Question about Coleman 10' X 10' Sundome Tent 9160K101
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Have a coleman furnace and
There will be a small tube that goes from the induction blower housing to the switch itself. Try to blow and **** through this tube with it attached to the switch. If you hear a click on the inside of the switch, it is good, if not, then it needs to be replaced. Another thing to try, take a small wire or paperclip and poke through the hole that the hose came off of on the housing, sometimes this gets clogged and will cause the same problem. Other than that, it will be a blocked flue or the inductive blower itself not performing properly. Hope this helps and good luck!
Posted on Sep 28, 2010
Here is a list of each common terminal and what their commonly used for. Alsolisted is what colors are commonly used. NEVER ASSUME these are what youhave. Verify all your wires by following each to each piece of equipment. Thiswill help you to be able to match your equipment with the terminal.
Here is the rest of the tip that I wrote...
Thermostat Wiring and Terminal Designations
heatman101If you have further questions, then comment back to me...
Posted on Oct 15, 2011
I would not try to do this, in the uk you need to be properly certified to work on such items. If you make a mistake you could blow up.
Posted on Oct 18, 2015
Tips for a great answer:
Oct 17, 2015 | Coleman Heating & Cooling
Jan 30, 2013 | Coleman DGAA070 Automatic Hot Surface...
Jan 25, 2013 | Tools & Hardware - Others
Oct 26, 2011 | Coleman Propane Forced Air Heater...
Oct 10, 2011 | Coleman Propane Forced Air Heater...
Nov 11, 2010 | Heating & Cooling
Sep 29, 2010 | Coleman Propane Forced Air Heater...
Jan 25, 2010 | Coleman Heating & Cooling
Nov 02, 2009 | Coleman Propane Forced Air Heater...
Jul 08, 2009 | Coleman Heating & Cooling
86 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: