Question about TruTech PLV16190 Television

1 Answer

The remote control will no longer work even when I put new batter

I have a 19'' tv and the remote control has stopped working. I have the same tv in another room and can use that remote for the other tv so I know it is not the tv. Can you help me to repair or reset the remote somehow. I have already tried new batteries. Thank you.

Posted by on

  • karenbojak Jan 09, 2009

    One remote works for both tv's and the other doesn't work for either tv.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers

Sometimes the IR receiver bug in the tv goes out.

To clarify. The remote RM1 for TV 1 will not work on TV1, but the remote RM1 works on TV2.

If this is the case, answer is above.

Best Regards,
Charles

Posted on Jan 09, 2009

  • charles durando Jan 09, 2009

    This is a sad thing to say but there is a whole website about the quality of these Target brand tvs, with some info about ordering a new remote.

    http://www.iconnectdots.com/ctd/2007/05/...

    Charles


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NEW REMOTE


If it is a universal remote control, after battery replacement, you have to set it up with the set-up codes to your TV. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Mar 23, 2014 | Sansui 19" Class LCD 720p 60hz Hdtv,...

3 Answers

I have a Grundig GU22DVD TV/DVD combo and the remote has stopped working even with new batteries. We,ve just moved it to a new house and need to tune in the digital channels without the remote. Is this...


Take out the battery an hour,put in back in,have the same problems.The remote is dead.Try website like Remotes.com to buy an exact remote.Yes,u can use the manual control buttons on right side of the tv,but a little hard.

Sep 06, 2010 | Grundig GU19WDT 19 in. LCD TV

1 Answer

Remote control no longer works


all samsung tvs work with code 212 or 4 digit 0212

if you got new remote its the infrared pickup inside the tv needs replaced very cheap

Apr 18, 2010 | Samsung LN-T5271F 52 in. LCD Television

1 Answer

Bought LCD Emerson 19'' Flat screen, Manufactured May of 2008. I have tried all of the available codes to get the direct remote tocontrol the volume & turn TV on & off. Can you advise me.


if you have a universal remote control that you are trying to program . the newer ones have a 4 digit code .. the older ones have only a 3 digit code .. the ones with 3 digit codes often wont work with newer equipment ... the new type universal remotes cover a lot more types .. ... if you are trying to get the remote that came with the TV working .. then you can remove the batteries for 10 min .. when you put them back in it should default to original factory settings ..

Nov 29, 2009 | Emerson LC195EM9 19 in. LCD TV

1 Answer

My remote will not work


Dessasembly the remote control:
1.Clean,use the izopropilic alcool or 75%alcool or finest wisky the remote taste rubber pad.
2.Assembly the remote control,change the batteries(see the polarity).
3.Near on functional in the FM or MW radio (the distance to remote and speakerphone max.10cm) press any buttons to the remote control.If you can hear the emitent signal in the speakerphone ,the remote is work.
4.Try the remote to TV.If work is OK,if not change the infra LED.
The solutions is work 100%,I tested 25 years ago.

Sep 07, 2009 | Vizio VX32L Television

1 Answer

Remotes not working


If it works on other device but not the TV then it is the TV.

Aug 12, 2009 | Sharp LC-C4655U 46 in. LCD TV

1 Answer

Astar LTV-19BS 19" TV -


I contacted the retailer from whom I purchased the TV and he was able to advise me on the fix. He told me that the problem is the remote control, which has to be reset.

To do that hold the Enter button down for 10-seconds, the remote and the TV should reset. It worked just fine for me.

Mar 25, 2008 | Astar LTV-19BS 19 in. LCD Television

Not finding what you are looking for?
TruTech PLV16190 Television Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68341 Answers

Are you a TruTech Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...