Question about Sony FD Trinitron WEGA KV-32FS320 32" TV

1 Answer

The stand by timer flash 9 times stop and start again

I went to a website and it says this: Nine blinks - Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator. Make sure the part number is -12 or -13. Basically ,this is what happen sometimes it turn on and sometimes I get the flashing thing (9 blinks) and it takes up to 5 days to get my tv on again. Can I get a better idea what's going on with my sony tv.

Posted by on

  • 1 more comment 
  • needin a fix Nov 26, 2007

    intermittent on. just started turkey day 07. service $100 yesterday just to look at it...they had no idea. I checked surge strip, tripped!? 9 blinks purchased Christmas 05 sears...

  • lamarie Mar 14, 2008

    I have the very same problem. Bougth the TV in March of '06; beautiful picture.

    2 months ago, the Timer light starts blinking 9 times whenever I attempt to turn the TV on. Goes on like this for days then it suddenly works intermittently.



    I am a trained electronics technician (20+ years) but have been unable to obtain technical reference (schematics) on this brand.

    Any suggestion on whee I could obtain the schemati diagram for this model?



    Thanks.

  • candyrps Jun 05, 2008

    blinks 9 times will not come back on if turn off until next day

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

You have a regulator problem my friend in the power supply or there is a fault in the G board. This is not a repair an untrained person should attempt, please get a pro to assist you in this repair.

Posted on Jun 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony Trinitron won't turn on red light blinks 9 times


Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not re-solder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negative).

Apr 29, 2012 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

TV won't turn on and standby light blinks 9 times... what can I do to fix this? Thanks, David


Nine blinks - Indication of shorted/leaky diodes - D6116 and D6301 on the "G" board. Panel Module Error or Thermal Error. Unless you are technically experienced, this can only be repaired by an authorised service centre. Obtain a quote for this, the parts are inexpensive, but labour costs might not be.

If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching IC regulator on the "G" board or check connections. Make sure the regulator is -12V or -13V (negative rail).

If the repair is done by an approved workshop, they will clear the error codes (standby LED blinks) as part of their 'soak-testing' and it should reset the TV back to factory condition. Remember to ask about what work was done and if the errors have been cleared/reset before you pay their bill.

Mar 27, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Stanby light blinks 9 times after powering on but no picture


  • Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections.
Hope that helps.

Jan 17, 2011 | Sony KDL-46XBR2 Television

1 Answer

I have a flashing stand-by timer with a green screen. The stand-by timer doesn't flash all the time so i get a picture when it's not flashing. Is there anything i can do to rectify the problem or do i need...


If you can let me know how many times the licht flashes, I can tell you roughly where the fault lies. If it flashes in groups of 5, then it has a tube tracking problem possibly due to a weak tube.
Here is a list for you to decide what to do;

  • Unit is dead, No blinks - Problem in the standby power section. Might check fuse, R607, Q601, IC601, R612 and VDR601 (should show open).

  • Continuous blink once a second, no pausing - No reply from the jungle IC301 (data bus is busy, shorted to ground, or held high), IK video path is defective.

  • One blink - not used for the self-diagnosis

  • Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

  • Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit, check T603 and R672.

  • Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check IC1509, Q1505

  • Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

  • Six blinks - No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately. Check C515 & 516 and the jungle IC, IC206.

  • Seven blinks - High voltage shutdown. The high voltage has exceeded 33k and the unit goes immediately into safety shutdown. Check power supply regulation and horizontal circuits.
  • Eight blinks - Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high voltage circuits are defective on the D board.



  • Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive).
  • Ten blinks - Check Q8014 and Q8013 for shorts, leakage, or bad solder connections on the " D" board. If the transistors are bad, check R8051 and IC8005, also on the "D" board.
Hope that is useful.

Jan 16, 2011 | Sony KV-32V65 TV

1 Answer

My Tv is blinking a red light at me, 9 times, when I try to turn it on. It will not come on.


Hello

  1. Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not re-solder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negative).

Nov 19, 2010 | Sony KV-36XBR400 36" TV

1 Answer

TV won't turn on, standby light just blinks 9 times


hello, Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive).

regards
shaun

Oct 19, 2010 | Sony KP-46WT520 46" Rear Projection...

1 Answer

Stand by light is flashing 9 times


hello Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive).

shaun

Nov 20, 2009 | Sony Grand WEGA KF60XBR800 60" Rear...

1 Answer

Red stand by light blinks 8 or 9 times and no picture or sound


hello Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high voltage circuits are defective on the D board.Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive).

shaun

Oct 18, 2009 | Sony KP-51WS510 51" Rear Projection...

1 Answer

TV will not come on. TV standby light blinks nine times continuously. TV is Sony KP-51WS520


Nine Blinks- Replace D6116 and D6301 on the "G" board, do not solder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negative).

Mike

Apr 16, 2009 | Sony KP-51WS500 51" Rear Projection...

1 Answer

Won't turn on


Diagnostic code meaning;

  • Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive).


  • Hope it may help you;

    Regards,
    VOTIT

    Sep 15, 2008 | Sony KP-46WT520 46" Rear Projection...

    Not finding what you are looking for?
    Sony FD Trinitron WEGA KV-32FS320 32" TV Logo

    Related Topics:

    523 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sony Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    75888 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Jerry Greenberg
    Jerry Greenberg

    Level 3 Expert

    1689 Answers

    Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...