Question about Audio Players & Recorders
My Mac sits on a desk and my surround sound sits on the floor under the desk; can the magnet in the subwoofer make my video/display go bad?
Most computer speakers are (SHIELDED) and this protects electronics from the magnets in the speakers! So you should be safe if your surround sound system is made for a computer system! ( if not two feet is a safe distance)
PLEASE rate my response to your question
Posted on Jan 10, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 29, 2014 | Logitech Z506 Surround Sound Speakers
Sep 01, 2011 | Theater Research TR-2810 Main / Stereo...
1. Connect the black plug of the rear right speaker into the black plug on the subwoofer.
2. Connect the yellow plug on the rear left speaker into the yellow input on the subwoofer.
3. Connect the red plug of the front center speaker into the red input on the subwoofer.
4. Connect the white plug of the front left speaker into the white input on the subwoofer.
5. Connect the d-sub connector plug from the front right speaker into the d-plug connector on the subwoofer.
6. Connect the green, black and orange input to the matching plugs on your computer. If you have a four-channel sound card, connect the green plug from the input audio cable to the front plug of the card and the black plug to the rear plug. Do not connect the orange input. If you are using a two-channel sound card, connect the green plug from the input audio cable to the "Line Out" jack on the sound card. Do not connect the green and orange plug.
7. Plug the subwoofer power chord into the electrical power outlet.
8. Place your subwoofer on ground around your computer desk. Position the front center speaker on top of your computer monitor.
9. Place the left and right front speakers on the sides of the monitor. Position the left and right rear speakers behind you, making sure they are pointing toward the front left and right speakers.
10. needs to support 5.1 surround. Normally, more than three sockets for sound indicates that it does. Then you need to use the software that comes with the sound hardware to configure it for 5.1 - Default will be 2.1 or just 2.
Check the control panel out. This is a lot easier under Windows 7.- Here you can access what you need via the speaker icon on the system tray (right click)
There is NO problem with your OS or hardware, this is pretty standard...
hope this will help you solve your problem.
Jul 18, 2011 | Logitech X-530 Computer Speakers
Jun 21, 2011 | Panasonic Home Theater System System
May 24, 2010 | Samsung SyncMaster 720N Monitor
Apr 11, 2009 | Computers & Internet
Feb 13, 2009 | Samsung 793DF 17" CRT Monitor
Feb 19, 2008 | Logitech S200 Computer Speakers
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: