Question about Epson Stylus Pro 7600 InkJet Printer

2 Answers

Epson 7600pro air in ink line

There is air in the ink line on my epson 7600pro and I will not print.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points
    MVP:

    An expert that got 5 achievements.
    Governor:

    An expert whose answer got voted for 20 times.
    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 50 Answers

You can try an Initial Fill of your ink carts. It is the next level after attempting to clean the heads. However, if this only temporarily fixes your problem, you could have a leak in the supply tubes, or the head could have failed.

Turn the epson off. Hold down the buttons [Paper Feed δ]+[Paper Feed ∇]+[Cut/Eject] and turn on the printer. This will take you into a hidden service menu. Hit the [Paper Feed ∇] button until you get to "Cleaning" then hit the [Select] button to enter that submenu. Hit the [Paper Feed ∇] again until you see "Init Fill", and then hit the [enter] button. The display will say "charging". Just wait until it is done, then turn the printer off and back on.
If you do not have enough ink in the in the carts you will be prompted to replace them. The same goes for the maintenance tank. Make sure you put the ink lever back in the lock position if you change the carts. (It will not give you an error about the ink lever being down, it just won't do anything.)

Posted on Jul 16, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have air in my 7600 print line . followed best solutoion could not find cleaning all I got was veiw counters. could not find ccharging.

Posted on Jan 19, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya.com

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horizontal lines on page
Your printer head - the ink cartridge in case of most HP deskjet printes, in most cases is defective and you need to replace it to have a clean print.
Anyway, read this tutorial, has some good tips:

HP Deskjet D2500 Printer Series Horizontal Streaks or Lines in the Printed...

For Epson printers, read this


Epson Stylus Color Ink Jet Printer


Epson Printer Horizontal lines


Same for Cannon priters


Horizontal lines when printing with Canon ip4500 Forum Thread

Aug 23, 2015 | Office Equipment & Supplies

1 Answer

XP-310 Changed black ink cartridge it now prints the bottom half of the 1st line, prints the next 4 lines and then 1/2 the next then prints the next 4 lines
Sometimes when you change ink carts on Epson printers, you can trap some air in the print head. Let the printer sit overnight, and then run a "head cleaning" followed by a "nozzle check". You can repeat the head cleaning up to 3 times before it doesn't really help any more.

Oct 15, 2014 | Epson Expression Home XP-310 All-in-One...

1 Answer

The printer has suddenly stop printing. It acted like it was running out of ink-skipped every other line for a few lines. Changed the black cartridge twice and it still will not print-nothing at all. I...
theres a few solutions to this

first the printer is broken,check out warrenty status where you got it form or at the epson site

the c88 printers some times have problems with faulty ink injectors. if the printer is left alone for a long while ink dries up in the tubes and stays there preventing you form printing. put it near a heater (not too close so it burns) just close enough for a few minutes just to warm it up past room temperature then replug it again doing a nozzle flush with some compressed air /check nozzle status with the program epson supplied

Mar 07, 2011 | Epson Stylus C88 InkJet Photo Printer

2 Answers

Epson Stylus Pro 7600. I thought my problem was that I had air in the ink lines. The lines are mostly full of ink, just a few bubbles in a few of the lines. But when I print a nozzle check, hardly any of...
Hello. With Epson 7600, "bubbles mean troubles". If you have done the power cleaning

Jan 25, 2011 | Epson Stylus Pro 7600 InkJet Printer

1 Answer

Change black ink and now prints with white lines through the words on every other line
It is CLOGGED print-heads that cause the ink to _not_ be sprayed onto the paper, resulting in "white" horizontal lines.

Run a "print-head-cleaning-cycle", using the Epson software installed when you installed the printer.

Aug 28, 2010 | Epson Stylus NX100 InkJet Printer

1 Answer

White lines running through printed line
The white lines occur when the print-heads do *NOT* output coloured-ink when they should be.

Run the Epson printer-software to "clean-the-print-heads".

May 29, 2010 | Epson Stylus DX4450 All-In-One InkJet...

1 Answer

The printer is only printing in two colors and only in lines going across the page. not a full print
Make sure that the ink you have, is Epson Ink.

I bought a compatible, supposely ink, and when I put it in, Colors did not come out the same. Lines and words, did not print out properly.

So I threw the ink cartridges, and bought original, Epson Ink, and Ooh-LA-LA, Printed out just fine.

Go Figure.

Good Luck

Nov 03, 2009 | Epson Stylus CX5000 InkJet Photo Printer

1 Answer

Horizontal lines (red) on first 1 - 2 pages of initial print-out
Do you refill ink tank? Print blank pages. Is there horizontal lines appear? It might be caused bay ink leakage. Check respiratory hole at ink tank and rubber seal at bottom of ink tank. Print blank pages until no horizontal lines and try to use new ink tank.

Aug 17, 2009 | Epson Stylus Photo 1270 InkJet Printer

1 Answer

Printing
I would venture a guess that probably you both had the cartridge refilled. That is probably why there is air inside the cartridge. In effect a tiny air bubble acts like an air dam. You can try doing a lot of nozzle cleaning. There is a chance it flush out the air. Since is doing partial printing, chances are the bubble is not inside the printhead. So hopefully the flushing should solve both your problems. If it doesn't I'll refer you to a site where you can see the video of how to flush out the air. Also make sure you turn off your printer on the printer's power switch and not the AVR or power strip. This is sometime a cause for the blockage and sometimes it is also causes ink to dry up on the print head causing another kind of blockage.

May 11, 2008 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Epson Printer - Skipping When Printing Black
If you try the print head alignment or head cleaning wizard under the maintenance tab, they may help!

Dec 18, 2007 | Epson Stylus CX3810 All-In-One InkJet...

Not finding what you are looking for?

View Most Popular

Stylus Pro 7600 InkJet Printer

  • Office Equipment & Supplies

Related Question

Horizontal lines on page

  • Office Equipment & Supplies

Open Questions:

0 Answers

why do I keep getting error code oxf3

May 05, 2016 | Epson Stylus Pro 7600 InkJet Printer

0 Answers

I am getting an 00010000 error signal on my Epson 7600 printer. Changing the paper feed motor did not correct theproblem. What else coud it be? I understand that the error 00010000 is supposed to signify that the paper feed motor is bad. I had an authorized Epson repair center replace the motor but the error persist. What can I try next?

Oct 12, 2014 | Epson Stylus Pro 7600 InkJet Printer

0 Answers

how to fix pads on a epson stylus pro 7600 printer the pads need to be changed. smudging the ink. we changed it from standard to wide.

Jun 10, 2014 | Epson Stylus Pro 7600 InkJet Printer

0 Answers

epson 7600 error 10004

May 29, 2014 | Epson Stylus Pro 7600 InkJet Printer

See all Epson Stylus Pro 7600 InkJet Printer Questions

Related Topics

Epson Stylus Pro 7600 InkJet Printer Logo

952 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Epson Stylus Multifunction...

Epson Stylus Multifunction...

Epson Stylus Office Equipment &...

Epson Stylus Photo R1800 InkJet...

Epson Stylus NX400 InkJet...

Check Out the Latest Printers Report
Check Out the Latest Printers Report

View all Fixya Reports

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. Stylus Pro 7600 InkJet Printer...

Stylus Pro 7600...

Loading...