daily Mehdi

Level 2 Expert

48 Answers

Are you a Compaq Network Storage System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...