Question about Samsung SRV-960 VCR

1 Answer

Is there an internal battery in a samsung svr960a vcr? i can set the date and time but it will not advance.

Posted by on

  • 1 more comment 
  • mikeymoe Jan 09, 2009

    junk it again

  • mikeymoe Jan 10, 2009

    your offer sounds like bate and switch to me!!!

  • mikeymoe Jan 10, 2009

    if you dont offer free help as you advertize then i will look else where. seems like you want people to pay to get any answers!!! thanks but nothanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes!
Remove case lid via two screws at sides, one at rear (power unplugged) lift off, remove front panel -clips are above and below and you should see battery on left side of front pcb when panel removed.

Hey and chill out too .... I am just a dude like you looking for some info for a prob I have - just given a few moments of my time to help you out .. I hope someone does the same for me!

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My universal Philips remote dont have a "code search"button' or a "set-up button,what can I do


The subject header says it does and all the Philips remotes I am familiar with have it.

Jun 07, 2014 | Philips PM-4S Maganvox 4 Device Universal...

3 Answers

Panasonic =iv NV-MV40 , how to set the clock please


You can download the user manual for free from the Panasonic website.

Apr 03, 2011 | Televison & Video

1 Answer

How do i record a show onto a tape?


lets say you are hooked up correctly (cable to VCR in (from cable/sat box) & cable to TV from VCR out) and the VCR is set to Ch 3,, (PLEASE NOTE THE TV MUST BE ON CH 3)

program a recording
the VCR clock / date must be set and not flashing 12:00
then you go to menu, program a recording by imputing the start time / end time of the show and the date it will be recorded and Ch 3...(you might have to set your cable box for the same date/time as the VCR or manually turn to that ch you wish to record that morning or before you go to bed) put a new tape in the machine....

manual recording
a show,game or special comes on and you sitting and want to watch and record and even edit (no commercials) put tape in... press record button get the remote so you can pause (on commercials) and press pause again to resume recording

HAVE FUN

Dec 26, 2010 | Sony SLV-678HF VHS VCR

1 Answer

Can't switch on menu or the timer


clean the display and change battery in remote.

Jul 06, 2010 | Samsung SV3000W VHS VCR

1 Answer

I cannot set preprogramming on my vcr to the tv.


Have you set up the VCR on initial installation correctly!!
Remember correct date, day and time am/pm must be set firstly before any timed recordings can be done properly.

Jan 03, 2009 | LG MG64 VHS VCR

1 Answer

Settings disappear


I suspect the internal backup battery is faulty inside the machine. Sometimes it can be an actual battery soldered to the circuit board otherwise look for a low voltage high capaticance capacitor - for example 3.5v 10F. If you dont know how to check for these things then find a competant technician. Good luck.

Oct 04, 2008 | Sony SLV-SE820 VHS VCR

1 Answer

Akai VSG285 video - I can't tune any TV stations thru to the VCR?


This sounds like a hookup or programming problem.

The typical hookup is cable/satellite box output to VCR antenna/RF input, then VCR antenna/RF output to television input. Since you are able to watch pre-recorded tapes, the latter is already correct. There are other ways to connect, using the audio/video outputs of VCR to audio/video inputs of the TV. Older or low end TV sets may not have these connections.

If by chance you are using an outdoor antenna (not cable or satellite) then the antenna connects to VCR antenna/RF input and VCR output as above. You will also need to program the VCR into the stations- most late VCRs will scan for active channels, and program themselves to those channels.

I'm not sure of the capabilities of newer cable & sat boxes, but generally, you had to tune that box to the channel you wanted to record. The VCR is set to channel 3 or 4 depending on the output of the cable box.

Lastly, most VCRs of the last 10+ years require the remote to setup advanced functions, such as timed record, date & channel setup functions. The buttons on the VCR itself only do very basic functions, Stop/Play/Rewind/F-forward/Eject etc.

If you don't have the orig. remote, some universal remotes may be able to do advanced programming functions.

Apr 09, 2008 | Televison & Video

1 Answer

Setting date and time on a Mitsubishi VCR


My Solution for Mitsubishi HS-U500 VCR setting the date for 2008 and beyond:
I had same problem with this old unit as everyone else has.  Since the year really doesn't matter (except maybe when you're setting to tape near a new year), here's how to get the day and dates correct:
On the remote, push Menu button, then select "First time setup", then select "Set the Clock", then select the month.  Now, start adjusting the YEAR and watch how the "days" change with the years.  Adjust the years so that the "Day" (Monday, Tuesday, etc.) matches the date (1,2, 22, 23, 28, etc.) in the month.  Then cycle thru the rest of the items and get out by hitting menu button again.  
That's it!  That's my quicky solution.  Caveat: This may not be permanent with leap years and the like, so you may need to check it from time to time to make sure the days match up with the dates.  But you can do this when you go to set up for timed taping.  Hope that "FIXes" it for "Ya"!  

Jan 22, 2008 | Mitsubishi HS-U595 VHS VCR

2 Answers

Set a timed recording


Do you have your operation manual? It will tell you how to set up a timed recording. Recording options are set via the remote. Look for an option as "Scheduled recording" or similiar. Date, start & end time, channel, recording speed are all set. If you are missing your manual do a google search with your model number. A quick look at the Samsung website was not fruitful.

Jun 02, 2007 | Samsung VR3607 VHS VCR

Not finding what you are looking for?
Samsung SRV-960 VCR Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69808 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...