Question about IBM Corded Phone IBM412CID

2 Answers

Continuous ringing I have had this problem before and the technical support gave me a reprogramming code that reset the phone. I have tried the code in my manual, STORE, *,#,*,# MUTE and it does not work. Help!

Posted by on

  • suzette whinnery Jun 05, 2007

    SWWEET thanks so much

  • Anonymous Jan 17, 2008

    My phone keeps ringing even after I program it . I can't enter 11 for the phone it comes up 11 than dissapears to 00 and it keeps ringing. The only way to stop it is to press DND. Than the phone can't call the other extensions. I have cleared it STORE, * # * #, MUTE. Tried to program extension number, STORE, 10, 11. MUTE. Still ringing and the EXT # comes up 00.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found this site because MY phone won't stop ringing. I was so happy to see your problem posted, because I was hoping to coattail for a solution. BUT then I found an old folded printout (2-28-03) of a FAQ from TTSystems (now out of business, I guess) that solved the problem. Here it is: The extensions have to be reprogrammed after a power outage. (My trouble started after a big electrical storm knocked out power to our building.) I guess the same is true of loss of power for any reason, maybe even unplugging them if no batteries, etc. Anyway, each phone's extension defaults to 11 after power is lost. The ringing happens because all the phones have the same extension number--11. So, reprogram them so that they have an extension number from 11 through 22. 1. Press [STORE] 2. Press [1][0] 3. Enter the two digit number you wish to assign to this phone. 4. Press [MUTE] A short ring will be heard to signal successful programming. I am so ridiculously happy that I fixed this. I hope it works for you.

Posted on Jun 05, 2007

  • Richard Jones Jun 05, 2007

    I meant: reprogram them so that each phone has a unique extension number chosen from the numbers from 11 through 22. I bet you figured that out, but the sentence was not clear.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The "Store*#*#Mute" thing worked THANK YOU!!
Now if only I could figure out how to set up phone lines.....

Posted on Mar 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The ring tone on phone has become continuous, can I reset this back to normal?
Try Resetting It Or Remove Batteries Should Take It Back To Factory Setting

Jul 14, 2015 | Lands Phones

1 Answer

How to reset my virgin mobile LG Flare?
You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Aug 27, 2012 | LG Flare Cellular Phone

1 Answer

How to format samsung l700 because password has been forgeted
Ring up samsung, be prepared to wait (i have done this numerous times) and ask them what the reset code is. you should be able to put it in the dial pad and it returns the phone to factory settings. the code they gave me was *2767*3855#
By the way it is called a hard reset

Mar 09, 2011 | Samsung SGH-L700 Cell Phone

1 Answer

My friend gave me his cell phone n81 8gb and he forgots his security code. I tryed to use the master code but it doesn't work ... I need to reset the security code please help me
you need to contact your service provider and ask for your PUK code.either ring them up or go on their website if you have an online account

Oct 17, 2010 | Nokia N81 Smartphone

1 Answer

We are unable to turn a ringer on, for when the general number rings, on one Mitel 5020 IP Phone, and we would like to make it so another phone doesn't have to hear the ring on the general number ring.
This is set on the buttons for the phone from within the system programming. Individual buttons can be set to NO Ring, Ring, Ring Continuous, Delay Ring, or Delay Ring Continuous.

Continuous meaning that even if you are on the phone, it will ring audibly on your phone. If it's not set to continuous, it will only give a blip.

You should contact your vendor for assistance in setting this up.

Aug 03, 2010 | Mitel 5220 IP Phone

1 Answer

Phone only rimgs once,how can i make it keep ringing
Go to Menu->Settings->Sound. Select the ring tone and look for the option where you can set the ringing to either continuous or once or only vibrate etc. Here select the continuous ring.

Nov 13, 2009 | Samsung J700 Cellular Phone

1 Answer

Installer Code needed for Bosch Security System Ultima 880
Only way is to factory default the unit and then only if the installer code was not locked. Either way the system will need reprogramming.You will need the instalation manual for this or you can try ringing Bosch Technical as they can remotely access systems if set up to do so.
Worth a call either way browse for your local agent.

Oct 11, 2009 | Kitchen Appliances - Others

1 Answer

Need to reset security code for Moultrie I60 I got from some guy at an auction, the code he gave was not correct. I can't let the wife know that it will cost more money to have Moultrie reset the code. She...
Moultrie has a "no exception" rule...original receipt, I presume from authorized dealer; $25, to cover reprogramming and shipping, and they will reset pass code to default...
Only other solution is to find a defective i60 and hope it doesnt have a pass code entered. Then swap boards.

Oct 01, 2009 | Cameras

2 Answers

Please help!
your fone need to be reprogram.refer to a certified personnel nearest you.

Feb 21, 2008 | Samsung SGH-E900 Cellular Phone

1 Answer

Locked Out
First and formost, What you will need to do, is contact Sprint/Nextel customer care, to get what is called the PUK codes, if you have your phone on a Business/Personal/Corp account, you WILL need to have verification. This WILL NOT force you to lose your contacts, also just a friendly tip, Reprogramming the phone will NOT make you lose your contacts.....ever.
The only thing that could possible to this, is if you do a master reset, through the phone security options * if you have a older Update version *.
Let me know how it goes,
Thanks
Justin
Please Rate Me.

Oct 15, 2007 | Motorola Mobility RAZR V3

Not finding what you are looking for?

View Most Popular

Corded Phone IBM412CID

  • Lands Phones

Related Question

The ring tone on phone has become continuous, can I reset this back to normal?

  • Lands Phones

Open Questions:

0 Answers

On My Smsung Office serv phone ds-5014s flashing light

Apr 09, 2014 | IBM Corded Phone IBM412CID

0 Answers

phone display contrast changed and display screen can't be read phone display contrast changed and display screen can't be read

Aug 10, 2012 | IBM Corded Phone IBM412CID

0 Answers

phone has crackling noises on one line - only on this phone and not the others have tried using different phone cords but this does not help

Apr 12, 2012 | IBM Corded Phone IBM412CID

Related Topics

IBM Corded Phone IBM412CID Logo

Related Topics:

1,468 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

IBM Lands Phones

IBM 900SP Phone

IBM Corded Phone IBM412CID

IBM 4900 4-Line Cordless Phone

IBM 900SP Phone

Top IBM Lands Phones Experts

Cindy Wells

Level 3 Expert

5586 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

David Burbee
David Burbee

Level 3 Expert

1871 Answers

Are you an IBM Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...