Question about Mitsubishi WD-52725 52". Rear Projection HDTV

1 Answer

Severe Ghost. With today economy we're trying to help my aunt, she is in a ( fix income) She has a Mitsubishi 1080, Model #WS-B55 with a severe ghost, the top is red and the same picture appears below the red except it is green and distored. In the menu adjustment settings: I had aligned the red and blue to the center cross. Upon cheking the grid adjustment where the red and blue appears again it shows it out of alignment. The original white grid is now saggin down tours the middle and acourse it is throwing all alligments (red and blue) off. Also can you give us any idea what the cost will be to fix the problem. If I can help her solve this problem it could be helpfull. Please note these problem pretain to the TV, not my aunt !!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

Mitsubishi has been known for having bad solder connections on their Convergence ICs from the factory. If you are tech savy, and don't mind doing some soldering, follow these instructions:

Unplug set, remove the back cover, find the convergence board (should be labeled, if not it is the long narrow board usually on top or side), find the convergence ICs on the heatsinks and resolder all the pins and ground. This should fix your problem.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my led tv UE46D500 has no picture only sound.unplug for few hours and the picture comes back.now I have this problem every day sometimes I got the picture and sumtime no picture whole day. Help pls


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board...

Jan 10, 2017 | Samsung UE46D5000 116.8 cm 46" 1080p...

1 Answer

Sony Bravia KDL-52Z5100 Ghost Images. What part do I need to fix


There are many reasons for this fault. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Search the site by type in the "brand name" of your device, in the "Search box at the top right of the Homepage" to get gathered related posts.

Jan 09, 2017 | Sony Televison & Video

1 Answer

I am getting pastel vertical lines down the right side of my Mitsubishi 40134. Is it fixable?


The TCON board or the LCD panel is Faulty, Can confirm by replacing the TCON board .
If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Jan 09, 2017 | Mitsubishi Televison & Video

1 Answer

Telefunken crt model Ttv280 Frame collapse how will i know if is the vertical ic or the jungle ic


Absence of Vertical scan output signal. You have to check its vertical scan output section circuit to detect and rectify this fault.
Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Type in this key phrase " my service table today " in the search box at the top right of the the home page, to get gathered some pages which has the details of practical experiences of the author of that site. The search result might display about 20 Nos of related posts. Press the "All posts" at the bottom of the list, then you can select them one by one.
Similar fault symptoms and repair work has been described by the author.

Jan 09, 2017 | Televison & Video

2 Answers

My samsung smart tv hdmi ports do not work anymore


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jan 09, 2017 | Samsung Televison & Video

1 Answer

The DVD player on my Bush 32inch television takes in DVD's but just displays 'No Disc' the model number is DLED32165HDDVD Is it something I can fix?


The player has failed, these types of devices are not fixed as the cost to repair is in some cases more than a new one. More than likely you could not get parts for it even if you knew the cause, which is most likely a failed laser light

Jan 06, 2017 | Bush Televison & Video

1 Answer

To begin with I have Dish network my TV went off and since then in order to have picture and sound i have hookup HDMI cable and also video cable to have picture and sound


You need to set up the dish box for the correct resolution ie 720/1080 etc.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 05, 2017 | DISH Network Televison & Video

1 Answer

No sound on my alba DVD1620 I've tried 2 scarts the picture is fine please help


Apprently another customer had the same problem. They were told that there is a volume control on the remote control and using that fixed the problem.

Jan 25, 2015 | Televison & Video

33 Answers

TV just flashes different colors


You have entered a diagnostic colour test. With the TV powered on, hold the 'Menu' & 'Enter' together, then press the power button. Problem resolved

Jun 25, 2006 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
Mitsubishi WD-52725 52". Rear Projection HDTV Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

71006 Answers

Jaime Hernandez

Level 3 Expert

2271 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...