Question about Computers & Internet

1 Answer

My emachine motherboard sensors don't seem to be workn

Posted by on

  • 2 more comments 
  • jr1641 Jan 10, 2009

    I,ve switched the bios over to pci express both the motherboard isnt reconizing the pci graffix card

  • Anonymous Jan 10, 2009

    I went into bios settings and set the memory latency settings to aggressive. Upon rebooting, the system woul'd not start. I reset the bios by removing the battery and no go. Then I reset the cmos. All is working now except the m/b sensors are not registering and as a result the fans run full blast all the time. Under the hardware monitoring in the bios there is no input info. This is my cousin's comp and I really need to get this fixed. Please help!

  • markishandy1 May 11, 2010

    Can you be more specific...what is it not sensing, power, or devices. If its working I'd suggest doing a bios refresh...

  • hamid reza
    hamid reza May 11, 2010

    pliz explain more..



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 60 Answers

Try a couple different programs to test it. Try speedfan and check your bios.

Posted on Mar 19, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Recently had the exhaust system replaced and the P1273 OBD code now appears.What is the resolution?

P1273 Code Nissan Xterra Air fuel sensor Lean shift. Live ...

? 1:24
May 4, 2013 - Uploaded by momoy02
2005 Nissan Xterra MIL ON P1273 air fuel sensor LEAN SHIFT.... what is the meaning of the Data and how to ...

Aug 08, 2015 | 2004 Nissan Sentra 1.8

1 Answer

My emachinecomputer died model et1161

Emachines are prone to take the motherboard with the power pack when they go bad.
The are blogs on the wb for Emachines and every body states the same thing.. DON"T FIX IT REPLACE IT WITH A BETTER BRAND COMPUTER
I had one and did replace it. Emachines have no inline fuses to save the mother board as others do. That is one reason why they are so cheap to buy. Too many shortcuts in this brand of computer you see

Jul 25, 2010 | eMachines ET1161-01 PC Desktop

1 Answer

Need correct MOB location for power switch on emachine W3410.

what kind of motherboard did you change..?
try to search in the internet.. just type the name of the board and including the diagram.. sample.."ASUS MOTHERBOARD POWER DIAGRAM"...

Apr 27, 2009 | Computers & Internet

1 Answer

Emachine motherboard no model number

Check out this site provided for a program called SIW. Download the free english version and install. It will tell you everything about your computer that you ever needed to know. Check the motherboard section for your specifics, and try the sound card section to see teh specifics on your card. This will help you in your search for the correct drivers.

Apr 03, 2009 | E-Machines eMachines Desktop PC

1 Answer

Emachines t6522

Hi birm,
I can tell you that most likely the white wire is the ground wire. The others are positive. The two manual found on eMachine's site does not provide enough of detail.
In this manual see;
Replacing the front I/O Panel (Pages 168, 170 see number 5).

The information is not specific enough, my guess is the front panel connections is the cable to the far right. (Looking at the picture).
You can try by looking at the picture & hooking the cable as shown.
The white colored wire seems to face to the right. Than try the power on button. If system does not come on, turn the connector 180 & reconnect. Try the power on button on the case.

Listed at the bottom of the link below you can either chat with a tech or call tech. (Main site for the T6522)

User guide T6522;

Good luck birm!

I wish I could be more specific.

Jan 16, 2009 | E-Machines (308714) Motherboard

2 Answers

Cursor on hp laptop not workn

I had this problem on a company laptop. It is a problem with this model. It will need a new motherboard. Probably not worth it. Sorry

Jun 02, 2008 | HP Compaq nc6000 Notebook

2 Answers

Emachine will not turn back on

check the power supply.seems to be a comman problem.
e-bay is a good place to look for reasonably priced ones.

Apr 09, 2008 | E-Machines eMachines Desktop PC

2 Answers

Reseting the BIOS on eMachines 270

brand and type of ur mobo, in moust of the time a restore to factory defaults is the solution, or go to hardware monitor and disable the fan speed  sensor, or check on the mobo that the cpu fan conector is in the right place, if this will not fix le't me to know

Oct 18, 2007 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides