Question about Televison & Video

1 Answer

How do I set up a ps2 to a insignia 26" flat screen tv?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 198 Answers

What's great about it: Simple hookup, sound and picture are very good, wide picture is a must, and yes a good price and better protection What's not so great: None I have just bought this beautiful Insignia TV set earlier this afternoon. My uncle bought it for me, because my old Magnavox 19 inch television set is almost at its DOA. The old TV didn't get the picture immediately once I turned that on--I only waited like over three minutes or more for the picture to come back on. But this Insignia TV is really good. 26 inches, combined with a DVD Player, and it really has some cinematic quality. The hookup was quite simple, but the hardest part of all was to autoscan once I turned it on for the first time. But that was no longer a problem, because my landlord showed me how to autoscan. Just simply press the menu button, and select the autoscan. Once the autoscan is complete, the cable is like back on, and it looks better than my old TV I had for almost 14 years. I went to my local Best Buy in the mall, and one of the clerks recommended it to me. Ironically, my uncle has the same exact one that I have right now. It really fits in my living room on top of the TV Table. It's HD all the way, and I love it. Despite the price, it's an awesome TV and excellent quality to boot and it really delivered. Everything else was all set and it didn't require any unnecessary reinstallations with my VCRs, Playstation 2, cable converter, and of course, my other DVD Player. Great TV, for a not too bad of a price and since it's flatscreen, I would probably have enough room to put my Playstation 2 next to it, and like my new TV my PS2 can probably fit there without much incident. Nothing really bad. It seemed good enough for me and my twin sister, and it seemed good enough for my uncle who bought it for himself before he bought it for me. The price was too much for me--more if you can count an extra $70 for the extended warranty plan. But other than that, it was worth it. It was definitely worth it. SInce it's widescreen, I will want to keep it widescreen all the way--unless I can zoom in for the most important parts, especially if I can do it while playing a tape in my VCR (seperate from the TV). If you want a good quatlity TV with superior cinematic quality, and you can get closer views with everything you ever dreamed of getting for your house or apartment, or wherever else you live, then The Insignia 26 inch HDTV set is for you

Posted on Nov 27, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: Connecting Sony PS2 to Panasonic HT32LZD85

First off you need to retire that ps2 and join the PS3 revolution, well worth the money although with the recent drop of the inferior x-box 360 the PS3 may follow suit shortly.

Now, I'm gathering from your discription limited as it may be that you had an adapter that connected the the stock cable that was included with your ps2 which consists of the end that interfaces with the ps2 and the end that is ment to provide the signal to your tv which includes your composite video (yellow) and your left and right audio (red&white).

If this is case then it should be a simple matter of removing the adapter that changed the source (ps2) signal to aerial and pluging the yellow red and white cables direct to your tv (standard imputs at the rear of the television should be video 1,2,3 ect.

Then just make sure your tv is on and set to the correct imput and you should be rockin and rolling in no time.

Posted on Oct 03, 2008

  • 1 Answer

SOURCE: Code for cable TV remote - 26" Insignia 720p HDTV

I just bought a 32" Insignia NS-LCD32-09 using the Cox (suddenlink) remote and the code 0463 worked fantastically for me, Thanks!

Posted on Dec 12, 2008

  • 122 Answers

SOURCE: how do we take the stand off of a 26" Insignia flat screen tv/dvd

Look on the back - there are screws holding the stand mount

Posted on Jan 09, 2009

  • 7 Answers

SOURCE: What do I clean the 26 inch Insignia HD Flat

Take a cloth and there are many solvents available in the market bring it and take a tissue and wipe the Flat screen Tv its simple

Posted on Mar 29, 2009

ginko
  • 19396 Answers

SOURCE: 26" Insignia LCD TV will not power up. Green Light Blinks 1x

If the TV goes in standby, then it is in protection mode.

Ensure also that the fault is not coming from a faulty receiver box sending
bad signal, check if you get same problem on DVD with no receiver box
connected.

