We shut our boot and trapped the hood of the above and twisted the metal part of the hood so it won;t go in the groovesof the pram
Please can you tell me cost of replacement or repair
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We had a similar problem. You can get replacement axles from the Phil
& Ted website http://store.philandteds.com/parts/index.cat for
US$8.99 plus postage and you can get new bearings (FR8-ZZ Flanged
Bearings 1/2" x 1 1/8") from www.usabearingsandbelts.com for US$7 per
pair including postage. (you'll need a pair for each wheel). If you buy
the whole wheel option (US$39)from Phil & Ted it doesn't come with
the axle and the axle definitely does not come with bearings. ;( Trust
Hi, I have the same problem with a Phil and Ted's Sport - but I believe I have the solution as below. This is taken straight from the Instruction Manual which you can view at: http://www.arango-design.com/Phil-Teds-Sport-Buggy-p/7890-0001.htm - towards bottom of page is a link to the instruction manual - which I was unable to get on the Phil and Teds website. Got this today but haven't tried it yet. Hope this helps. Really becomes clear when you see the pictures in the instruction manual. Regards, John Hood The sport hood is packed disconnected. To reconnect: 1. Locate sun hood and hold it facing down, as shown ‘a’. 2. Insert crimped wire ends into frame, through eyelets, ‘b’. 3. Lay hood back (to top of buggy). 4. Locate red coloured pocket at top of fabric seat and insert rear hood wires into each side, ‘c’ and ‘d’. 5.Open hood and attach domes, at bottom of hood, to main seat, ‘e’. 6. Pull eyelet at top of hood over pegs on each side of frame, ‘f’ Note that the windows in the hood are lined with a sun mesh of a lower shade factor than buggy fabric. Always use sun cream and clothing for protection of children in direct sunlight.