Question about Dell Dimension 2400 PC Desktop

1 Answer

Can't access video on a website

I subscibed to www.icenetwork.com. When I try to upload a video I get an error message that reads: "Cntent was blocked because it was not signed by a valid security certifidate. Icenetwork suppost says this is a computer problem and I needed to contact the manufacturer. That's you. I have a Demention 2400 running Microsoft xp home. version 2002 service pack 3. CeleronR cpu 240 Ghz 512 MB ram. I have tried using both the microsoft browser and the ATT Yahoo browser. Same result.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

  1. Click Start, click Run, type timedate.cpl, and then click OK.
  2. In the Date and Time Properties dialog box, click the Date and Time tab, and then set the correct date and time. To do this, follow these steps:
    1. In the Date box, click the current month in the month list.
    2. In the year list, click the current year.
    3. In the calendar, click the current date.
    4. In the Time box, click to select the hour, and then use the up or down arrow to adjust the hour. Repeat this procedure for the minute and second settings.
    5. Click AM or PM, and then use the up or down arrow to change to AM or PM.
    6. Click the Time Zone tab, and then click the time zone for your current location in the Time Zone list.
  3. Click Apply, and then click OK.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What software should I use to bypass my university internet restrictions?


If the games are in fact, "yours" then you can configure your game server to publish on the normal HTTP port (80). Then, you will have no trouble at all.

I hope this is helpful,
--Robert

Oct 29, 2014 | Computers & Internet

1 Answer

How to fix computer problems for free


First make certain you have a virus program running and do a full scan. There are free ones around, most use AVG. You can get pop-up blockers, or look at internet options and select block pop ups.

Visit the following website called Black Viper. Follow the instructions and that should speed up your computer.
http://www.blackviper.com/

Mar 07, 2014 | Computers & Internet

1 Answer

No disc problem


You would only receive that error if your player in unable to read your disc, basically saying there is no disc in the unit. This problem arises mainly due to the Optical Pickup(laser) probably failing. For more information, please visit my website at audioserviceclinic.com. Thank you.

Nov 27, 2013 | Computers & Internet

2 Answers

Www.hp.com/go/techcenter/startup


My computer is appear " The System BIOS has detected that your notebook PC was not into hibernation or shutdown to avoid overheating.The system is now operating normally.
Overheating may occur if the cooling vents are blocked or the operating temperature exceeds the specification.The notebook PC should return to normal operation once the situation is resolved."
System temperature (90D)

Apr 08, 2012 | Computers & Internet

3 Answers

How do I hide my toshiba bar on the left of my screen. it contains photo/video, settings, effect, face recognition


Point your mouse cursor on it, drag ( hold left click) move it to the top of the screen.
or you can try click setting >> auto hide checkbox

akee.4shared.com

Aug 15, 2011 | Toshiba Computers & Internet

1 Answer

How do i reset my computer to an earlier date?


Most computers have a RTC or "real time clock" in the BIOS. BIOS (or "Basic Input Output System") controls how data gets into and out from the processor (via keyboard, disk, etc.). Be careful making changes. The BIOS is normally only accessable when the computer is powered on or reset, and then only while performing the POST (or "Power On Self Test"). At this time your screen may display text describing memory, drives, controllers, etc. Some machine have a "silent boot" enabled which displays a manufacturer's graphic or logo instead of this data. It is during this time the the BIOS may be accessed. Depending on the manufacturer of your computer, a key (Delete, Escape, F1 or some other) or key combination (ALT + F1, ALT + S, or some other) will be needed. It is required to press the key or key combination prior to the Operating System loading message(s). This can be done be repeatedly pressing the key (or key combination) once every second (or two) during the POST. Holding the key(s) down the entire time - or pressing them too often will result in an error, and require starting over again.

Once the BIOS screen is presented, you will have to scroll the entire page(s) to find the clock. Most BIOS brands have more than just a single page of settings. Using the the up, down, left, right, PgUp, PgDn & Enter keys - navigate to the clock hours and minutes and adjust as needed. Make sure that you SAVE changes before exiting the BIOS screen. Upon exit, the computer will reboot with your settings.

Your Operating System may also provide a way for you to change the system time (and date) as well. Try clicking on the time / date to see if it will bring up a dialog box that allows you to make the change.

I hope this helps and good luck! If my answer was helpful, please rate it "4 thumbs up" Thanks!

Jul 27, 2011 | Computers & Internet

3 Answers

How to install Anti virus on my desktop


Following the steps to install antivirus on you pc.

Compare antivirus software. Look at the features and benefits of each. Read reviews from authoritative editors from magazines such as "PC World," "Smart Computing" and "PC Magazine." Editors who write for these magazines typically test antivirus software as an unbiased outsider and write about both the good and bad sides of antivirus software. For example, the editors at "PC World" recommended Avira AntiVir, Avast Antivirus and Panda Cloud Antivirus in an August 2009 article. Visit the websites of each antivirus program to view screen shots and descriptions of how the program works. Make a final decision about which antivirus program you want to install.

Navigate to the website of the antivirus program you've chosen. Go to the "Downloads" section of the site if you're obtaining a free antivirus software. Click on the "Purchase" section or "Buy" button if you have chosen licensed software; pay for and complete the transaction. Click the "Download" button or link for the antivirus program. Save the file to your computer desktop or to a computer directory or folder which you can easily remember.

Find the antivirus program file you downloaded on your computer. Double-click the ".exe" file (which is an executable file that will install the antivirus program). Once you double-click the ".exe" file, the installation process will automatically begin. Click "Continue" or "Next" on each screen to complete the installation process. Enter your name and contact details if registration is required. Follow any other on-screen prompts to complete the antivirus program installation. Restart your computer if necessary.

Feb 18, 2011 | Computers & Internet

1 Answer

I can't get my computer to accept my user password to logon to my computer; password is correct and is being typed correctly. I get that wrong username or password message. In addition to this, my...


Please download the ERD Winternal Image from http://www.mininova.org/tor/857048 and burn it in a CD.
Thenboot your PC from the CD. Select your Windows Media Edition for whichyou have forgot password. Without asking for any password you will getinto Windows. Then goto control panel->User Accounts->Select theUsername[for which u want to change password]. Then use change passwordoption to change password. Then Reboot the PC and remove the CD. Nowyour windows password will be reset.
Thanks.

Mar 08, 2009 | Computers & Internet

Not finding what you are looking for?
Dell Dimension 2400 PC Desktop Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18354 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...