Try first leaving the TV power cord unplugged for some times, let say one hour or so.

The flashing light indicates a diagnostic state called protection.
When the TV goes on protection there are only two possible causes.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , starting the flashing light.

If you are in situation one, then the TV will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

If you want to DIY you find parts here,

All: Appliance parts, electronics parts & more from PartStore.com

Encompass Parts Distribution

LCD/Plasma Electronic Replacement Parts: Plasma & LCD TVs, Appliances |


On LCD Pay particular attention at inverter and power board, power board can be inspected looking for bulged or leaking capacitors, then tested with a multimeter. The inverter is more difficult to test , there is need to read voltages, should be done by a tech. Also the LCD controller board can cause same problem

On Plasma, test Sustain (Ysus/Zsus) / Buffer boards , cables to plasma, digital board and power board.

On Rear Projection : check lamp, lamp ballast, power board, and convergence.

On CRT TVs, check ballast , flyback transformer, CRT, Tuner, Convergence.

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set up a PS2 on an Insignia NS-40D510NA15 flat screen tv?


That seems like all you should have to do. Are you selecting the correct Input Source on your TV???

Oct 03, 2014 | Sony PlayStation 2 (PS2) Console

2 Answers

26" Insignia TV, screen is


Go to your menu and choose picture. See if your settings are normal or if the brightness is turned down. If it isn't then it's a problem with the T.V.

May 04, 2011 | Insignia LCDTV26 26 in. Television

1 Answer

How do I remove close caption wording on my tv screen??? (Insignia 42" TV don't know model number.)


Here is a manual for a 42" Insignia. Hopefully it's similar http://insigniaproducts.com/cms/documents/NS-42LCD%20UM%20EN_SP_FR.pdf
This one says the closed caption settings are in the "system setup" menu.

Feb 11, 2011 | Insignia LCDTV26 26 in. Television

1 Answer

Aspect Ratio problems with Insignia 26


Keep your Auto Zoom Off set Full screen than only you will get proper picture

Jan 21, 2010 | Insignia 26 in. LCD Flat-Panel HDTV

1 Answer

My insignia NS-L26Q-10A 26" LCD television is showing that it is 420i on the screen and I understand that it is supposed to be 720p. How do I change this?


This may have to do with the settings on your DVD player or cable/satellite box. Change the settings on those devices to output the desired resolution (720p) and adjust your TV settings appropriately. More details about the TV settings can be found in the owner's manual.

Dec 29, 2009 | Insignia NS-L26Q-10A 26 in. LCD TV

1 Answer

Can't get closed caption off my 2008 flat screen Insignia. Hitting 'off' on the menu doesn't work.


go through the menu until you find a section called restore defaults, factory default setting, something along those lines. reset that and you will be good to go!

Aug 19, 2009 | Insignia NS-L26Q-10A 26 in. LCD TV

2 Answers

What do I clean the 26 inch Insignia HD Flat Scrren Tv with?


Call MCM Electronics, 1-800-543-4330. Ask for PH62029 Philips Big screen clening kit. $11.95
Or go to link www.mcmelectronics.com

Mike

Mar 28, 2009 | Insignia NS-LCD26-09 26 in. HD-Ready LCD...

1 Answer

Insignia tv 26 LCD tv/dvd combo problem


I have an Insignia 26' LCD TV with a built in DVD player and all I get on the screen is a box that says No Database.

Jul 26, 2008 | Insignia LCDTV26 26 in. Television

2 Answers

"Alarm" wake up


Not all TVs have this function. Have a brand new HP LCD 42" TV, doesn't have the function available.

Jul 07, 2008 | Insignia 26 in. LCD Flat-Panel HDTV

1 Answer

Insignia 26" HDTV


Try Insignia's help line: 877-467-4289

Apr 21, 2008 | Insignia LCDTV26 26 in. Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Cindy Wells

Level 3 Expert

5126 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...